SolderSmoke Podcast #242 Mars, New Hams, Direct Conversion, SDR Console, Proficio, PSSST, 8 meters, A BIG MAILBAG

SolderSmoke Podcast #242 is available

Audio podcast:  http://soldersmoke.com/soldersmoke242.mp3 

Video:  (362) SolderSmoke Podcast #242 December 3, 2022 - YouTube

Travelogue: 

Mars at opposition.  Not as good as 2020 (see charts below)

SSSS Prep

Hearing aids and high frequency loss.

AirPods as hearing aids.

Out in the Shenandoah with a Baofeng.

Success among TJ High School students.

Satellite in space?

 

PARTSCANDY

 

Bill's Bench:

Direct Conversion Receiver:  IT IS ALIVE!  EVEN IN LTSPICE

PTO works very well.

Diode ring -- really needs a diplexer, Radio Marti.

AF amplifier simplicity.

But WHY can't you listen to DSB on a DC receiver? Now I know.

How does a diode detector work?  Is the envelope real?  Is it square law?

The benefits of writing... 1967 and 1966 articles on PTOs and 2Qs.

 

Shameless Commerce Division:

-- MOSTLY DIY RF!  NEWS FROM PORTLAND! Get your free Michigan Mighty Mite. 

-- YouTube Goal Reached.  Thanks! Keep watching.  Subscribe!

-- Keep buying from Bezos using the link on the right-hand column of the blog page.

-- Become a Patreon sponsor!  Left hand column of blog page.

-- I have ads on the blog page, but I have configured to avoid troublesome ads -- dating sites, etc.

 

 Pete's Bench

-- Stepper motor, LCD and Arduino for my little DC RX?

-- SDR Console

-- PSSST, BOMS, Schematics and spoon feeding...

-- Proficio SDR by Multus

-- 8 meters?

  

Mailbag

-- Alan Yates VK2ZAY now also W7ZAY PTOs, trivial motors, a broken ankle...

-- Dhaka Jack AI4SV formerly of Cyprus, Madagascar and Northern Virginia. has moved to France!

-- John WB5OAU/K5MO An old friend.  FMLA as "Glowbugs Noir"

-- Dale Parfitt W4OP on the Homebrew 2Q from 1967

-- Nick M0NTV Glue Sticks, PTOs, DC receivers and AM breakthrough testing.

-- Todd K7TFC suggests “cool” names for DC RX  PT Cruiser? PT109? PT73?

-- Levi replacing Selenium diodes in a Globe VFO.  I am not alone!

-- Juanjo EC5ACA wants to build DC RX .  FB.

-- Dave designed a discrete LM386.  Picked up by Jenny at HackaDay.  Can you build this?

-- George Zaff.  HamRadio Workbench Spiritual Brother of SolderSmoke.

-- Alain F4IET -- Still building DC receiver.  FB.  Sorry I got the call wrong.

-- Drew N7DA Building Pixies with 3D forms.

-- Toni G6XMO in Sheffield getting a 3D printer business going: https://www.whizz3dparts.co.uk/

-- Chuck KE5HPW restoring an old SW-54.  Pete is skeptical.

-- Lex and Jesse like Colin's placement of WYKSYCDS sticker on his Homebrew rig.

-- Jim KI4THZ joined the Vienna Wireless Society -- FB  on the faculty at GMU

-- Tony G4WIF suggested mechanical counter for DC RX PTO freq readout.  I have some in the junk box.

-- Our old friend Jonathan-san in W0XO now a Patreon sponsor.  Origato!

-- Thomas K4SWL sent him video of Tiny SA watching Vatican Radio sign off for the day.

-- Farhan and Chuck Penson liked blog post about Heathkit Digital Rig SS-8000 1978!

-- Ed KC8SBV working on DC receivers -- I recently used the Peppermint Bark box he sent.

-- Old friend Bob KD4EBM on the linearization of the R-390s.  Hard to homebrew one of those!

-- George from VWS trying to figure out how (if?) Marconi got his coherer to work DX...

