The IRF510: The Car Turn-Signal Blinkers Used As RF Amplifiers

 

I have many of these MOSFETS in my rigs.  Yesterday I came across Paul Harden NA5N's excellent Handiman's Guide series.  It had this really wonderful paragraph about the history of this part.  I-R is the International Rectifier company.  

https://hyse.org/pdf/www.aoc.nrao.edu/~pharden/hobby/_ClassDEF1.pdf

https://hyse.org/pdf/www.aoc.nrao.edu/~pharden/hobby/Hobby.shtml

Helge LA6NCA Builds a Double Sideband Thermatron Transmitter

Helge is an amazing homebrewer. Check out the shack.  Note the R-390 and the Tek 'scope.  Watch how Helge designs his rig.  Watch him check the 3-D printed coil and the variable caps for resonance.  Most of all, watch his happiness when the new transmitter works.  I just wish he would have showed us some OM complaining that he was on the "wrong" sideband. FB Helge!  Thanks. 

W2UO's Michigan Mighty Mite -- Made a Contact!

Hi Bill,

I found SolderSmoke about six months ago, and it's quickly become one of my favorite podcasts.

I've been a ham since I was 11, but never tried my hand at homebrewing anything.  I've always heard how hard it would be, and how a project like a SSB transmitter is just too far out of reach.

You and Pete are inspirational, so I set out to build a simple starter project, the venerable Michigan Mighty Mite.  However not just any mighty mite, a usable one, not just a proof of concept.  One intended to sit on a desk and look good doing it.  Complete with built in low pass filter, tx/rx switching, and an internal dummy load.

I don't know if I accomplished all that, but I did make a contact on it this afternoon.  Next logical step I suppose will be to build a DC receiver to sit next to it.

Please find pictures attached, I've learned a lot about what not to do with project, so criticism is welcome.

73!
-Jim W2UO

My response: 

Wow Jim, that is really wonderful.  Congratulations on the build.   I've built many of them, but I don't think I ever made a contact with a MMM.  FB.  

It looks great to me!   Indeed, you should do a Direct Conversion receiver next.    Maybe do a receiver for 40, then do a version of the MMM for that same band.  Then you could 

make a completely homebrew QSO.   I did this recently on 40:  https://soldersmoke.blogspot.com/2023/02/first-qso-with-high-school-receiver-100.html    It was a real hoot!  

Our friend Dean also built a MMM as his first project:  https://soldersmoke.blogspot.com/2019/12/dean-kk4das-puts-michigan-mighty-mite.html

Please keep us posted on your progress. 

Again, congratulations!   73  Bill N2CQR

Technology and Methods from Wes Hayward W7ZOI

Great stuff.  Lots of wonderful articles filled with wisdom to ponder. 

 http://w7zoi.net/oldtech/ponder.html

Thanks to Tony G4WIF for spotting this gem and alerting us.  And thanks to Wes for all of this.  

Nice Ham Radio Documentary from Montana

Thanks to Thomas K4SWL for alerting us to this.  The 25 minute film is well-done, using modern film techniques and editing. It is a bit appliance oriented (but so is ham radio, unfortunately).  The EME stuff is interesting.  And I think the film captures the friendly, fun spirit of ham radio.