Hi Def 360 Degree Panorama from the Mars Perseverance Rover

Put this on full screen view and set for max Hi Def presentation. 

You can stop the video around the 1:10 mark, but then still use your mouse to pan around for a full look at the area (without the annoying labels that appear at the beginning).  

M0NTV's Latest FB SSB Transceiver

Wow, Nick has a really wonderful rig and has made this great video to explain it. 

Elements that I really liked: 

-- The simple mic and compression.   Very nice. 

-- Termination Insensitive Amps.  TIAs Rule! 

-- Grey Altoid-like boxes. 

-- Diplexers!  Yes! 

-- Doug DeMaw S-meter. 

-- No AGC.  

-- Pentium CPU cooling fan. 

-- References to EI9GQ (I must get his book!) 

-- Al Fresco!   Good luck with boxing it up Nick. 

Santo Domingo Shack on 12th Floor Balcony -- SST QRP CW

June 2021.  We were in Santo Domingo, Dominican Republic.  At this point we were in a 12th floor apartment in the center of the city.  I would take my SST 20 meter CW transceiver and EFHW antenna out on the balcony.  I made no contacts from this location, but one of  my CQs was picked up by K9TM on the Reverse Beacon Network (see below).  All the other RBN spots were the result of calls from the eastern tip of the island. (Click on the RBN image for a clearer view.)

 

Good News! The Termination Event May Be Coming Soon! Solar Cycle 25 Could Rival Cycle 19!

Wow.  Cycle 25 might be as good or better than Cycle 19.  Pete cut his radio teeth on Cycle 19.  I was born during that cycle.  Let's hope these scientists are right!  See chart below. 

https://spaceweatherarchive.com/2021/06/11/the-termination-event/

Thanks to Thomas over at SWLing Post for alerting us to this important news.   

Tom's Receiver -- A 20 Meter Superhet Built From the Junkbox

Wow, this is really an amazing project.  It is so good that I'd like to believe that it is really "all our fault," but the credit obviously goes to Tom, the very intrepid builder.  In a more just world, Tom would be given a ham radio license solely on the basis of this project.  Great work Tom.  We look forward to more Solder Defined Radios from your workbench.   

Dear Bill and Pete,

I stumbled across your podcast a few years ago. I had no interest in
amateur radio, I was just looking for an electronics podcast that
actually discussed electronics (naming no names here, obviously).
Well, the inevitable happened, and some of your enthusiasm rubbed off
on me. I now find myself humbly enclosing a photograph of my first
homebrew receiver for 20m.

The project was one of those "spontaneous construction" affairs,
triggered mainly by breaking up an old satellite receiver (I've
honestly no idea what it was for) which yielded up several SBL1s and a
10.7MHz crystal filter - these form the key elements of the new
receiver. It's a full SDR (solder defined radio) of a conventional
single-conversion superhet arrangement. The chief abnormality is that,
because the IF filter is as wide as the proverbial barn door, I only
use "one edge" - the other half of the passband being provided after
conversion to baseband. Of course, that only works if there are no
massively strong stations in the 6kHz above where you're listening,
but it seems to be ok most of the time. It does give me the advantage
of being able to adjust the lowpass point of the AF signal by
adjusting the BFO, which is nice.

You'll notice there's a lot of "digital nonsense" in the picture, for
what's supposed to be an analogue radio. This "supervises" the two
VCOs: There is an FPGA which implements a pair of frequency meters and
an STM8 microcontroller which is in charge of adjusting the control
voltages to keep the VCOs where they should be. It's all slightly
roundabout because I wasn't clever enough to design a PLL which would
give the required resolution (and I wanted to do something "more RF"
than throw down a DDS chip). 
This gives me stability as well as fancy bells and whistles, like
numeric readout, tuning info via RS232, automatic scanning and
frequency presets. I've used a (cheap) industrial/automation style
encoder for the tuning control, which gives a lovely analogue-like
action.

Despite my best efforts (and a lot of ferrite in strategic places) I
wasn't able to keep all the digital spurs out of the receiver. So I
devised a dirty hack by way of a button which will shift the MCU an
DAC clocks to a different frequency. I can't remove the spurs, but now
I can hide them!

So far I've played with a "long" wire and a little shielded loop for
antennas - I'm in a first floor flat with a lot of noise locally, and
my plan is to get a loop up in the loft space (so the next project
might be a rotator!). I fancy maybe seeing if I've space for an
inverted V, too.

You'll notice that I've not attempted a transmitter. That, of course,
is because I'm not yet a licenced ham! However, I'm intending to put
that right sometime later in the year. Then - who knows - I might make
a contact!