-- Steve EI5DD sends Connaught Radio news: https://www.docdroid.net/Q1lBoyi/crnews1222-pdf#page=36

 

Won’t have another Podcast until the new year so Happy Holidays to all!  Merry Christmas, Happy New Year! 

 

The 2Q -- A Homebrew Solid-State Drake 2-B from 1967

This is really an amazing project.  Way back in 1967 (that's 55 years ago) John Aggers W5ETT of Ponca City, Oklahoma decided to homebrew a solid state version of our beloved Drake 2-B receiver.  Triple conversion.  No crystal filters.  Twenty two discrete transistors and no ICs. Tuned circuits at 50 kHz to provide most of the selectivity.  And he did it.  Just look at the picture above.  It even LOOKS like a Drake 2-B.  

I sent this to our friend Dale Parfitt, W4OP who more recently built a receiver like this.  He too was amazed by this project.  

The article by John Aggers is very clear and provides a lot of good information on how he designed and built this receiver using the technology of 1967 and junk box parts.  I was struck by the lack of diode ring mixers. And I was somewhat taken aback by his use of plug-in socketed transistors.  The AF amplifier is our still-familiar transformer-less push-pull complementary pair design. John did a wonderful job on the mechanical tuning and slide rule mechanism. 

Three cheers for John Aggers W5ETT.  This article is a reminder of the great benefit to the hobby of writing up a project and putting out there in the world.  Here we are, more than half a century later, reading John's article and learning from it.  FB OM.   

https://worldradiohistory.com/Archive-DX/73-magazine/73-magazine-1967/73-magazine-10-october-1967.pdf

Page 8

Michael Newton Hopkins, AB5L, Author of the FMLA series

Better than anyone else ever has, Michael Hopkins, in his fictional series about Frank Jones and the Five Meter Liberation Army, captures the spirit of homebrew radio.  There is just so much of us in those articles.  I read them some 20 years ago when they first came out; reading them again recently I appreciated them even more.  

Frank was a bit of a curmudgeon:  There are jabs at the appliance operators, Hiram Percy Maxim, hamfests, SSB, the Collins collectors, the QRP movement,  and even Electric Radio magazine.  Howard Armstrong makes an appearance, as do Carl and Jerry.  It all made me want to put a five pin SAW filter on my lapel.  

As I read, I thought about what a great writer Michael was.  When I Googled him, a few of the results led me back to  my own book.  I'd forgotten that Michael was in there, but he is.  On one page he advises me how to power my Mate for the Mighty Midget receiver without using a power transformer (a very Frank Jones approach).  On another page I note that Michael had sent me a kit for the Doug DeMaw "Barbados Receiver."  Wow, that was my first Superhet.  (I also have one that was built by Dale Parfitt.)  Most of the parts were put to use in other projects.  But I still have the board (see above).  Reminded that it came from Michael, I will now have to complete the construction.

Below is a nice article about Michael that appeared in the Flying Pigs newsletter. (Click on the images for an easier read.)   

The articles can be found here: 

http://soldersmoke.blogspot.com/2021/07/summer-reading-for-homebrewers-frank.html

Michael's 2005 Obituary:

https://obits.dallasnews.com/us/obituaries/dallasmorningnews/name/michael-hopkins-obituary?pid=14406223

Thank you Michael.  VIVA EL FMLA! 

QSO Today Interview with Dale Parfitt W4OP

Eric Guth 4Z1UG interviewed Homebrew Hero Dale Parfitt W4OP on the QSO Today podcast.   The interview is really great.  Listen here: 

https://www.qsotoday.com/podcasts/W4OP

Wow, libration fading.  Who knew?  

Dale has appeared in many SolderSmoke bolg posts and podcasts.  He is definitely in the Homebrew Hero category.  

Check out some of those blog posts here: 
https://soldersmoke.blogspot.com/search?q=Parfitt

and here: 

https://soldersmoke.blogspot.com/search/label/Parfitt--%20Dale

Thanks to Eric and Dale. 

