Homebrew SR-71 Blackbird (with real jet engines)

DXing with Crystal Sets

Mike Tuggle has an excellent article on this subject in the Antique Wireless Association's on-line archives of the "Old Timer's Bulletin. " Here's the link:
http://www.antiquewireless.org/otb/dxxtal.htm
The link for the Antique Wireless archive (another treasure trove for us) is:
http://www.antiquewireless.org/otb/archive.htm

Our New R/C Electric Airplane

We are thinking that olive groves are not quite as forgiving as the corn fields that the kid in the picture is using. And the bit about "no experience needed" probably should have a "as long as you don't mind crashing." Oh well, I guess crashing is part of the learning experience. But a quick review of the pertinent R/C airplane forums reveals there may be problems with this wing design: Apparently when it stalls, one wing stalls before the other (i.e. it "tip stalls"), with catastrophic results. The plane has a very comforting ACT ("Anti-Crash Technology") feature, but the forums advise that this feature may cause more crashes than it prevents.

We have the plane back on the Rome workbench this weekend. Crazy glue and tape are being applied. We will be back out at Chinghale International Airport (i.e. a clearing in the olive grove) next weekend to see if we can get a few good flights out of this thing.

Radio notes: The radio control system is on 27.145 MHz FM.

Stradivari, Violins, Sunspots, and the Maunder Minimum

I mentioned Antonio Stradivari in SolderSmoke 120, but I felt a bit guilty about it, because there wasn't much of a connection to radio. But Nick, KB1SNG, has come to the rescue. Nick sent me this interesting article that discusses POSSIBLE connections between the quality of Stradivari's violins and the sunspot count. Check it out:
http://news.nationalgeographic.com/news/2004/01/0107_040107_violin.html

A recent article in The Economist alerted me to the fact that OM Stradivari was busy in the shack, churning out mechanical audio oscillators well into his 90's. I thought that Stradivari's late start, and his success in his senior years makes him an inspiration for many of us. A quick look at the Strad-Wiki page confirms this: Stradivari didn't really hit his stride until age 54, and did his best work between age 54 and 81.

New antenna for the HW 8 station

Now that my HW 8 station has been moved indoors (good thing -- there was snow on the hilltops this week!) I had to put up a new antenna. I decided to go with the same design that I had earlier: a dipole fed with TV twin-lead. I knew I needed a bit more wire than I had used in the original -- I had trouble getting that antenna to tune up on 80. So I went to the local hardware store and asked for 20 meters of AC line cord. That cost me 8 Euros. Not bad.
We had a nice sunny afternoon on Sunday -- Billy and I took the line cord out into the olive grove and pulled apart the two wires. (Hint: Start from the center, and pull slowly, or else the cord will get all twisted and a two minute job will turn into a twenty minute exercise in untangling.) I got to use some of those Radio Shack "solder strips" -- I just wrapped a few around the connection points and applied heat from a cigarette lighter.
I put some parachute cord (550 cord) over a conveniently placed tree branch using the venerable rock and rope method. One throw was all that it took. The radio gods were smiling on this project.
Success! With the Trastevere flea market Pi network, the thing tunes up nicely on 80, 40, 20, and 15. I notice that the cheap CB SWR meter that also I picked up at the flea market doesn't seem to sample much RF at 80 meters. I'm guessing that the designers were very focused on 27 MHz.
I quickly worked stations all over Europe, and even worked one station in Israel. I worked G4OEC in Somerset -- I immediately thought of Tim Walford, and asked OM OEC if he knew the wizard of the Somerset farm. Mac said his village was far from Tim's QTH.
It is nice to once again get familiar with the daily routine of the bands. 80 is hopping when I turn the rig on at 6 am local time. 40 seems to be active too. 20 opens a bit later, and I can hear stateside stations starting around noon local time. I really like hearing KZ1H up there in the high end of the 20 meter band -- I can hear him almost every day.
Check out the ad for the HW 8 in a 1978 catalog. This must be a non-U.S. catalog because the ad brags of the HW-8's ability to "work the States."
Not much astronomy this weekend -- Sabina and most of the rest of Italy fell under clouds on Sunday night. But I did catch a glimpse of Capella and the Kids.

