Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
In many ways it was for guys like John W8UC that we launched this project. These are guys who have been hams for a long time, but -- like most hams -- never built anything. Most guys don't see this as a problem. But some guys just don't like to think of themselves as "appliance operators." For years the ARRL and others told hams that receivers were just too difficult for them to build. We found this not to be true. So we launched this project, first at a local high school, then to a larger group.
In his comments John says he has been an appliance operator for 48 years. Well, you are an appliance operator no more John -- you have built a receiver.
John wrote:
I can hear the signals on a receiver I built so I am super happy about that... I have learned more in the last month about how a receiver works than I have in the last 48 years of being an appliance operator. Thank you Dean and Bill. 3. Would like to build a transmitter next. Also a receiver for another band.
---------------------
For more information on how you too can build the receiver:
Dean and I often say that we too have learned a lot from this project, and that the receiver has gotten better as a result of all these builds. But in KE2AMP's case we really see an innovation that nobody has used before. But it is a great idea and it solves the "loose screw" problem of the PTO. Check out the spring on John's PTO. That is really smart. Thanks John.
John also sent me a crystal wrapper that will long be cherished by the CBLA (Color Burst Liberation Army):
John wrote:
Well I completed my DCR, and am receiving signals on 40 meter at 1900UTC. My audio amp will oscillate if I turn up over half way and my pto is little loose and makes it bit hard to tune. I put a light spring behind the pto bolt to give it some friction and tighten up. I’m thrilled that I’m receiving signals. I still want to add a front panel to mount the volume pot, the on/off switch and speaker if I have the room.
I am so Thankful to Bill, Dean and everyone on the discord for this project I learned so much more being able to ask questions and follow along with other builders as we worked through each stage of the build. I definitely learned some things about oscilliscopes. And testing each of the stages as we went along.
I would like to try my hand at a SSB transmitter to go along with this receiver. I have built a working MMM but was just to see if I could. I don’t know CW
Oh and I included pic’s of something Bill will like.
Pick it up at a ham fest last summer.
Will that get me into the color burst liberation army?
Thanks Again, 73
de John KE2AMP
Consider yourself inducted John. The CBLA needs innovative people like you!
-------------------------
For more information on how you too can build the receiver:
It was really great to hear those Australian voices coming from Phil's receiver. Check out the video above.
Phil writes:
Completion! So pleased, it works really well. And there were lots of lessons for me along the the way. Thank you Dean, Bill and Pete, it's been a great way to get me into homebrewing. 73s from sunny Queensland. Phil VK4PG
I also like Phil's front panel. Note how he put to use the circular piece that remained after cutting the speaker hole; that became the tuning knob. FB Phil. Thanks.
For more information on how you too can build the receiver:
Derek N9TD was another of the early builders of the Direct Conversion receiver; he has done really magnificent work. He is an Electrical Engineer, and you can see in his work (and in the email below) the tension that exists between the desire for simplicity and the urge to improve. In the above photo, for example, we see that Derek had already gone ahead with the installation of an RF gain control. We also see his use of a steel screw and an outboard coil in series with the PTO coil. All of these mods are fine -- I have used all of them. We just advise newcomers to build the basic receiver first, then put in mods from there.
Derek has gone the extra mile (many miles in fact) by building a Double Sideband transmitter to go along with his receiver. We know many will want to do this. Our advise remains: Build the basic receiver first, get it working, then do the mods, perhaps culminating in the build (as Derek did) of a Double Sideband transmitter and the creation of a DC-DSB transceiver.
Here is a video of just the receiver in action.
Note that the DSB transmitter circuitry is on the board:
And here is Derek demonstrating a phone contact with the resulting DC-DSB transceiver:
Derek wrote:
Bill,
Let me introduce myself, I am a recent electrical engineering graduate from Purdue and a long-time listener of the podcast. I want to thank you and Pete for being one of the reasons I chose to pursue my degree in the first place. I'll admit that in the more difficult stretches of getting my degree, I often pulled out the podcast to be reminded of the fun that can be had with radio and electronics.
Until recently I had to hang my head low along with the majority of the other 'appliance operators' out there having never built anything with my two hands that can be used to pull signals out of the ether.
I am no stranger to building projects, PCBs, and melting solder but I usually chose to either stick to the dreaded digital domain or focus on antennas, filters, and other ancillary equipment. The logic being that I like to have a "known good" radio for the shack and that I would focus on other equipment to supplement the radio. I still follow this logic when I want to contest and we all know that antennas are well worth the effort, I've just finally had enough of being an appliance operator and have your podcast to thank for the extra push.
I had been following the original effort of the TJ DCRX with interest from the start and earmarked this project as one I would like to build based on its inherent simplicity and good performance. However, the demands of school and a recent (at the time) abortive attempt to build an AM superhet with an SA602 the year prior made me (I got as far as feeling the joy of oscillation but regretfully petered out after that) put this one the backburner for about two years until December 2024.
By coincidence, I independently decided to start this project just before your show with the HRWB folks and the gauntlet being thrown down, which has spurred many to build this receiver. It has been great to see the extra coverage on the receiver, and the commentary has been very insightful for someone trying to build this for the first time and with as many of the "improvements" as possible.