SolderSmoke Podcast #212 HDR, Boatanchors, SDR, Antuinos, Spurs, QSX, Mailbag

Dale Parfitt W4OP's  SBE-33 with modern digi freq counter

SolderSmoke Podcast #212 is available: 

http://soldersmoke.com/soldersmoke212.mp3

22 June 2019

CONGRATULATIONS TO PETE:  Licensed 60 years today

Pete Juliano during Field Day, 1959

Sideband Engineers Models 33 and 34 -- Thanks Pete! 
Hans's QSX SDR Rig at Dayton-Xenia and FDIM
W8SX FDIM interviews

Pete's SDR Projects -- Update

The Peregrino SSB transceiver in the summer SPRAT

Why no rare earth cell phone speakers in ham projects? 

My HDR "waterfall" project

Farhan's Antuino
Cubesat origins
RF Lab in an box
SWR, PWR, SNA
Superhet receiver with ADE-1 at front, and log IC at the output
Adapters (SMA to BNC) help
DON'T BLOW UP THE INPUT RESISTORS (LIKE I DID!) 
My dirty DIGITIA -- Denial, then acceptance
FFT 
Useful programs:  SPURTUNE and ELSIE
A better bandpass filter for the DIGITIA 
The importance of a good test set up with Antuino

Manassas Hamfest: WA1UQO, W4WIN, AI4OT

MAILBAG: 
KG7SSB
WA3EIB
VK4PG
W3BBO
Jeff Tucker -- Who owns Drake 2-B #4215? 
KN4BXI
KC5RT
K3ASW

The Last Hallicrafters Transceiver...REBORN! TWICE!

Pete Juliano and his colleague Giovanni Manzoni led me this morning to the happy land of Hallicrafters hybrid nostalgia.

It all started with Pete's latest blog post:  
http://n6qw.blogspot.com/2016/10/more-junk-box-rigs.html

I admit that I had never even heard of the Hallicrafters FPM rigs.  Pete's (uh, I mean Giovanni's) video show's Pete's junk-box rebuild of the old rig.  Very nice.   Note the presence of the Si5351...

I needed more background info, so I turned to YouTube.  This led me to more old friends:  Dale Parfitt W4OP has a really nice video of his rebuild of the Halli FPM rig (see above).  From his video we learn why Dr. Juliano prescribed a dose of Si5351 for the patient:  Dale tells us that VFO instability was a major problem with this rig.   Dale fixed his with the addition of an X-Lock board from yet another friend of SolderSmoke: Ron G4GXO of Cumbria Designs. 

Dale really out-did himself by building an add-on accessory box for the FPM.  Very nice.  I especially liked the addition of the W3NQN passive audio filter for CW.   I always have misgivings about adding audio filters to Direct Conversion receivers -- this will reduce QRM, but you are still listening to both sides of zero beat.  But when you add a sharp CW audio filter to an SSB superhet you will end up with true "single signal reception."  FB Dale.  

Please send Pete Juliano and Giovanni Manzoni some positive feedback and words of encouragement.  Please urge them to keep up the good work on the blog and the videos.  Theirs is sometimes a lonely task -- without feedback it can sometimes seem like putting messages in a bottle and throwing them into the digital sea.   Please let them know that their work is being seen!  Leave some positive comments on Pete's blog.  (No snark please -- The Radio Gods will retaliate if you harsh N6QW's mellow.)

Preserving Vanguard 1

Ira Flatow of "Science Friday" was recently talking about how best to preserve important bits of the history of mankind's exploration of space.  Our old friend Vanguard 1 was mentioned several times.  It is now the oldest satellite still in space.

You can listen to the Science Friday show here:

http://www.sciencefriday.com/segments/protecting-the-historic-human-record-in-space/

They also have a transcript of the show on the same page.

SolderSmoke fans will remember the Vanguard adventures of Mike Rainey AA1TJ:

http://soldersmoke.blogspot.com/search?q=Vanguard

This seems to be the month for Vanguard:  just a couple of weeks ago, on 40 meters I spoke to Dale Parfitt W4OP. Dale was one of the first people to pick up Mike Rainey's Vanguard replica signals (see link above).

AND...

The Vanguard reproduction project came up during Eric Guth 4Z1UG's "QSO Today" interview with Graham Firth G3MFJ of the G-QRP Club:

http://www.qsotoday.com/podcasts/g3mfj

(Graham has such a great voice.  He definitely SHOULD build a phone rig!)

