EXORCISM! 40 Meter RFI Problem Resolved

BEFORE

David W. suggested I use my RTL-SDR dongle to look for the source of the 40 meter RFI that I have been mentioning.  (It appears as an ugly stipe in the waterfall of my Hodgepodge transceiver.) So I fired up the RTL-SDR -- there were the tell-tale spikes, spaced neatly every 50 kHz.  The ARRL Handbook says this is typical of a switched power supply.  Before I started patrolling the neighborhood with a tin-foil hat and a portable receiver, I decided to check my own house for any recently installed electronic devices.  It didn't take long -- when I unplugged the new (mid-pandemic) treadmill the spikes disappeared.  This treadmill was located about ten feet above my rigs, and between the rigs and the antenna.  Duh.  I should have thought of this earlier. Mystery solved.  Thanks David. 

AFTER

ZL2CTM's Simple SSB Transceiver

Congratulations to Charlie Morris ZL2CTM for his first contact with his Simple SSB rig.  

There are so many cool things in Charlie's video, starting with his mention of having been woken up early (2 am)  by the very strong earthquake off New Zealand.   Exhibiting true homebrew spirit, Charlie apparently went straight for the shack and worked on his rig.  FB OM. 

Al fresco!  I love the spacious layout on the board and the obvious division into stages.  And I like the wooden board that holds it all together. 

I like the idea of two bandpass filters -- this is simpler than switching one from transmit to receiver.  

Hooray!  Homebrew diode ring mixers!   Yes! 

I think Charlie follows the UK convention with his T/R switch -- they have up as off.  I may be wrong but I think most US homebrewers have up as on, and up as transmit.  Cultural differences. 

Notice Charlie touch-testing the heatsink during that first QSO.  We all do that. 

I like the 24 volts on the IRF-510 drain.  Allison always said that IRF-510s run better at 24V than they do at 12V. 

Of course I disagree a bit on the issue of analog VFOs. But this is just a matter of personal circuit preference. 

Charlie's calculations and notes are really wonderful.  His candid discussion of impedance matching is especially useful.    I think his use of loose-leaf  sheets of paper is wise and it paves the way for a useful folder for each HB rig. 

Here is the introductory video for Charlie's Simple SSB project: 

https://www.youtube.com/watch?v=BgQUG0AImKY&list=PLxU5OX0SLgIPdYj_MZG03CeimbRU6Btml

Here is Charlie's 10 part video series on his simple SSB rig: 

https://www.youtube.com/playlist?list=PLxU5OX0SLgIPdYj_MZG03CeimbRU6Btml

And here is Charlie's YouTube channel: 

https://www.youtube.com/c/CharlieMorrisZL2CTM/videos

Thanks Charlie! 

Over the Waterfall into the Dark Side: Hodgepodge SDR

This one's for Pete. My effort to add features and modes to my Hodgepodge transceiver took a dramatic turn when I connected the rig to my computer via an RTL-SDR dongle. Woohoo! A Hodgepodge waterfall! Check it out.

The dongle was modified for direct sampling at HF. In the box with the dongle I have one amplifier stage, consisting of a 40673 dual gate MOSFET and one parallel tuned circuit, now tuned to the Hodgepodge IF of 11.998 MHz. I tap the the Hodgepodge's BITX40Module at the output of the first mixer, just before the crystal filter. This was a lot of fun. I can even check my own signal on transmit! This is like having the best of both worlds.

"The Secret Life of..." Tribal Knowledge!

It is great to hear that Tim Hunkins is producing this new series.  It looks like it will be largely about "know-how" -- about what we'd call "tribal knowledge." 

The SolderSmoke Team Talks to the River City Amateur Radio Communication Society (Video)

Pete and I had a great time speaking to this really nice California ham radio club (video of the event appears above).  Special thanks to club president Dr. Carol Milano, MD.  Wow, what an impressive person and ham radio operator she is:  https://www.qsl.net/kp4md/#New%20York

This club is doing a group build of a version of the famed Tuna Tin Two.    I mentioned that I had held the original TTT in my hands, and that Rex Harper had conducted a "Mojo Transfer Ceremony" that imparted TTT Mojo to my BITX17 transceiver (which was also discussed).  I promised to share the video of that momentous event.  Here it is: https://youtu.be/9RZRaFUtTcc

Thanks to Carol and the members of the RCARCS.  This was a lot of fun.  

A Frequency Counter for the Hodgepodge -- An Analog Solution to a Digital Problem

Imagine my dismay when I discovered that I could not use my $5 San Jian PLJ6-LED frequency counter with my Hodgepodge transceiver.    The problem is described here: 

http://soldersmoke.blogspot.com/2021/02/a-problem-with-san-jian-plj6-led-counter.html

This video describes my solution.  I took some pleasure in using an analog solution to solve a very digital problem.   I know this could have been fixed with one or two changes to lines of code, but I liked doing it this way.  This was all kind of fun, and it allowed me to use yet another bit of circuitry that was sitting idle in the shack.  That is the whole point of the Hodgepodge project.  

The best is yet to come.   Especially for those of you who like waterfalls.... Stay tuned. 

Novice Rig Roundup -- This Year in Memory of Bry AF4K

 

Bry was a good guy and one of our sponsors.  RIP OM.  And the Novice Rig Roundup was his thing. 

http://ve7sl.blogspot.com/2021/02/here-comes-2021-novice-rig-roundup-nrr.html

Putting the Quarantine Hodgepodge Rig on CW (Video)

Putting this rig on CW posed a real Hodgepodge challenge: What did I have laying around that would let me do this? Then I remembered: Years ago I built a little 750 Hz audio tone generator. So I pressed that into service. I also needed a sidetone so I built a little RF-actuated circuit that turns on a piezo buzzer when I go key down. And I put a little DC monitoring device (recommended early in 2020 by the Ham Radio Workbench podcast) between the power supply and the rig. There is more to do! Stay tuned.