Thanks for reading (although really it's the least you could do given
that this *is* all your fault) and I hope you've enjoyed hearing about
all the trouble your little podcast has got me into.

Keep up the good work gentlemen,
73 from South-West England.
Tom.

PS. I also have a copy of Bill's book, which I've very much enjoyed.

Pete's Drakes

Pete Juliano N6QW has on his blog two very nice videos about the Drake A-line.  

As long-standing fanatical fan of the Drake 2-B, I was struck by the similarities between the 2-B and the R4 seen in Pete's video:  

-- The S-meter is the same. 

-- The passband tuning control and indeed the visible internal circuitry for the passband tuning seem to be the same.  

-- Drake even used the same "hook" for selectivity selection.   

The transceive feature with the T4 seems very nice.  

Pete's first video is above.   Pete's second video, showing his first contacts with the newly acquired A-line, can be seen here: 

http://n6qw.blogspot.com/2021/06/2021-fine-wine-ans-seasoned-women-get.html 

Thanks Pete! 

Dino's Test Gear -- KL0S at FDIM 2021

Great test gear advice from Dino KL0S.  Thanks to Dino and to QRPARCI!  

 

VK3HN on Scratch Building (Video)

Lots of wisdom and good info in Paul Taylor's presentation.

Paul's comment on the impact of abundant LiPo power in the field -- we no longer have to scrimp and optimize power consumption -- was very interesting.   

And thanks for the nice mentions of the SolderSmoke podcast. 

Thanks Paul!

https://vimeo.com/showcase/8253187?page=5

The Perpetual Troubleshooter -- John F. Rider -- W2RID

https://en.wikipedia.org/wiki/John_F._Rider

To Mars in 1964 -- Building the Camera and Radio Systems

This is a really excellent video showing how JPL engineers and technicians designed, built and tested the first video camera system sent to Mars. 

-- It was essentially a Slow Scan TV system built around a Vidicon tube. 

-- Data was sent back in digital form. 

-- The first Digital-Analog conversion was done using COLORED CHALK!

-- The method used to protect the Vidicon tube from vibration was derived from the packing material used to mail the tube to JPL from Texas. 

-- During testing, JPL had all the circuitry spread out in what we would call "Al Fresco" style. 

Thanks to Dan Maloney at Hack-A-Day for alerting us to this.  Dan has an excellent article about the mission here: 

https://hackaday.com/2021/06/03/mariner-4-our-first-up-close-look-at-mars/#more-480934

Remastered! The Secret Life of Radio -- With Updated Comments from Tim Hunkin

Thanks to Stephen 2E0FXZ for alerting us to this important video. 

We first posted about the original many years ago.  We were delighted to learn that they have remastered the video and added 10 minutes of retrospective commentary from Tim Hunkin.  

Here are some of my reactions after watching the updated version:

-- The Marconi videos were amazing.   I actually met Elettra at a diplomatic reception in Rome.  

-- I was pleased to learn that Marconi was trying to "call up" Mars.  FB OM. 

-- My son Billy and I sat in that same Royal Institution auditorium where, 100 years before, Oliver Lodge had demonstrated spark gap technology. 

-- Tim's comment on the connection to supernatural beliefs was right on the mark.  We found out that the house we lived in in London was a center for occult beliefs and practices. 

-- Those square lantern batteries brought back fond childhood memories. My first power supplies.

-- The Rexophone -- used by Rex. 

-- Very cool of Tim to homebrew a coherer.  Extra credit for that.

-- One of the capacitors looks familiar.  EF Johnson? 

-- I agree with Tim -- crystal radios are a must-build for true radio hams.  And do it with galena and a cats whisker. 

-- Finally, the RCA ad introduces a term we might want to surreptitiously enter into the Enhanced SSB lexicon:  That "Golden Throat" sound.   

QRP - QRP Contact from Dominican Republic

It took some brass pounding on my homebrew key, but on May 28, 2021 I made a real QSO from the eastern tip of the island of Hispaniola.  KJ4R came back to my CQ near 14.060 MHz. I was running just 1-2 watts from my SST transceiver to an end-fed half wave antenna. Ed KJ4R was in South Carolina running 5 watts, also to an EFHW antenna.  TRGHS.  Thanks Ed.  And thanks to Bob Scott KD4EBM and Wayne Burdick N6KR.

Farhan's sBITX -- Combining SDR with the Traditional Superhet

Here is Farhan's amazing presentation to the virtual 2021 FDIM event.  There is a lot of tribal knowledge in this video.  Lots of old and new technology.  I was especially intrigued by Chris Trask's Kiss mixer.  Farhan's discussion of simple Arduino-based speech equalization and compression made me think that I have work to do in this area. And of course, Farhan's whole discussion of how to bring SDR into -- literally into -- the circuitry of a uBITX is really cool and very educational.   