VIVA VANGUARD!  
  

A Lot of Soul in the Barbados Receiver

After a rather frustrating period working on the Hallicrafters S38-E, I decided to do something different, maybe work on something that isn't known as a "widow maker."    So pulled off the shelf an old Doug DeMaw Barbados Superhet Receiver.  "Barbados" sounds much nicer than "widow maker."  This design and this particular receiver have quite a history: 

-- DeMaw presented the receiver in the June 1982 issue of QST.  It uses six 40673 dual gate MOSFETS, an op amp for the audio, and a 250 Hz crystal lattice filter at 3.579 MHz using (YES!) colorburst crystals.  The local oscillator was a VXO. Doug's was for 20 meters, but his article provided a lot of info on how to put it on other bands.

-- I built one in 1997, building it for 20 CW.   That project is described here:

http://www.gadgeteer.us/RXHB.HTM

-- Sometime around 2000 I bought another one.  This one had been built on a FAR Circuits board by Dale Parfitt, W4OP.  Dale had used 5 MHz rocks for the filter and had used a varactor tuned circuit for the LO (with a DC-DC converter to increase the range).   I put it aside.  It sat on shelves in several countries for a number of years.  (I even have a THIRD one, a partially stuffed board that Michael Hopkins (the guy who wrote those great stories about Frank Jones coming back to life to retake the 5 meter band)).

-- I started working on it again around 2005. We were in London by then.  I put it on 17 meters using a capacitor-tuned VXO running up at around 23 MHz.   I did a quick and dirty broadening of the crystal filter by simply changing the capacitor values in the filter.  This worked, but obviously it needed refinement.  As I asked questions about this receiver, Dale Parfitt came to my rescue.  It took us both a while to realize that he was advising me on the receiver that he had built.  That was kind of cool.

-- I used the receiver with my first homebrew SSB transmitter.  I had them both running with separate VXO's, with crystals switched from the front panels.  I'm sure there were no other rigs like this on the air anywhere in the world.

-- By 2011 we were back in the US and I put my old homebrew SSB station back on the air.

-- In October 2014 I was building my first BITX rig.  I built it for 17 meters using a 23 MHz VXO.  I took the crystals out of the Barebones receiver.  Later that month I used an Arduino/AD9850 DDS arrangement as a digital crystal replacement: 

http://soldersmoke.blogspot.com/2015/01/digitizing-barebones-superhet.html

It worked, but it looked hideous.

-- By January 2015 I had learned a lot about how to characterize crystals and build filters.  I decided to take a shot at properly expanding the frequency response of the 5 MHz Barbados filter.  I measured the characteristics of the crystals and got the proper cap values for a 3 kHz filter.  When I tested it, the width seemed fine, but the ripple was more than I had expected.  Kind of disappointed I moved on to other projects.

-- Which brings us to today.  Escaping from the S38-E, I decided to put the Barbados receiver on yet another band.  With sunspot numbers in decline, I opted for 40.  And I wanted this to be an analog, L-C VFO project. No DDS, no PLL.  It would be all L and C for me, thank you! First I played around with the idea of running the VFO up at around 12 MHz, subtracting the 7 MHz sigs to get to the 5 MHz IF. But then I did a sweep of the filter.  First, there was a nice surprise -- the width AND the ripple were fine, just what I wanted (I must have had a measuring problem when I checked the ripple before).  And the skirt was MUCH steeper on the high side than on the low side.  This is why these filters are often called Lower Sideband filters.  You get better opposite sideband rejection if you use them as LSB filters.  

With the skirt situation in mind, I realized that running the LO at 12 MHz would not be a great idea. Our rule of thumb tells us that if we SUBTRACT the signal with the modulation from the signal without the modulation, we'll get SIDEBAND INVERSION.  So 7 MHz LSB would end up as 5 MHz USB.  Not great.  Plus, it is hard to get a VFO stable at 12 MHz.

So I opted to run the LO at around 2 MHz.  There would be no sideband inversion, and it would be easier to get the oscillator stable.   Wary of the threat of harmonics and spurs, I ran the receiver for a few days using an Arduino AD9850 at 2.125 MHz - 2.300 MHz.  It worked fine.