For better or for worse, I'm the type of guy who wants to understand the "why" behind all the design choices and, from there, try to incorporate as many lessons and improvements as possible to make the "best" version possible. I'm not saying I make the best version of anything, but it's just a quirk of the way I think and justify doing a project. It always has to be "this and some additional improvement;" otherwise, I would decide against doing it.
Rambling aside, I ended up building the DCRX, adding the RF attenuator from N3FJZ's website, and incorporating the lessons you learned after experimenting with improving the tuning on the PTO. I added an external series inductor wound on a dowel rod and used a zinc-coated steel screw as opposed to brass. I found that this gave solid tuning performance across 40m and was easy enough to tune in CW or SSB signals (after 3D printing a large knob for the PTO bolt). Alan W2AEW's video on mixers was a great tutorial to use to verify that my mixer was mixing. With the radio assembled I was treated to the joy of hearing my receiver breathe in the sounds of 40m for the first time last weekend and even managed to copy some Croatian DX during last week's contest. As Farhan said to do, I have spent the last few days enjoying the receiver and figuring out its quirks before moving on to the next step.
The only "issue" I have noticed is that I still get some AM breakthrough despite tuning in the bandpass filter. The problem is very noticeable if I accidentally put my finger on the wires going to the AF gain pot. If I do that the AM station is the only thing I can hear. This makes me think the problem is after the bandpass filter and more investigation is needed. Maybe using coax on the control lines to shield it will help? Regardless I am impressed with how well the receiver sounds, the stability of the oscillator, and the effectiveness of the simple audio amp....
Again thank you and Pete for your work on the podcast and for helping inspire countless homebrew radio operators!
73s,
Derek N9TD
--------------------
Thanks Derek. And thanks for helping other hams get the 3D printed PTO coil forms that they needed.
For more information on how you too can build the receiver:
A few of the builders are so new to the hobby that they don't even have ham licenses yet. That is the case with Chris from Wales.
Chris writes:
Here’s mine up and working, antenna is now 84’ of wire from a window to a tree with 33’ counterpoise hanging to the ground. Just for the record I have absolutely no experience of radio and only one year of messing around with electronics. I’ve learnt more in the last 4 weeks thanks to you guys. It has been a great experience. Thanks
I replied that if there were any justice in the world, Chris would be given a ham license just on the basis of having built this great looking and great sounding receiver. You can hear it handling some 40 meter SSB signals in the clip above.
Thanks a lot Chris!
For more information on how you too can build the receiver:
Scott KQ4AOP's build of this receiver is especially noteworthy, becasue he used the receiver to hear the very first ham radio signals he ever received. I don't think any of us can make a similar claim.
Scott wrote: "Those first sounds were my first time ever hearing any Amateur Radio first hand!" You can see Scott's deep commitment to homebrew: "I want to build my own gear for 40m. I want to learn morse code. I want my first contact to be on my own gear." Wow Scott, the building of the receiver is the hard part, and you have already done that. I think you are well on your way. In the video above you can watch Scott tune the entire 40 meter band and a bit beyond. You hear CW at the low end. Then FT-8. Then SSB. Up just above the top of the band I think you can hear our old nemesis Radio Marti. And this powerful broadcaster is NOT breaking through on the rest of the band. FB Scott. Congratulations.
Matt was one of the first builders of this receiver (see above). He heroically stuck with the very small speaker that we had used in the high school receiver.
Matt wrote:
I just wanted to publicly thank you for doing this. I’m sure it’s been a lot of work but I’m very grateful for the experience. I’ve always wanted to home brew and I’ve done a few little things such as filters and attenuators but this has really given me the motivation to really dive in deep.
I’m 44 and I’ve only been a ham a few years so hopefully I have lots of time ahead to get others excited about home brewing. We have a very active club here in KY and there are quite a few folks mildly interested in home brewing, I’m going to push some of them to start a builders group in the club with me. This is entirely due to the effort you have put into this project!
Thank you.
Matt also builds balloons with tiny solar-powered ham radio transmitters aboard. These balloons fly around the world. He is advising Vienna Wireless Society on their balloon project. Just last night Matt wrote:
In case anyone is interested, my balloon that has been spending a lot of time in the northern latitudes popped back up again today after being quite for nearly two weeks. Looking at the path prediction on HYSPLIT it's going to make another loop to the north but at least the earth is tilting back to give me a more favorable solar angle. It's only going to get better as spring rolls in.This balloon lost a little altitude shortly after launch for unknown reasons so it's not quite a high as I would like but as long as it can stay away from spring storms, it should still have quite a bit of life left in it. This one is still flying on my old callsign. I got my vanity callsign when I thought the balloon had gone down, then it showed back up. Whoops, oh well, I tried. Matt NE3U
Peter VK3TPM is a long-time member of the SolderSmoke community. He is a software developer and technology commentator based in Melbourne. But that digital background did not stop him from diving headfirst into this highly analog project. He fought a lot to get the stages of his receiver working properly. The AF amp was full of challenges. He overcame all of them and ended up with a very fine looking and sounding receiver. See above.