TRGHS: K3ZO heard from the Dominican Republic

We arrived in the DR just yesterday, and this morning was my first chance to do some ham radio stuff. I fired up my old Sony SW receiver (the one with the busted BFO fine tuning control) and tuned to 20 meters. The very first station I tuned in (after adjusting the BFO with my Swiss army knife) was talking about the Cicadas.  He described weather similar to that which we had just left in Northern Virginia.  Then I heard the call:  K3ZO.  It was Fred Laun up in Maryland!  When I first came to the DR in 1992, the locals were talking about Fred as if he had just recently past through.  I learned, however, that he had been there during the 1960s!  He had left quite an impression.  He had saved one of the local hams during the 1965 political violence.   I gave that same local ham some Vibroplex parts so that he could fix up an old bug that Fred had left him. 

Wow, it was really cool to have Fred Laun be the very first ham I hear during this trip. The Radio Gods Have Spoken.   We need to spend more time (especially winter time!) in the DR!

I have a video of this listening session that I will post when we get back to Virginia. 

Looking for the Apollo 10 Lunar Module

https://www.universetoday.com/142505/apollo-10s-snoopy-lunar-lander-may-have-been-found-in-space/?fbclid=IwAR3xwZowaqKwpK46DXW6u_LbfVu_Co86kq1fpR3ZmaDrqoUouICeIf9bLuI

Parasets, Parachutes, and Tubes in "A French Village" Season 3

https://en.wikipedia.org/wiki/Un_village_fran%C3%A7ais

In season 3, Episodes 7 and 8, resistance members parachute in from London.  They are equipped with what looks a lot like a paraset.  One of their tubes develops an open filament.  The Germans engage in radio direction finding.  The Morse code is fairly good (but not great).  All in all, there is quite a bit of radio-related material. 

"A French Village" is a very well-done series.  But it is (of course) quite dark. 

Michigan Mighty Mite, Joy of Oscillation, and the Color-Burst Liberation Army in Washington State

 

Perhaps its the result of a vaccine-induced relaxation of COVID tensions, but for whatever reason we are seeing a resurgence of interest in the Michigan Mighty Mite and the Color Burst Liberation Army. 

Dan AF7O describes his excellent MMM CBLA adventure here: https://af7o.campclan.net/?p=144  Extra points for the use of George Dobbs' Ladybird book technique, and for the 3D printed variable cap holder (made by Dan's son). 

Yes Dan, rebuild that antenna, build an LP filter, and get that MMM on the air.  At the very least you can get some reports from the Reverse Beacon Network.  And, as Jack NG2E recently demonstrated, it is possible to make contacts with a simple rig like this: 

https://jackhaefner.blogspot.com/

LONG LIVE THE COLOR-BURST LIBERATION ARMY! 

VK3HN's Homebrew 30 Meter SST QRP Transceiver

It turns out that many people homebrewed SST rigs.  Here is Paul VK3HN's version.  Really nice. 

https://vk3hn.wordpress.com/2016/12/27/summit-prowler-two-a-scratch-built-30m-cw-transceiver-wilderness-sst-for-sota/

AA7EE's Amazing Homebrew SST QRP Transceiver

 

Look at that rig.  It is truly a thing of beauty.    

I was very pleased to see Dave AA7EE's comment on my SST rig.  This caused me to search his site for his SST article.  And wow, it is an SST treasure trove.  Lots of discussion of the circuit and mods. And Dave's usual wonderful photography and videography. 

Check it out.  

https://aa7ee.wordpress.com/2016/09/09/a-scratch-build-of-n6kr-and-wilderness-radios-sst-for-20m/

Thanks Dave! 

Cicadas Arrive in Northern Virginia

Usually the only bugs we talk about here are dead bugs (components with their leads up on circuit boards) or perhaps CW keying devices.  But in the last podcast I mentioned  the arrival in Northern Virginia of Brood X Cicadas.  They are coming to the surface after 17 years underground.  This morning I found this amazing animation that explains the lifecycle of these fascinating creatures. 

This morning Elisa mercifully took the time to take several dozen of them off the tires of her car.  

Here is the animation.  Just scroll down to follow the life cycle. 

Be sure to turn on the audio!  

https://www.washingtonpost.com/science/interactive/2021/cicadas-lifecycle-brood-x/?fbclid=IwAR39n951RzQfNPvr3iurHjCDcnDEj2ues0c1UmJFiYV8k5vwO2NZoekKN18