I now have the receiver running with a real Colpitts VFO.  The inductance is provided by an adjustable, shielded coil at around 1.5 uH (it was on the board) in series with a 3 uH toroid (type 6 yellow).  The feedback caps are at 2200 pf with a 1020 cap in series.  The main tuning cap is a small air variable with 73 pf max.  This only lets me tune about 40 kHz of the band, so, in a variation on the old Main Tune -- Bandspread technique, I have a rotary switch that adds capacitance in parallel with the main tuning cap.  I can now tune from 7.141 to 7.300.  The tuning rate is fine and I didn't have to mess with a reduction drive. 

More Barbados receiver blog posts here:

http://soldersmoke.blogspot.com/search?q=barbados

Kind of amazing that DeMaw designed this thing 34 years ago.  A lot of soul in this old machine.   

Broadening the Barebones Barbados Receiver

I've been working on the crystal filter of the Barbados Barebones Superhet receiver.  This was designed by Doug DeMaw in 1982.  This one was built by Dale Parfitt W4OP and then repeatedly modified by me.  It is now on 17 meters with a crystal-switchable VXO.    Earlier I had made a very crude attempt to broaden the filter from its original very narrow CW configuration.    This week I did this again, but this time I actually characterized the crystals and used Wes's LDA and GPLA software (from EMRFD) to design the filter.  

I played with the capacitor values and finally got the 3 kc bandwidth I wanted, but I'm having trouble getting rid of the ripple.   I know this is dependent on the impedances at the two ends.  The programs say I need 2000 ohms.   

I'm kind of puzzled about how Doug DeMaw did this with his original design.  For his crystals and his 250 Hz (!) bandwidth he said he needed 450 ohms.   He used 4.7:1 turns ratio transformers at either end and said that by putting 10k resistors across these transformers he got the needed impedance.  I can see how this would work looking into the gate of the 40673 IF amp, but looking back at the drain of the 40673 mixer, I'm not so sure that that would yield 10k. (See schematic below.)

But who am I to doubt Doug?   So I assumed he was correct about the 10K and I re-wound the transformers with a 2:1 turns ratio, thinking that would get me closer to the needed 2k.   But the ripple is still there.  I guess I could use a return loss bridge at this point... 

I don't know whether this is worth messing with anymore.  The receiver sounds nice.  The 3kHz bandwidth gives it a nice sound, and the ripple doesn't seem to be noticeable  That FAR circuits board is tightly packed and difficult to work with.  So, should I leave good enough alone, or should I proceed with fanatical ripple eradication.  Any advice?

BTW:  Why is it that receivers always seem to sound better when opened up (as above) on the workbench?  

 

 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Pete's 17 Meter VXO Transceiver (Video)

Pete:  

I like it!  You and I may be the only people in the world with that kind of VXO range control switch on the front panel!

 

I checked my VXO.   I run it at around 23 MHz.  I use two single crystals, also switched by a relay. 

The 23.144 rock tunes from 23.127 to 23.151    24 kHz

The 23.166 rock goes from  23.144 to 23.168    24 kHz

 So I could have had 48 kHz were it not for the overlap.  As it is, I get 41 kHz.  Not bad.

 

The reason I went with this LO freq was that I had these crystals from the Dale Parfitt/Doug DeMaw Barebones Barbados Receiver.  DeMaw had used color burst rocks for a 3.579 MHz IF, but Dale shifted up to 5 MHz. I could occasionally hear WWV!  (But with the 3.579 I heard W1AW in the IF!)