Going the extra mile, Peter took his newfound abilities into the world of phone transmitters. He whipped up a 75 meter DSB transmitter and used it to check into two Australian Technical nets:
This is really great. You can see the look of pleasure and pride in Peter's face as he uses his machine to send his voice far across Australia and into Tasmania. This is the kind of satisfaction that comes from homebrew.
I am encouraging him to combine the his DC receiver with additional stages (perhaps from the DSB transmitter) to make a DC-DSB transciever.
Thanks Peter!
---------------------------------------------
For more information on how you too can build the receiver:
Our Direct Conversion Receiver is being built around the world, but one of the most exotic locations for a build is the island of Bali in Indonesia. There Wayan YD9BAX set out to build the receiver.
Early on, Wayan noted that he would have difficulty getting the 1000:8 ohm AF output transformer we were using. This transformer was easy to get if you have easy access to Mouser, but a few prospective builders in Europe and the U.S. expressed deep objections to our use of this device. Some complained that we should have used a push-pull amplifier. Others complained that they didn't have one of these in their junk box. Some even hinted that we should have gone with an LM386 chip. But we stuck to our plan, noting that the very simple AF amp circuit we had developed would be understandable in ways that the alternatives were not. Still, I worried about Wayan. He might have really been out of Mouser range.
Yesterday the above video appeared. Wayan finished the receiver. It is inhaling nicely on both SSB and CW. The CW signal you hear in the recording is that of YB1IHL. That is CW from Indonesia as picked up by a homebrew recevier. FB!
How Wayan cracked the code on the transformer is inspiring. He essentially homebrewed the part. Wayan wrote on the Discord server:
At last I can hear the CW and SSB coming in. The one and only 9v battery that I have during homebrewing forcing to switch to bench PSU with 9,3v setup Pardon me for the messy board and layouts, excitement that it works with parts I have in hands is everything. I learn a lot during this project, including inability for sourcing 1k:8 audio transformer causing me to build my own xformer from 600 ohm transformer former and magnet wire from a broken relay, tedious works but I learn new things. Need to tidy up and may need to build another mixer and BPF again.
He also homebrewed the PTO coil former.
Wow, that is all really inspiring, and is a great example of the homebrew spirit at work.
Aaron ZL1AUN used his homebrew SolderSmoke Direct Conversion receiver in a 40 meter SSB contact with his fellow New Zealand radio amateurs. His transmitter was a modern commercial rig, but his receiver was the Direct Conversion receiver.
I think Aaron's video is an excellent demonstration of how stable and useful this receiver really is.
The next step for many will be the construction alongside the DC receiver of a Double Sideband transmitter. You could make it with only the receiver PTO serving as the common stage. Just build another mixer, a mic amp, and an RF amp with low pass filter. Switch the DC voltage and the antenna from T to R and you will be on the air, on phone, fully homebrew.
Here is an article describing how I did this on 17 meters in the Azores in 2001:
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Bill's OTHER Book (Warning: Not About Radio)
Click on the image to learn more
Where are the readers of SolderSmoke Daily News?
Pete Juliano N6QW
Master Homebrewer
Dean Souleles KK4DAS
With beret and with a Michigan Mighty Mite in hand
USE IT OR LOSE IT!!!!
-
*USE IT OR LOSE IT!!!*
I am referring to the paucity of QSOs, here in the NE USA, especially on
75m.
Similarly, the activity on this forum has really red...
The Ides of March are soon to be here!
-
Leave it to my Roman ancestors to make things hard -- just look at the
Roman numeral counting system, and so it was with their calendar dates. The
Romans c...
Enjoyed the Yarra Valley Hamfest
-
Victoria seems to have a good number of hamfests and today's at Yarra
Valley was excellent. I bought a variable power supply which I hope is
lower noise th...
The Communicator March - April 2025
-
*Lots happening...*
You will find some great articles in this issue, along with our regular
columnists.
Now read in over 165 countries, this issue brings ...
40m Pelican Case SSB Transceiver
-
See YouTube channels for details:
http://www.youtube.com/c/CharlieMorrisZL2CTM
*Test code for the LCD and Si5351*
#include
...
Hollow-State Design, 3rd Edition
-
Hollow-State Design, 3rd Edition is available from: Lulu Press:
tinyurl.com/hollowstatedesign3 eBay: search for “hollow-state design”
Electric Radio bookst...
I Finally Bought My Dream Airplane
-
Aviation has been a love of mine since I was a very little person. Living
in Nevada, seeing posters and ads for the Reno Air Races, specifically the
Texa...
2000 47pF Caps ...
-
An unexpectged package arrive in the mail today. Did you ever wonder what
2000 47pF NP0 capacitors look like? Thanks to John, AB2XT I will never run ...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
Raduino as NBFM TX
-
Here is a neat, 30 minute hack for your Raduino to turn the Si5351 into a
pretty stable, solid NBFM transmitter. The hack is to add a varactor diode
in ...
QRP Labs shop!
-
[image: Shop]
All QRP Labs kits may be ordered online securely at the shop, with PayPal
payment.
*Click here to visit the shop!*
*Click!*
*Shop! Order...
Posts
