Hardware Hacking by Nicolas Collins

David Cowhig WA1LBP and I are the only two Foreign Service officers to have also been 73 Magazine "Hambassadors" (impressive, right?).   David was covering Okinawa for 73 (and for Uncle Sam!) while I was doing the same in the Dominican Republic.  

Today David sent me a link to the book "Hardware Hacking" by Nicolas Collins:   http://www.nicolascollins.com/texts/originalhackingmanual.pdf

It is not exactly about ham radio, but there is a lot of electronic wisdom in Mr. Collins' book.  You folks will like it.  I especially liked the hand-drawn schematics -- this adds soul to the book. 

Nicolas Collins is an interesting fellow.  He is Profesor, Department of Sound, The School of the Art Institute of Chicago.
https://en.wikipedia.org/wiki/Nicolas_Collins

http://www.nicolascollins.com/read.htm
  

Ed Walker of "The Big Broadcast" at WAMU-FM

Ed Walker, the long-time host of "The Big Broadcast" on WAMU-FM in Washington DC passed away on Sunday night, a few hours after his final broadcast.  I was a regular listener. 

He obviously had an abiding love for radio.  His obituary in the Washington Post notes:

Born blind, Mr. Walker grew up with radio as his constant companion from an early age. By age 8, he was operating a low-power radio transmitter in his family’s basement, beaming music to his neighbors’ houses down the block. He would go on to spend almost all of his adult life involved in the medium in some way, all of it on stations in Washington.

Wow, sounds like he had the Knack.  I wonder if he ever had a ham radio license?

https://www.washingtonpost.com/entertainment/ed-walker-wamu-personality-who-burnished-radios-golden-age-dies-at-83/2015/10/26/373c905c-7be2-11e5-b575-d8dcfedb4ea1_story.html

HB2HB! AC9JQ -- N3FJZ on 40 with Homebrew Rigs

On Saturday October 24,  Dean AC9JQ (Indiana)  and Rick N3FJZ (Maryland) made contact on 40 meter SSB using Si5351/TIA BITX rigs.  FB!:

Bill:

Dean and I made contact.  We both were in and out most of the time, but conditions seemed to improve towards the end where I could understand Dean about 90%.  Using the RST "by the book", I would say he was a 33, 3 =(readable with some difficulty), and signal strength was 3=(weak), and based on what Dean was reporting, my signal back to him was the same - 33.

73 to you both.

Rick - N3FJZ.

HB2HB! AC9JQ and N2CQR Make Contact on 40 with Homebrew Rigs on Both Sides (with help from N3FJZ/HB)

This weekend brought another HB2HB (Homebrew to Homebrew) contact.   We have been following with interest the 40 meter transceiver project of Dean, AC9JQ.  Above you can watch a video of Dean's rig in action before it went into the box.  Earlier this month Dean achieved a remarkable "Double First" when he made his very first amateur radio contact.  He was using his homebrew rig to do it.  So his first contact was also his first homebrew contact.   FB. More info on Dean's rig and homebrew exploits can be seen here:
http://soldersmoke.blogspot.com/search?q=ac9jq 

This week Dean got a decent 40 meter dipole up in the air.  We arranged (via e-mail) to meet on 40 on Friday evening.  We made contact, but conditions weren't great.  We tried again several times on Saturday, looking for open spots amidst the madness of the CQ WW DX contest.  Rick N3FJZ joined us and also tried to make contact with Dean, but had no luck either.  Daytime conditions didn't allow for a good contact between Indiana and the Washington/Baltimore area where Rick and I are located. 

Finally, last night after family obligations at both ends settled down, Dean and I found a relatively open frequency on 40 and made a good contact.  A short snippet of it can be heard by clicking on the link below.   Keep in mind that Dean was running about 2 watts to a dipole on 40 at night.   

http://soldersmoke.com/HB2HBAC9JQ.mp3

Thanks Dean!  Thanks Rick!

German Thermatron Homebrew

Michael DF2OK has been melting solder in Germany.  Above is a short video of the first sounds made by an AC-1 replica he built.   Michael notes:  "Yeah, I love these old style radios. You can see nearly everything. :-)  BTW: All without Arduino and other black boxes and chips!"
FB Michael.

During the AC-1 build Michael struggled with a bad tube.  His discovery and resolution of the problem is presented in this video (understandable even to those who don't speak German):



Finally, here is a nice video of Michael's 40 meter regen receiver. Anyone who has built or worked with a regen will understand perfectly this video.  Watch Michael tune in stations while adjusting the regeneration.  Note his demonstration of the lack of hand capacitance. FB Michael!  Thanks!