SolderSmoke Podcast #120

http://www.soldersmoke.com

January 2, 2010
Olive harvest in Sabina, Christmas and New Years in Rome.
"What, no Klingon?"
How's my whistling SSSS problem?
DX on 20, HW8 QSO with KZ1H
Auroral flutter on US stations
W4OP: Homebrew Hero
Softrock progress
Linux woes
72 Part Challenge: "Stuck between best wishes and hugs and kisses!"
Chinese Hamsat in orbit, with CW telemetry
AA1TJ in CQ, and using diodes as audio amplifiers.
Stradavari and Julia Child:  inspirational late starters!
Billy's RC plane
QRSS:  telemetry next?
WSPR:  150K reports per day
New issue of Hot Iron
MAILBAG

Happy New Year! SolderCake!

This is just so good, I felt the urge to share it immediately with the SolderSmoke community. Thanks Tom, and Happy New Year to all!

Bill:

Happy New Year!
I am yet another listener who discovered your podcast by accident and am now hooked. I also thoroughly enjoyed your book. Both take me back to the days of scrounged parts and burned fingers, building balanced modulators and an FM stereo transmitter that earned me an invitation to leave a great southern university.

To celebrate the new year, rising sunspot numbers, and your 120th podcast, I offer the attached photo of a Solder Cake. It features 120 rolls of 60/40 rosin core solder -- several brands and gauges. The cake actually weighs 123 lbs. because the roll holding the soldering iron at the top is 4 lbs. It has zero calories, but definitely contains lead! It should be baked at less than 370 degrees, or the icing tends to run.

Why would anyone have 120 rolls of solder? I don't remember precisely, but rumor has it that ebay and alcohol were involved.

73, and a wonderful new year to you and your family.

Thomas Keister M.D. N5RTF

Chinese HAMSAT HO-68

PA3GUO put together this nice video. Check out the large footprint of this relatively high-orbit satellite.

Mark, K6HX, has a nice recording of SSB QSOs through the satellite: K6HX HO-68

On the air, out in the woods... Plus, olive news

We were out in the Sabine hills this week. Things are starting to settle down out there: The Cinghale are, well, mostly GONE (see earlier post), and the gunfire is starting to die down. And the olives have all been shaken from the trees. All was going well, but my wife was worried that with temperatures dropping, she might find me frozen out at my front porch operating position, so she secured indoor accomodations for me and the HW-8. Wow, what luxury! My CW is back to normal -- the shivering had been a real impediment. On Monday and Tuesday I was on 80, 40, and 20 with the Heathkit. I managed to work seven stations using a far-from-optimal end fed wire with my flea market tuner. It was fun to work Russian stations -- UA6HNU was running a homebrew rig. It reminded me of the good-old days in which most of the Russian hams were running HB gear. Then, just as we were getting ready to head back to Rome, there was some icing on the cake: Near the top of the 20 meter CW band I heard KZ1H (see earlier post) all the way from Boston.

Next week, a better antenna goes up.

I got some questions about the olive harvest. It seems that the trees around are place are about 200 years old -- mere kids, considering that there are olive trees in the world that are 2000+ years old.

As for the harvesting process, the shaking machine vibrates the tree for about 5 seconds. The workers have a collection tarp on the ground to catch the olives. Then they have machine that reels in the tarp.

Stagnosald! (Italian flux)

For some reason I like the packaging for this Italian soldering flux. Sort of takes you back to the days when soldering was soldering, if you know what I mean. Now (somewhat ironically) we are using this flux for SMT soldering. On the left you can see the PA stage of my slowly-coming-together SMT SDR LINUX Compu-radio. As you can probably tell, I am struggling to keep a positive attitude towards SMT and SDR. Lately, even Linux has been giving me trouble. The problem here is clearly with the operator, not the equipment. The Softrock SDR kit is really excellent. I'm sure I will eventually get it working, but I think there will be a lot of geezer-like complaining about all this new-fangled surface mount, software stuff. Please, bear with me.

Glowbug Christmas

My "Mate for the Mighty Midget" receiver (with 6U8s)

Some excellent Christmas verse from Brad, AA1IP:

The Glowbugs' Christmas
******************************

T'was the night before Christmas
And all through the shack
Not a heater was glowing
In all of the rack.

