GW4ZUA's "Let's Build Something" Receiver

The LBS project of Pete and Ben continues to inspire homebrewers all around the world.  Check out the video of GW4ZUA's version.  Peter GW4ZUA writes:

Hi Pete,

Thank you for your kind words,

I suppose it started with a knob and a pointer to know (guess) where you were on the band, probably most radio builders did the same, and some still do, but as long as it worked you were very satisfied, what a marvelous feeling when you switch on and those electronic components do their job and deliver the goods......amazing.

So time moves on you get better at building and technology gives you a hand, LCD displays, homebrew frequency counters,cheap components, wow now you Know where you are on the band.

Then I saw your rig with a colour display and DDS "I gotta get me one of these."

I watched most of your videos, Your "easy going, down to earth manner" made it look easy to do.
I love the internet, without it I'd probably still be using knobs and pointers, there are is a wealth of knowledge available to those lucky enough to have access. I also love email, as you can now contact people who are willing to share their projects and give advice.

So the LBS well it certainly works, so few parts but they are all eager to please, with the display (did I mention the display) it is a project you can be proud of.

A big thank you to you and Ben for the project,

I don't know if it will ever go in a box as I just love to look at it and I'm amazed at what comes out of the speaker.

Regards to you all..........
73's for now.  ...........Peter (GW4ZUA)
------------------------

As is well known, I'm more of a knob and pointer guy myself, but I understand the attractions and advantages of the glowing numerals.  And I definitely sympathize with Peter's comment about the beauty of an in-boxed rig.

Listen to Keith Ranger G0KJK on "QSO Today"

http://www.qsotoday.com/podcasts/g0kjk

Wow Eric,

I just listened to all of the Keith Ranger interview and was struck by the eerie parallels between YOUR 24 September podcast and OUR 24 September SolderSmoke podcast:

-- Both shows discussed the involvement of Anglican clergy in the hobby.

-- Both discussed the joys of simple QRP gear.

-- George Dobbs G3RJV came up in both.

-- BOTH featured discussion of the BD139 transistor (!!!)

-- Both discussed the use of ceramic resonators in ham circuits.

Great minds think alike!

I really enjoyed your interview with Keith. I have enjoyed reading in SPRAT about his projects -- years ago I built his MB4 receiver. I listened while I worked on my homebrew receiver. It was the ideal accompaniment. I also like the stickers on his transmitter.

Please pass this on to Keith if you can.
Thanks and 73 Bill
---------------------

I also liked Keith's comments on the joys and perils of amateur electronic engineering. 

Video: Sweeping a Filter with a FeelTech Signal Generator and a Rigol Oscilloscope

This short video shows how I used my new FeelTech Signal Generator (90 bucks shipped from China) and my trusty Rigol oscilloscope to display the passband of the filter in my Armand HROish receiver.  Feedback on this test procedure would be appreciated.

K1RID's 6L6 CW Transmitter from QST: "Barracks Bag VFO"

A new old thermatron device is coming to life on the kitchen table of K1RID.  Don't spill the coffee on that thing Ed.

Blowing the Dust Off of KW4KD's Homebrew Station from the 1970s

KW4KD CW TRANSMITTER

I got on 40 meter SSB over the weekend and spoke to Jim KW4KD.   He was on a modern commercial rig, but then he told me he had some homebrew gear on his shelf...  Wow, it is magnificent.  A complete CW station (with homebrew keyer) AND an SSB rig. I immediately launched a campaign to get Jim to fire that gear up and to provide opportunities for more HB2HB contacts.   Here is his description of the equipment:

Hi Bill,

It was a blast to get to chat with you too.

Just listening to the audio on this end, I can tell you’ve put a lot of time and effort into getting what you have there up and running.

Never once touched the dial on this end. So your radio gets a A+ for stability too.

Read your Bio on QRZ and sounds like you’ve been a few places, and seen a few things, and that unto itself would make a great contact . But for me, the fact that you are out there building, and I ‘m getting to hear the fruits of your efforts, is ham radio at its best.

 

Attached are pictures of the gear that made up my station back in the 70’s.

FWIW: At that time my call was WB4YQC.

(But for the record, these shots were taken today.)

In those days I had two setups (Both on 40 mtrs).

A CW station, using separate Xmtr & Rcvr, And a SSB xcvr.

By themselves the CW xmtr ran 8 to 10 watts, and the SSB unit probably hit 5 Watts peak (on a good day).

Like you, I had a separate linear. But in my case I used a pair of 6DQ5’s (TV Sweep tubes) that would run about 180 watts input, (Nothing Solid State, that I could afford, could make that kind of power back in then). The linear is still here, but stashed away in a closet somewhere, so not shown in today’s set of pictures.

As an Add-On for the SSB unit, I built a Frequency Counter, and used it as a digital dial.

The counter is unique in that it supports two inputs (one for the VFO, and the other for the Xtal BFO). In the 2 input mode, the counter is an UP/Down counter.

The Xcvr’s BFO runs at 9Mhz, while the VFO runs at ~2Mhz. So the counter counts up on one pass, and then down on the 2nd. At the end of the 2nd pass, it updates the Display with the final tally. (i.e, the effective TX/RX freq)

The cases for the Xmtr & Xcvr were designed by me, but were built by a friend who had access to a metal brake. Internally none of the units are especially pretty, as the were always works in progress.

I’ll have to dust off the linear. Its been at least 40 yrs since its seen AC.. Not sure what kind of shape the electrolytics are in.

