ZL2CTM's Homebrew Transceiver Project

Wow, Charlie has a lot of very cool ideas in this initial video.   Some suggestions: 

-- With the IRF-510 in the final, beef up the heatsink, and follow Farhan's lead by including an option for 24 volts on the drain.  That would take you  up to 20 watts or so (for those who are so inclined). 

-- Could that Teensy SDR board work at the IF frequency?  If so, consider putting it ahead of the crystal filter.  This would enable us all to join the Waterfall Signal Purity Police Force. 

-- I love the OLEDs too, but I found them to be noisy.  I minimized the noise with shielding around the OLED and active decoupling on the power line to the AF amplifiers.

More of Charlie's work here: 

https://plus.google.com/107506245856154702088

Audio Clips from N2CQR/HI8 Contacts with MIR Space Station (now in mp3)

Back in 1995 I was in the Dominican Republic.  I used an old 2 meter rig and a homebrew 5 element quad (see below) to talk to U.S. Astronaut Norm Thagard on the MIR space station.  (You may have heard me bragging about this before.) I made a bunch of audio clips from the contacts.  They'd been in the now defunct RealAudio format, but I have been able to convert them to mp3.  You can listen here: 

http://www.gadgeteer.us/CLIPS.HTM

Real-Time 3D on an OLED Display

Oh man, I thought I was so cool when I got the OLED to display 7215 kHz and other frequencies.  Then I see this.  What next?  Real-time 3D SDR Waterfalls?  On an OLED?  Holograms?  

From: 
http://hackaday.com/2017/08/08/atmega328-3d/#more-267887

Alaskan Road-Kill Microphone

I got a kick out of Paul's message from Alaska -- on my bench I have an almost identical project, including the sink strainer (see below).  And of course the now-iconic SolderSmoke podcast mic is just an electret element inside what used to be an IKEA floor lamp. 

N2CQR Lamp Mic 

Hi Bill and Pete,

I have been following your and Pete’s adventures on Soldersmoke for a while and want to say that each episode always brings some of my past experiences to the surface.  I have been fiddling with radios and electronics for over 60 years, licensed since 1964.

I needed a mic for Bitx40 build and started thinking about this as I was working on other projects. Every day I walk a mile and a half to my mailbox. Wednesday’s and Friday’s happen to be the days of trash pickup and people put the trash bins out next to the road for pickup.  Last week I spotted a little desk lamp sitting on top of one of the trash bins with the cord cutoff so on my return from the mailbox it was still there and it followed me home.  (fig1)

Removing the shade left a flexible vertical support for a mic, (fig 2).

Your recent podcast you mentioned your D-104 microphone, that was my first mic once I had phone privileges back in ’65.  Scrounging through my treasure box I came across a 1 ¼” to 2” PVC pipe coupling that looked just like the basis for a mic. A few hours of mediation and a couple hours at the lathe and mill produced a mic with stand and a PTT switch (fig 3).

Some scrap bin aluminum and a free lamp from the trash and another hour at the lathe, (fig 4 & fig 5). And yes, it has some heft as the base has a large hunk of cast iron in it. Will admit I spent $1.24 for the sink strainer that sacrificed itself to become the grill ala D-104.

The self-satisfaction of building your own gear and accessories is one of the rewards of this hobby, can’t buy that in a store. And repurposing someone’s trash into something useful is a plus.

Keep the soldering iron hot.

73’s

Paul KL7FLR

Wasilla, Alaska

PS JoAnn’s is one of my favorite places for finding useful materials.

Please Help This Guy

From time to time we use the SolderSmoke blog and podcast to try to help those in need.  We have close ties to the Dominican Republic and often become aware of people who are in real trouble in that country.  Here is case of a man who really needs some assistance.  Please take a look and consider helping him out.
https://www.gofundme.com/ramons-medical-treatment