Sitting totally silent and quiet that night
The old HRO shed nary a light.
The Johnson exciter and its homebrew final
Felt cold as leftovers, or seat-cover vinyl,

I drowsed at my workbench feeling tired and weary,
The print in the Handbook looked fuzzy and smeary.
I thought, "I'll make coffee", and groaned to my feet
When I heard a loud clatter outside in the street.

What the--? I wondered and turned on the lights
And there I beheld a wondrous sight:
A battered old van heaped high with components
And a grizzled old ham with a bagful of doughnuts.

I noted his callsign-- can't recall it today--
But a patch on the side read "FMLA".
I opened the door and hollered "Come in!
The coffee pot's heating, and we'll sit down and chin!"

He spoke not a word but whistled in Morse
A "GE OM", and "By golly, I'm hoarse.
Too many contacts, and hot rosin smoke."
I nodded and poured him a mug of jamoke.

He emptied the doughnuts in a pile on a plate
And explained in a whistle, "I'm running real late.
I've new 6L6s and fine 211s, 6146s and good 'SN7s.
And 866s and 0B2s, type 45s and mil-spec 807s."

"For the regennie crowd, 201s by the score
And good ol' type 30s and 19s galore.
I haven't neglected the passive-parts run
There's lots of good iron by old Thordarson."

I nodded and smiled, suppressing a chortle
As he reached in his pack and left me a 304TL.
He whistled, "I'm leaving, the coffee was great,
But I'm overdue in the neighboring state."

"Keep everyone building the rigs of their choosing
Or we'll lose the bands that we're lazy in using.
Transistors or tubes-- any project is fine--
Just keep on constructing and sharing on line."

He leaped to his feet and waved a gloved hand
As he sprang for the door and his rusty old van.
I heard him exclaim as he drove away from me,
"Merry Christmas, you Glowbugs, and to all 73!"

****************************

(With apologies to Clement Clarke Moore, who surely would have
been a ham had radio existed in his time. Alas, all he had
to build with was words.)

For new readers: the FMLA (Five Meter Liberation Army) appeared in a
series of short stories written by Michael N. Hopkins, AB5L (sk). If you have never
read these, you're in for a fun evening!

For QRP fans: the numerical references in the poem are for classic
vacuum tubes, several of which operate at QRP levels (whether or not that was the
original builder's intention) and (mostly) within the amateur bands.

Christmas Greetings from Lunar Orbit

I always liked the last, very inclusive line in Colonel Borman's 1968 Christmas Eve message.

"Wired" magazine also made note of the important Christmas Eve radio message (1906) from Reginald Fessenden: the very first "phone" transmission. Fessenden himself played the violin ("Oh Holy Night").

Merry Christmas from Rome! 73 Bill

An appeal from SETI

Now here is a charity that Knack victims might see as a good cause --

I'm Dan Werthimer, the Chief Scientist of the SETI@home project.

You've been identified as a SETI@home volunteer, and I'd like to take this opportunity to thank you for your efforts. I also want to preview our plans for 2010, and ask for your financial support.

SETI@home is a unique global collaborative project that uses spare cycles on personal computers to help search for signals of extraterrestrial origin. Our vision to embark on this grand search is over ten years old, and continues to engage volunteers such as you from all over the world.

In order to improve SETI@home in 2010 and accomplish our scientific goals, we are reaching out to our volunteers for financial support, as this venture is largely funded by individual donations.

Our goals for 2010 include:

• Deploy and refine the Near-Time Persistency Checker (NTPCkr) which makes SETI@home more efficient in identifying candidate signals.
• Develop a web based system that will allow volunteers to view, as well as help in the ranking of, candidate signals.
• Expand the frequency coverage of our search beyond the current 2.5MHz band.
• Improve how we identify and reject Earth-generated radio frequency interference (RFI).

With your financial support we can accomplish all these goals in 2010. We would greatly appreciate any donation amount you can afford, and your gift is tax-deductible.

Thanks again for your time and consideration of SETI@home. Your effort and donations are what make this venture possible.

Sincerely,

Dan Werthimer
SETI@home Chief Scientist
Space Science Laboratory
University of California, Berkeley

PS: if you'd like to donate via check or wire transfer, please see instructions here.