 

73

 

Bill  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

W4OP -- Earth-Moon-Earth and Another Barebones Superhet

Years ago I bought a Barebones Superhet from Dale Parfitt on E-bay.  Several years after that, having forgotten who I bought it from, I was asking questions about how to get it working on 17 meters.  Dale jumped in with some very helpful e-mails.  It took us both a while to realize that I was working on the receiver that he had built.  Dale is active in a really wide range of ham radio activities, everything from QRP to EME.  Check out his homebrew projects here (I really like his Solid State Drake 2-B!) http://www.parelectronics.com/par-homebrew-projects.php 
And his vintage projects here: http://www.parelectronics.com/vintage-radio-restoration.php
And here's what Dale has been doing with the Moon (that's his 15 foot dish in the picture): 

 

Hi Bill,

 

I thought of you today when I won a Bare Bones Barbados RX on eBay for $5. I am going to team it with a DDS VFO and a matching TX.Some parts are apparently missing, but i have a huge junk box and also know how to order from Mouser should the junk box fail me.

 

 

Right now I am putting my solid state 650W 1296MHz EME amp , Power Supply, meters etc. in its waterproof cabinet so I can mount it right at the dish and not incur any feedline losses.

 

1296 is probably the best EME band. Power is getting easier and easier to acquire (although solid state is around $5/watt), dishes are fairly easy to acquire or build and  perhaps most importantly, we all use circular polarity feeds with no relays/hybrids. Activity weekend can sound like 20M, with a number of stations just ragchewing on CW and SSB.

 

73,

Dale W4OP
for PAR Electronics, Inc.
http://www.parelectronics.com

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

AA1TJ -- As always, in the Vanguard

Here is a recent e-mail exchange between Michael, AA1TJ, and Dale, W4OP.  (Dale happens to be the fellow who built the W1FB Barebones Superhet that I am currently using on 17 meters. Details on this caper appear in SolderSmoke -- The Book). 


----------------------------------------------------
From AA1TJ: 


Wahoo...Dale, you amazing!

You are my first QSO with the Vanguard 1 reproduction satellite beacon transmitter. My circuit is a fairly close copy of the one shown on the lower left-hand corner of the 1959 CQ Magazine article (notice the output signal pick-off shown in this schematic is incorrect, or at least incomplete). My circuit uses link-coupled output impedance matching, which is similar to the only other documentation that I was able to dig up. The attached image "Early_Microlock_Bcn.jpg" was snipped from an original NASA report on the transmitter used in early airborne and sub-orbital tests leading up to the Vanguard flights. 

Yes, you heard correctly. I'm using a Philco 2N504 surface-barrier transistor, but please let me back up a bit. 

Roger Easton (a native Vermonter...and still resides here!) was at the helm of the communications development for the Vanguard/Minitrack project. Of the Vanguard "grapefruit" satellite beacon transmitters, he wrote in the May 2008 issue of High Frontier magazine

"We tried subminiature tube transmitters first. They worked marginally. Finally, Bell Telephone/Western Electric developed a very nice transistor for the task, and the problem was solved." 

However, that leaves out a small detail. They first tried Philco surface-barrier transistors, which worked fine on the bench, however two problems were discovered. They were found to be too temperature sensitive; the RF output power from the one-stage transmitter dropped excessively at elevated temps. Secondly, there was some issue with the packaging that produced erratic operation when the transistor was rotated positionally. The Western Electric devices proved better on both counts. 

The WE transistor appears to be "unobtainium" these days. That, plus the fact that my circuit won't be flying up to space anytime soon, prompted me to settle on a Philco 2N504. Although my device was manufactured in September of 1959 (Vanguard TV-4 - re-Christened "Vanguard 1" - first orbited on March 17, 1958), the 2N504 was an off-the-shelf item on the launch-date.

The only other obvious difference is the Vanguard 1 beacon circuit operated on 108MHz, whereas mine is presently working on 14.0596MHz. I recently had it running as a beacon on 10m for 48 hours but I had no luck given present band conditions.

The receiver is a simple, 0-V-0 regenerative set using a single Raytheon QF721 (fabricated in February 1953). I heard little activity on 20m when I started up my auto-keyer this morning. I had it looping 3X1 CQs whilst I worked on another project. To make matters more difficult, the exhaust fan was running in my shop and it happened to be raining heavily when you called. Worse yet, the receiver had drifted off my calling frequency by the time you called. I barely discerned a high-pitched CW "1" or "J"...which prompted me to quickly switch off the fan and re-tune. You were subsequently a solid 579. 