Jean Shepherd Goes to a Hamfest -- And Much More

Here is something nice to listen to in your shack...  

I hadn't heard this one before.  It is about Shep's teenage trip to a hamfest, but it also about his youthful enthusiasm for ham radio and electronics.  Many of us can identify with this very easily. 

He talks about what must have been a very early use of "blue boxes" -- the audio tone generators that allowed young miscreants (including the Woz) to make long distance phone calls for free. I wish I had gotten into this.  It sounds like fun. 

He talks about how painful it was to be on phone (AM phone) with just 2.5 watts homebrew, when everyone else was running a lot more power. 

And wow, they played a baseball game at the hamfest.   Phone guys vs. CW guys. 

I won't spoil it by telling you the results of the hamfest raffle.  

Update from the Wizard of Wimbledon -- "Always listen to Pete"

In a recent podcast, Pete mentioned that Leo Sampson (the young Brit who is rebuilding the sailing yacht "Tally Ho") should seal the deal with his girlfriend.   Well, it seems that "life coach" should be added to Pete's already impressive list of abilities (homebrew hero, pasta chef, guitar player, etc.)  A while back Pete gave similar advice to Jonathan, M0JGH.   This morning, Jonathan reported in, confirming that Pete's advice was completely correct.  A "mixing product" arrived early in the lockdown. Congratulations to Jonathan and his remarkably radio-tolerant wife.  It seems Leo should be shopping for a ring. 

--------------------------  

Dear Bill and Pete

I hope that you and your families are staying very well during these extraordinary times.

I wanted to thank you both for the reminiscent shout-out during the last podcast, whilst you were suggesting that Leo Sampson of sailing yacht Tally Ho should "seal the deal" with his girlfriend. If our case study is indicative of his future prospects, he absolutely should do! Not only are we happily married but we welcomed a bubbly baby girl into our family at the start of lockdown. (I note that hams refer to children as “harmonics”, but wouldn’t mixer products be a more appropriate metaphor?) 

Apologies for my radio silence of late. Circumstances have allowed me the rare and special opportunity to take more of a lead with parenting, and so my soldering iron has only been wielded for maintenance purposes rather. Your discussion about the intrigue of distant voices emerging from homebrew rigs has whetted this CW addict's appetite to build something for SSB or even DSB, and likely for one of the higher bands...

I feel that I should briefly stick up for the art of CW, though. As a keen amateur musician the ability to communicate through rhythm will always hold a special charm, particularly when you consider that many of my regular EU chums on 40 and 80 are easily identifiable by their “distinctive fists”. I recall a true WW2 spy story in which a double agent, I forget which, was rather unwell but still had to be carried into the radio tent to send his CW whilst lying on a stretcher, otherwise the Germans might notice the absence of this distinctive fist and realize that the game is up!

73 from Wimbledon

Jonathan

M0JGH

EI7CLB's Ladybird Receiver (George Dobbs Design), and Voice over the Internet

 

I suggested that Tryg once again gather the parts to build George Dobbs's Ladybird receiver.  He should use the same wooden base.  That would be great.  

As for VOIP, I told Tryg that SolderSmoke got its start in a VOIP program  called Echolink -- Mike KL7R and I used to converse from London to Alaska.   Mike recorded one of  our conversations, and that became SolderSmoke #1.  I was using VOIP even before that -- from the Dominican Republic in the mid 90's I was connecting my Radio Shack 2 meter HT to an early VOIP program Internet  Phone or I-phone.  The company that made it was an Israeli firm called Vocaltech.   

---------------------------

Hi Bill,

Thanks for the recent emails and podcasts. I have attached a picture of my first radio - or at least what is left of it. I plundered it for parts down through the years as you can see. It is the build from the late Reverend George's "Making a Transistor Radio", the Ladybird book that really put the hook in me all those years back. I was probably only 11 when my late Grandmother and I went to Dublin by train (300 mile round trip) to Peats of Parnell Street to buy what components my pocket money could afford in order to build the first couple of stages of the radio, The wooden base was cut for me by a worker at a local furniture making factory here in Galway. He got a great laugh out of it when I told him I was going to build a radio - he kept putting the wooden blank up to his ear and joking: "I can't hear anything yet!". I will always remember it.

On another front I wanted to thank Pete and yourself for an entertaining and informative couple of podcasts. I made the leap a couple of months back and bought a set of boards for a uSDX (W2CBA version) but I may just use it as a receiver if I ever get around to building it. I don't know yet. The kit that Pete mentioned in episode #228 really got me excited. I expect you can imagine that my imagination is running riot at the moment.

Finally, I would be interested to hear about your take on half duplex VOIP apps such as Peanut. I realise that it is not 'real' radio to many but I have enjoyed several contacts with operators around the world with it and it has been quite satisfying. These ops that I have spoken with have often been infirm, elderly or have mobility issues. There are also a couple that are under HOA restrictions. One OM in particular lives in a retirement village and is a full-time carer for his wife. I think it is a good thing that they can still be involved in radio without all of the physical demands it might make on them or annoying their neighbours. It might, at least, it might be a worthwhile topic for discussion. Thanks again for an excellent Podcast. BTW, I am a bit of a guitar nut too - is that a Stratocaster that Pete is holding in the picture on the Soldersmoke Blog Page?

Right ho, time to put the kettle on. Tea is a vital component for operational efficiency in my radio world!

73,

Tryg de EI7CLB

Quarantine Hodgepodge Rig -- Part 1 (Video)

More videos to follow.  I have added features, and a transmission mode.  Stay tuned.