A Report from South Africa

Hi Bill

Africa "field QRP station"
Thanks for another great episode of your experiences - I'm tuning in from Africa while on my vacation Each December I make the trek from San Diego to Cape Town.
Then, my Dad (zs1xd) and I take the family out to a remote
location - and setup a field station. Around the camp-fire, under the Milky Way and no rf-pollution is a great way to hunt some dx and spend vacation time. This year
we selected a cabin located in a beautiful mountainous region about 100 miles north of Cape Town. 2 wheel vehicle will get you there and "just in case" , we
also took a capable 4x4 with.
I posted some pics and QRP HF operating notes here: http://k6wh.blogspot.com/

"SMT"
I'm following your Softrock SMT construction comments with keen interest and am glad you're finding the challenge - well - "not so much of a challenge"
I think it's so great that you're encouraging hams to jump into SMT.
I chuckled at your comment about "desoldering smt's" - Try de-soldering the Si570 SMT chip. I had the good fortune of measuring messing up the
"measure 10 x then cut once" when soldering this IC on the rxtx kit. Well - we know a mistake will happen, and when it happens, murphy's law will ensure
that it involves the most sensitive and tricky smt component on the board - hi.

It's a real trick, due to the contacts being under the chip (no pins like the other smts)
Well - try de-soldering that piece. And of course one realizes the mistake, only once the last solder joint has dried. Determined to correct the mistake there and then,
at 9pm while busy with the kit, I rushed off to the nearest radio shack to get some de-solder wick. Took me about 1 hr of patience, and careful "wicking" to suck
up all the solder underneath the chip - one contact at a time, (each desolder attempt, hoping the chip pops loose) - no easy task. I don't know of another easy way
than lots of patience, and a good magnifying glass.

I agree there is no greater reward than "homebrew" and with the advances in SDR tech, we're surely living in a wonderful age.

Once you get the SDR on-air, I'm sure you'll be blown away by the reception quality - sensitivity and especially the almost non-existent noise-floor.
(I'm not sure which model you're building, but I think all of Tony's designs are utilize the same Tayloe detector design which is very quiet)

I still can't believe the performance I get with the Softrock's kit - It's now become an antenna measuring instrument - While having fun with PSK QSO's and WSPR.
Of course, with the SDR one can adjust the output (via soundcard drive) to basically uW levels.

As we know, at these levels, each little bit of antenna optimization helps, and SDR+WSPR/PSK has become my "far field antenna measurement tool" of choice.

WSPR from Africa
Not too many stations active on WSPR on the African continent - Now that I've setup my Dad on DSL, I assisted him in activating his WSPR station in
Cape Town (ZS1XD). His antenna is a 20m homebrew 2 el yagi. I'm pointing it north during the evenings to see if n2cqr pops up in the log. Nothing yet, but I'm sure
one of these days, you may just be surprised. Keep watching for the Africa report :)

thank you again for such a great entertaining and educational program ...
73 - best wishes to you and the family from the tip of Africa.
de deon (k6wh)/zs

Technical woes: Linux, WSPR, SSSSS

Help me, help me! I want to get WSPR running on Billy's Asus eeePC. I have Ubuntu Easy Peasy running off a thumb drive. And I have the WSPR sofware package in in the machine. But I can't get WSPR to run. I click on it, and the machine asks me if I want to run the program. Indeed I do! But nothing. Help me Linux heads! What am I doing wrong? I've tried running it from the terminal using the instructions in K1JT's excellent manual (see, I have read the manual!) but the computer informs me that I need superuser privileges. Now what?

Also looking for feedback on the SSSSSSS problem. Was it better in SolderSmoke 119?

Thanks!

