Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Wow, lots of wisdom in this video from Leo Fernekes. Great hints and kinks on prototyping with copper clad boards. I need a Dremel just so that I can make Leo's board cutter. And I can see that I need some of that liquid flux and isopropyl alcohol. Surf boards and headers! Who knew? Teflon coating for the wires -- gotta get it. Glad to see that Leo is also a fan of copper tape. His emphasis on the importance of stage-by-stage construction and testing is right on the mark. My only disagreement with Leo is about his use of steel wool. I've found that steel wool will inevitably cause little tiny "Murphy Whiskers" to float around your workbench. They will eventually settle onto the most inconvenient and damaging place on your board. So I have banished steel wool from my workshop. Those green, non-metallic Scotch Brite pads work just as well and don't cause shorts. Three cheers for Leo. He is based in Thailand. He has an interesting background and some really amazing projects and insights: http://www.luminati.aero/leofernekes
Great video, I watched it when he first posted it and just watched it again it is so good. For liquid flux for small projects I like the Kester flux pens like this https://www.amazon.com/dp/B004X4KOWS
Thanks for this Bill - I hadn't heard of Leo before. What an amazing teacher. His indestructible continuity checker is a marvel of simplicity - I am going to build one because it is cool!
Lots of really good stuff here but heed Bill's advice. Don't go near wire wool. A better alternative would be a small block of Garryson "Garryflex" abrasive blocks (240 grit). It's the least course. It cleans copper board wonderfully - and it lasts and lasts.
My favorite topic from this video was his advice on reducing "mental" or cognitive load by labeling connectors, etc. That theme is almost endlessly expandable.
It looks like Leo is just starting his channel. There's seven videos there, and I hope he makes a lot more. BTW, it looks like he was using the steel wool on a kitchen or bathroom counter rather than in his lab.--Todd K7TFC
An RF-Quiet LED 'Fluorescent' Bulb
-
I recently had the *fluorescent bulb* in one section of the under-cabinet
kitchen counter lighting fixture go dark. This wasn’t too surprising as...
BITX40 Rebuild Progress Report, MiscDotNews
-
In this post we’re going to catch up with what’s been going on over here at
MiscDotGeek and explain the gap in posts lately. We’ve been busy, and some
of...
SP-X, a pocket rig for the CW activator in a hurry!
-
I’ve long been interested in compact and fairly minimal SSB and CW rigs
with good performance. I’m not into bells, whistles or menus. Menus are for
restaur...
Instrument storage boxes updated
-
While getting some equipment off a shelf I knocked some thing down and they
landed on a nanoVNA, cracking the screen.
I think it is time to make some ...
Yet more new AVRs
-
In a previous blog I mentioned the new atmega4809 and AVR128DA parts. Well,
it seems I missed two other new families, the AVR128DB and AVR128DD series.
I’v...
Re-engineering my 1st “Shirt-pocket” transceiver
-
When the project of building a very small transceiver was accomplished 4
years ago, I still lacked lots of skills in setting up electronic circuits
using S...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasicknes...
Great video, I watched it when he first posted it and just watched it again it is so good.
ReplyDeleteFor liquid flux for small projects I like the Kester flux pens like this https://www.amazon.com/dp/B004X4KOWS
Thanks for this Bill - I hadn't heard of Leo before. What an amazing teacher. His indestructible continuity checker is a marvel of simplicity - I am going to build one because it is cool!
ReplyDeleteLots of really good stuff here but heed Bill's advice. Don't go near wire wool.
ReplyDeleteA better alternative would be a small block of Garryson "Garryflex" abrasive blocks (240 grit). It's the least course. It cleans copper board wonderfully - and it lasts and lasts.
72/3
Tony G4WIF
My favorite topic from this video was his advice on reducing "mental" or cognitive load by labeling connectors, etc. That theme is almost endlessly expandable.
ReplyDeleteIt looks like Leo is just starting his channel. There's seven videos there, and I hope he makes a lot more. BTW, it looks like he was using the steel wool on a kitchen or bathroom counter rather than in his lab.--Todd K7TFC
Thanks for sending me down a very happy rabbit hole for a morning. What a great set of videos Leo has on his blog.
ReplyDelete