Of course my heart jumped when I heard you calling me...how I love that feeling! And it was a fabulous QSO so far as I'm concerned. Following our contact I opened my metal index card file box and pulled out the QSL that you sent to me following our "Code Talker" QSO. To think I now have another happy memory to add to that one! Thank you once again, Dale. It figures you'd be the one to pick-off my unannounced presence on the 20m QRP calling frequency with 25mW. Well done, OM. 

Also, you might enjoy this video of the actual launch, including some interesting control room audio banter. It may be found here: http://www.nrl.navy.mil/vanguard50/index.php. The way at least one of them nervously repeats, "Keep going baby!" gives some indication of the pressure these guys were under...having failed so spectacularly on two previous occasions. 

All the best,
Mike, AA1TJ    
        

On Mon, Jun 25, 2012 at 11:51 AM, Dale Parfitt wrote:

Hi Michael,

That was fun!

I first heard you on my SG-2020 rig, but did not have a paddle handy, so I fired up the K3. I don't ever recall having QRN on 20M, but it was  bad. Without it, you were 579 and even with it, 569 towards the end of the QSO.

I just happened to be QRV on 060 listening when I heard your CQ's. Not bad for a 25mW signal from (I think you said) a Philco transistor.

73,

Dale W4OP

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Putting 17 Meter SSB Station On the Air

Magnificent, don't you think? The sun is rising over Northern Virginia, and 17 meters is starting to come alive. Yesterday I finished the tweaking and peaking of the JBOT amplifier for the transmitter. It is nice and stable now. (And yes, Steve, it has a low-pass filter!) On top of the transmitter cabinet is the receiver. It is a Barebones Superhet designed by Doug DeMaw and built on a FAR circuit board by Dale Parfitt, W4OP. I changed it to 17 meters and broadened the filter response for use on SSB. Both the transmitter and the receiver use variable crystal oscillators, with two crystals in each (switch-able from the front panels). The frequency coverage of of the transmitter and the receiver match up fairly well (good thing!). Wish me luck! Today I will venture forth amidst the coronal mass ejections and try to make a few SSB contacts on good-ol' 17.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Amateur radio at PAR (W4OP)

An e-mail exchange on QRP-L this morning about using ceramic resonators in 455 kHz filter circuits (great idea Grayson!) led me to the ham radio corner of the PAR electronics web site. PAR is the company run by Dale Parfitt, W4OP.
http://www.parelectronics.com/par-amateur-radio.php.
That's a nice looking 2-B Dale! Please send us the serial number! Even more impressive is Dale's award-wining homebrew solid state version of the 2-B (on the far right). Visit his web site for more info (on his site you can hover your mouse above the pieces of gear for more info).

I'm proud to say that I have a piece of gear in my shack that was built by Dale Parfitt. The story is told in SolderSmoke The Book: I'd built my own version of Doug DeMaw's Barebones Superhet and had liked it a lot. When I saw another one (this one built on a FAR circuits board) for sale on e-bay, I bought it. It stayed on the shelf for a while. Years later when I started working on it, I turned to QRP-L for help and this fellow named Dale Parfitt came to my rescue. It was only after a long series of e-mail exchanges did we realize that the receiver we were discussing had been built (and sold to me) by... Dale Parfitt.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Dale Parfitt, W4OP, Homebrew Hero

Yesterday, in my search for pictures of the Drake 2B, I came across VE3MPG's excellent interview with Dale Parfitt, W4OP. Dale and I crossed paths years ago: After I built my first version of Doug DeMaw's Barebones Superhet, I went out on the net and found a couple of kit versions of this receiver for sale. A few years later, I was working on one of them, and turned (as you do) to QRP-L for some advice. Dale came to the rescue and we started exchanging e-mails. After a while he told me that the version I was working on sounded familiar. Sure enough, he was the original builder! The story appears in SolderSmoke -- The Book.

Here is further evidence that Dale and I have similar tastes in receivers: Pictured above is his solid state version of the Drake 2-B. FB! I note that the dial scales are the same as the hollow-state version.

Here is the VE3MPG interview:
http://ve3mpg.blogspot.com/2008/10/interview-with-dale-parfitt-par.html