Sam WN5C Builds a Michigan Mighty Mite and Takes it to Lake Thunderbird

 

Sam WN5C built a Michigan Mighty Mite and then went the extra mile by putting it on the air from a field location.  And what a great name this location has for a QRP operation:  Lake Thunderbird. 

Sam wrote up his experiences for K4SWL's QRPer blog: 

https://qrper.com/2023/05/guest-post-lake-thunderbird-k-2792-with-a-homebrew-transmitter/  

Below is a picture of the rig.  NOTE THE LOW-PASS FILTER.  FB OM. We wouldn't want that rig tearing up the electromagnetic spectrum. 

Looking ahead, Sam writes: 

Next step is a DC receiver (maybe the high school receiver?) and then a more substantial transmitter married together, I think. This is all incredibly fun.

Thanks Sam! 

Nine Homebrew Transceivers by Walter KA4KXX (and some QRP and QRO RC planes)

 

Our friend Walter KA4KXX in Orlando recently sent us this really cool "family photo" of his homebrew rigs.  Be sure to see the key that explains the photo (below) FB Walter.  Thanks too for the model airplane pictures. (Click on the images for better viewing.) 

Walter wrote: 

I recently realized that I am now operating nine homebrew transceivers, which would fit nicely in an “aerial” photograph, so I grabbed my stepladder and everything did fit well in the frame.  Six of them come from the BITX side of the family, with #1 and #7 direct conversion and #9 a single conversion superhet but using the NE602.  More basic information is included in the sketch.

I tried a Si5351 VFO once in the dual-band rig #4, but by the time I built the QRP Labs kit with so much closely-spaced soldering, and then added sufficient filtering and amplification to properly drive a 50 ohm load, I was exhausted!

These nine were created during the past eight years, and were preceded by eight more transceivers that I can document, but those have all been disassembled, with many of the parts being used in these later rigs.  I build my transceivers to be operated often, and since 20 Meters has been hot lately, for example, my POTA Hunter log shows over 300 CW and SSB contacts in 2023 alone, so rig numbers 7 - 9 have been earning their keep lately.

In summary I have created a lifetime total of seventeen transceivers so far, and although I am nowhere near the fifty-plus tally of Pete N6QW, I did spend a lot of years instead homebrewing many radio-controlled model airplanes of my own design.  Two photos show one example that I flew in the 2011 Blue Max Scale R/C Contest at the Fantasy of Flight Museum in Polk City, Florida against some stiff QRO competition.

—Walter KA4KXX

How they Make Raspberry Pi 4 Single Board Computers

So, if the Raspberry Pi is a key part of your new "homebrew" rig, how much of the rig did YOU actually build? 

Germany: Direct Conversion Receiver Success!

Dear Bill,

Please my apologies for my late update on our DCR project. We started with the course in the semester break and once the semester started only a handful of students were able to finish their receiver. A long shelf of shame .... 

Here is what we've got so far (those were finished at the end of April already). 3 nice DCRs completely sufficient to copy CW indoors without additional antennas starting from late afternoon. Strong stations can be heard all day. I found that coupling some 6m of wire with one or two windings to the ferrite core can boost the signal dramatically but can also increase noise. 

The PTO is based on your design (Bill Meara N26QR &  Dean KK4DAS) which was sparked by Farhan  (VU2ESE) , except that I've swapped the FET for a NPN. The input amplifier and antenna is from the JUMA active ferrite antenna by Matti Hohtola (OH7SV), the band pass filter is from Hans Summers (G0UPL), the mixer and the headphone amplifier is inspired by Pete Juliano (N6QW), you told me that the diplexer (as well as the whole DCR idea) is attributed to Wes Hayward (W7ZOI) and the perfect schematics of Rick Scott (N3FJZ) where crucial to get me started in the first place. I enjoy keeping track of original sources, as I would do in science. This shows that even little achievements are based on the ideas of many other great people -  and this is nothing to be ashamed of. 

This was a lot of fun! Thank You!

Best and yours sincerely,

Andreas

Wow, the direct conversion re-engineering of education continues, this time at graduate-school level with biologists in Munich!  Amazing.  

Andreas points out that his group was also plagued by semester-related problems that caused many additions to the German shelf of shame.  Let's hope that someday soon these builders will come to their senses and join the ranks of those who have finished their homebrew projects.  

Looking at the schematic (below) of Andreas's project, there are a couple of significant differences from ours:   

-- Their AF amp used a transformer-less push-pull design.  We had considered this but abandoned it thinking that it would be too complicated to explain the workings of this circuit to our students.

-- Most significant, is Andreas's use of a ferrite rod antenna and an RF amplifier.   I think a simple 33 foot quarter wave antenna (with a ground or a counterpoise) might work better.  But hey,  to  each his own!   The important thing is that a number of these receivers were successfully built.  They look beautiful.  

Congratulations to Andreas and the successful Munich homebrewers!  

 

Canadian Build of the Direct Conversion Receiver -- Do This in Your Town! (Video)

This is so cool.  We have been getting reports from Daniel VE5DLD up in Regina, Saskatchewan, Canada.  Daniel is a teacher and he has been building the receiver with a group of students.  

They have been doing very well.  They may end up having more success than we have had here.  

This morning Daniel fired up his build of the receiver and it was inhaling 40 meter signals.  You can hear the CW and the FT8 and you can also hear shortwave broadcast signals just above the 40 meter frequencies.  Congratulations to Daniel!  He is now one of very few radio amateurs who has homebrewed a receiver.  I think his students will soon do the same.  

Daniel's students have built several of the boards and appear to be on the brink of full success.  

Their PTOs look very nice. 

The AF amps were the most challenging of the boards.  Theirs look great.  Excellent soldering. 

We want the receiver project that we carried out at our local high school to serve has a model for others.  After all, we got our inspiration from Farhan in Hyderabad.  We want to see this kind of homebrewing continue.  All of the information on this receiver is on our Hack-A-Day.io page: 

https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

We strongly encourage others around the world to find ways to use this project to teach analog electronics.   We think the circuit strikes the right balance between simplicity and usefulness -- when they are done, the students will have a useful receiver capable of worldwide reception.  

Please let us know if you are building this receiver; we are especially interested in the use of this receiver in student-focused group-build projects.