Probably need to apply power slowly. I’ll see if I can round up an Autotransformer.

As far as posting on your blog, if you think it will encourage others, I’d be flattered if you did;

However, before anybody asks, (assuming that they might) there’re no schematics. Everything was built from sketches made on envelopes and napkins, which have long since disappeared. And even if they did exist, not sure today that you’d be able to find some of the ICs & transistors that the units use.

Again, it was my pleasure to catch you on the band today, & look forward to getting to hear you again.

73  Jim (KW4KD)

KW4KD CW TRANSMITTER WITH HB KEYER

40 Meter CW receiver on Left

40 meter SSB transceiver with freq counter

Video of Armand HROish Receiver

SolderSmoke Podcast #190: Pilgrims, Junkbox rigs, BANDSWEEP, Matching xformers, On the Air with HB, MAILBAG

SolderSmoke Podcast #190 is available:

http://soldersmoke.com/soldersmoke190.mp3

Pilgrims' Progress:  Inspiring words from G3RJV

BENCH REPORTS on JUNKBOX RIGS:

Pete describes his beautiful 40 meter blue transceiver (video above)

Bill describes his "Armand HROish" receiver

BANDSWEEP!

Bill needs small (yellow slug) 455 kc transformers.

We need a good user-friendly 40673 SPICE model.

SEND US YOUR BENCH REPORTS!

The BD139 transistor

Ferrite Core Matching Transformers

QSO Reports:  Getting on the air with HB rigs

Bill's new FeelTech Signal Generator

MAILBAG

QRPp Back Issues (and some new ones too!)

Here's an index: 

http://www.k7qo.net/qrpp_toc_de_k7qo.pdf

And here are lot of the back issues:

http://www.ncqrpp.org/

And I see there are August and September 2016 editions available in the Files section (KI6DS)  of the qrp-tech Yahoo group.  Did I see articles there from Steve "Snort Rosin" Smith?

My New Chinese Signal Generator

More amazing low-cost test gear from China.  Elisa gave me this device on the occasion of my completing another solar orbit.  Amazing capability for less than $90.  The video above gives you a good sense of what this thing can do.

I have already had success with the freq generator function.  The frequency counter also works great.  The sweep function looks very useful for filter checking.  And the ability to generate square waves at different phase relationships will be very useful in phasing receiver and transmitter projects.  

This little box should help me eliminate a lot of clutter on the work bench.  And it looks good next to the Rigol 'scope.  

Mine came from Amazon:

https://www.amazon.com/gp/product/B01A8S4TZK/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1

They come with a variety of different brand names:  I ordered a Jinwen but got a FeelTech.  They are obviously the same device.

Be sure to begin your Amazon shopping on the Amazon search link on the SolderSmoke blog (upper right).

QRP Wisdom from George Dobbs, G3RJV

This video makes me want to destroy my amplifier...

Alan Wolke Talks 'scopes on "The Workbench" Podcast

George KJ6VU is a long-time supporter of the SolderSmoke podcast.  He has recently teamed up with another ham and launched a podcast called "The Workbench."  This morning I listened to Part I of their interview with the legendary Alan Wolke W2AEW.   It was great.  As I was listening to Alan I was soldering together a crystal filter for my new receiver, and using my RIGOL 'scope to check the results.  

I liked Alan's description of how they made images of 'scope patterns in the days before the advent of Digital Storage Scopes (Polaroid!).  I also liked Alan's scorn for those who use the "Auto" switch on the 'scopes.  The host's reaction to Alan's description of a $300,000 Tektronix 'scope was also fun: "For that price I want to be able to drive a car into it and put a swing set behind it!"  Indeed.

Recommended listening:   
http://hamradio360.com/index.php/2016/08/30/ham-radio-workbench-5-oscilloscopes-part-1/

Oz JOO : An Australian Mighty Mite with 3D Printing

Hi Bill & Pete,

I have the JOO - joy of oscillation! The transistor is a 2N3053 with a clip on heat sink, but I don't think that I really need it. Output power +22dBm or 160mW. When I tested it on a Comms test set  at work, I found that the harmonics were about 12dB to 15dB down and I stopped looking at the 10th harmonic. Not good.

Fitting the 80m low pass filter (salvaged from another project) brought the harmonics more than 50dB down.

The coil former is a 31mm diameter and 3D printed by one of the guys at work. The material is PET - the material they make soft drink bottles from. After we printed it, I put it in a microwave oven with a glass of water. 30 seconds and the water got warm and the coil former stayed cool.

I haven't had a contact yet, but maybe in the next few weeks.

The next project is an 80m CW transmitter based upon the Goodfeller transmitter from QST 1946. It requires a inductor in the pi coupler, 1.5 inch diameter, 32 turns at 20 tip; but where to get one of those these days - wind your own.

I got the guy at work to also 3D print me a coil former with a spiral thread around the outside with a 20tpi pitch for the wire to lay in. Some hot glue and the coil is ready.

Now that I have finished all 189 episodes and two specials, my days are empty. Please make some more.

73 de Peter VK2EMU

Hi Peter (great name BTW),

 

Congratulations –really liked your build – top drawer! 3D printer access WOW – now if I could only get my 3rd son (Mechanical Engineer) to build me one of those machines.

 

The 3D made coil form is perfect for a VFO and follows the principles set down by Doug DeMaw W1FB (SK) about keeping the coil supported at both ends and away from metal. Bill needs a coil like that to mate with his HRO dial mechanism –and follows something old (dial) something new (coil).

 

73’s

Pete N6QW