New Chinese ham satellite in orbit

This makes me want to pull out the UHF gear!
http://www.camsat.cn/index.php?option=com_content&view=article&id=56&Itemid=67

Crossing the Pond to KZ1H

We were out the Sabine Hills this weekend and on Sunday afternoon I go on 20 CW with my trusty HW8. I made just one contact, but it was a GOOD one. KZ1H pulled me out of the noise and we had a very nice chat. My fist was not at its best, because it was COLD in those hills -- I'm arranging now to move the shack off the front porch and into the heated (I hope!) library.
Anyway, from the courteous way in which he persisted in copying my QRP signal, I knew that OM George, KZ1H, was a FB ham. Sure enough, when I plugged his call into Google this morning, I was taken to a site with the above picture of George in his younger days. Note the bug and the mill, and the homebrew transmitter. Here is George's story:

I grew up in Corona, Queens, NYC. I became interested in radio at the age of ten or so. My father bought an "Eilen" and I was introduced to Morse code. I met many hams around town (W2HDK, W2KAP, W2APT, W2KCD, W2JGV?). They were all very cordial and happy to show off their rigs.

In April of 1939 (age 14), I took my test at the FCC office at 641 Washington St, Downtown NYC and became W2MDE. My father bought me a Hammarlund Comet Pro (plug-in coils with shield cans). I built an oscillator/ transmitter using a type 59 tube.

I was invited to join the W2USA radio club at the 1939 NY World's Fair. W2KU was the Chief Op and my boss. We handled a lot of traffic for the fair visitors and kept the station on the air during the winter when the fair closed between summer sessions.

At 16, I graduated from high school and went to work for a large patent law office as a clerk. From there I went to work for Hazeltine in Little Neck, NY. I thought I might faint when I saw that my first check at Hazeltine was signed by Jack Binns, the radio operator who was the subject of the book "SOS to the Rescue".

At 17, I was made chief inspector of Hazeltine's first war-time production line and worked along side of Frank Hinners.

When I turned 18, Mr. Bailey of the ARRL became head of the Bureau of Scientific Research and Development in Washington, DC. He invited me to become a member of the Army Intelligence Service when I was drafted, which I accepted.

After the war, I attended the Cooper Union School of Art in NYC. I worked for PAA, Grace Lines, Andrea, Sperry Gyroscope, Varian Corp, and Global Systems. Much of my career has been in microwaves. I have been retired for 20 years and am still active on the bands. My present call is KZ1H.

I have been married to my wife Mildred for 53 years. We have three daughters, Jean, Janet and Diane.

Dale Parfitt, W4OP, Homebrew Hero

Yesterday, in my search for pictures of the Drake 2B, I came across VE3MPG's excellent interview with Dale Parfitt, W4OP. Dale and I crossed paths years ago: After I built my first version of Doug DeMaw's Barebones Superhet, I went out on the net and found a couple of kit versions of this receiver for sale. A few years later, I was working on one of them, and turned (as you do) to QRP-L for some advice. Dale came to the rescue and we started exchanging e-mails. After a while he told me that the version I was working on sounded familiar. Sure enough, he was the original builder! The story appears in SolderSmoke -- The Book.

Here is further evidence that Dale and I have similar tastes in receivers: Pictured above is his solid state version of the Drake 2-B. FB! I note that the dial scales are the same as the hollow-state version.

Here is the VE3MPG interview:
http://ve3mpg.blogspot.com/2008/10/interview-with-dale-parfitt-par.html

Mechanical Resonators

Mike, KC7IT, sent along this interesting article on the use of mechanical resonators in cell phones.
http://spectrum.ieee.org/telecom/wireless/radios-with-micromachined-resonators

Somehow, this made me think of my beloved Drake 2B. The 2B uses an L-C filter at 50 kHz, but -- sure enough -- a quick visit to the e-ham review section showed that Henry Radio had a vailable a mechanical filter kit -- some of the 2Bs out there are apparently fitted with this device.
Check out the e-ham Drake 2B love-fest: http://www.eham.net/reviews/detail/3868 All of it true!

And of course, this all provides an excuse to put up a picture of the Drake 2B.

A Fondness for Phasing

As the proud owner of a Hallicrafters HT-37, I have long had a fondness for phasing rigs. It took me a long time to figure out exactly how they manage to drop the carrier and one of the sidebands without the use of crystal filters. This was one of the technical understanding battles of my radio youth, and is detailed in SolderSmoke -- The Book. (See the upper part of the right column of this blog for details on how to get the book.)

I was reminded of all this by a link sent in by Jim, AB3CV. It is an EDN design note, and describes a simple modern SSB generator using two phasing networks, three IC's, and a handful of discrete components:
http://www.edn.com/contents/images/93099di.pdf