Adam N0ZIB's FB Station (and UGLY Michigan Mighty Mite)

Bill and Pete, 

Thanks for the work you put into your podcast. I’ve been listening to it on my commute and while at work (I’m a welder/fabricator). Fantastic content.  Keep up the great work.  

All your talk about Farhan and the Ubitx convinced me to order one.  I welded an aluminum case for it and upgraded to the Nextion 3.5” screen. Also added a tuning knob from a Heathkit SB-401.  So far I’m really enjoying this rig. Plan to add an audio amp (to drive a larger speaker) and a CW filter to it this weekend.  In the station picture I sent I also show my paddles made from a hacksaw blade and stainless steel hardware. It’ll send 25 WPM before it gets a little sloppy.  My QCX 40 is also pictured.  I have a commercial rig too but find I’m not using it very often. 

Plan to start building the simpleceiver soon and maybe a bitx 17 too. Your podcast played a big part in convincing me to pick up a soldering iron again.  You guys are awesome.  Keep it up.  

73’s

Adam

N0ZIB

(Pete noticed that the main tuning knob on Adam's uBITX was NOT from Heathkit but was instead from a Collins KWM-2 or 32S3.  He advised Adam that the knob would sell quickly on e-bay.  It did, and will finance additional N0ZIB homebrew projects.  We are thinking of adding these knobs to our SolderSmoke Retirement Fund Portfolio.)   

Adam continues: 

I was listening to your older podcasts and heard several discussions about the Michigan Mighty Mite.  So this jumbled up mess probably doesn’t look like much but I built one. I need to order a 40 meter crystal and actually build it again on a board(with the coil rewound for 40) but my “proof of concept” build was a success. Using a variable cap from a Hallicrafters S20-R and the crystal holder from a Heathkit.  

Swedish Michigan Mighty Mite Beacon Project

sTef DL1FDF/VY1QRP alerted us to this multi-band Michigan Mighty Mite beacon project out of Sweden. They certainly have some fine looking rigs! 

Check out the reports:
http://www.radiorud.se/fyren.php

Bill's Re-Born 1993 ColorBurst Michigan Mighty Mite

So far we've sent out 9 of these color burst 3.579 MHz crystals.   It occurred to me that I should make sure these particular rocks work with the Michigan Mighty Mite design we've been advocating.  So today -- still in something of a turkey-induced haze --  I pulled out the surviving remnants of the MMM that I built back in 1993.  That one had been for 40, so I rewound the coil for 80 using the data from this MMM site: http://www.qsl.net/wb5ude/kc6wdk/transmitter.html   

I was hoping that this rig might oscillate even without the variable capacitor, but mine did not.  Once the cap was placed in the circuit, the oscillations began.  It sounds pretty good on my Drake 2B. 

I have not yet wound the secondary (antenna) coil but (as I suspected) the oscillator works fine without it. 

So, no excuses folks.  These cheap junk box crystals work.  Time to build one of these things and join the ranks of hams who have homebrewed a transmitter (and, of course, The ColorBurst Liberation Army).   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Pete Builds a Michigan Mighty Mite

We have been distributing quite a few 3.579 MHz crystals, but until today we hadn't seen a single new Michigan Mighty Mite.   I commented on this in the last podcast.  Pete came to the rescue and built one: 

Hi Bill,

     The MMM was built – took me a long time (about 30 Minutes so it was kind of slapped together). The most time was consumed drawing squares on the sheet metal. I used a pill bottle cut down for the coil.

     Used a piece of Home Depot sheet metal for the based. I highly recommend a .01 Ufd from the 27 Ohm to ground –key clicks are awful.

     BTW the circuit can be modified so that the tuning cap is soldered to one side of the coil and the other side to ground –essentially the tank tuning cap is in series with the 0.05 bypass cap and is effectively across the coil. Tribal Knowledge

    The CLA lives on!

 Pete

VIVA EL EJERCITO DE LA LIBERACION DEL COLORBURST! VIVA EL CLA! 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Harv's Idaho Mighty Mite

Greetings Bill, Pete,
While between tasks, I put a little work in on the LPF for the Michigan Mighty Mite.
I will soon be ready to light this thing up. I fit everything on a copper board 3.5 X 5.
I even put some non-skid rubber feet and fashioned the tank circuit for 40 Meters.
The Color Burst frequency was a bit too low for a practical antenna on this small city lot so, I did the next best thing.
It's like reliving those teen years, routing through boxes of misc parts and soldering them in place one at a time.
The thrill involved kind of brings those days back to future.

I wanting to construct a regen-receiver but, the pile in front of the solder station is urging me to continue on with the Minima.

I love the variety of Mighty Mites that have been built thus far. Each one is like a painting where the artist has left their signature on their work.

Keep building, Keep having fun and Keep learning. 

73's

Harv -=WA3EIB=-
Eastern Idaho

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Another M^3: The Michigan Micro Mote

Move over Michigan Mighty Mite and Mate for the Mighty Midget.   There's a new M^3 in town.  And it is SMALL. 

Hack-A-Day had an article on this today, and while it seems only tenuously connected to ham radio, I found it intriguing.  

Check it out.  Who knows, someday people may be operating in "dust mode":  

https://hackaday.com/2021/10/04/snails-sensors-and-smart-dust-the-michigan-micro-mote/#more-498450

KC2THY's Mighty Mite - A Thing of Beauty

Bill,

I have been a listener of the Soldersmoke Podcasts for several years now and I have worked my way through most of the back episodes of the podcast. It is terrific production and has taught me so much about radio electronics. I have also read all of your books. Thanks for what you do for this hobby.

Attached is a photo of my recently completed Michigan Mighty Mite.  The FFT function in my scope confirms a good clean signal and it sounds great when I listen to it on another radio. I am sure that the photo depicts one of the worst looking MMMs to date. I built it on a solderless breadboard as I have never built anything using Manhattan or ugly construction techniques. It was a great introduction to very basic homebrew electronics.

Thanks again,

John Stockman, KC2THY

Morristown, NJ

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

An Enthusiastic Recruit for the Color-Burst Liberation Army



Hey Bill and Pete

Man, I am loving the podcast! 

It is absolutely what I need, and what ham radio needs today!!!

I am at about episode 168 trying to catch up.

I would really like to build a Mighty Mite.

In fact, going on the record,  

I AM GOING TO BUILD THE MICHIGAN MIGHTY MITE.

If you have any crystals left could you please send me one.

I've got a 9 year old boy that's home schooled and I want to make this electronics hobby a stepping stone to a higher learning experience. 

I got in to ham radio to learn electronics and somewhere along the line I just learned how to send and receive CW and how to pass multiple choice question tests. Somehow along the way I lost my love of radio. I still have a nice modern day rig, but it has no "soul". I heard that comment in one of your episodes and it really rang a bell with me and when it rang I said,

 "Oooh, that's Awesome! "

I want a radio experience with soul!

I think that maybe why folks still use CW. It's a mode with soul. I know you champion SSB, but home brewing a CW transmitter and receiver has got to be a truly soulful experience.  And its one I intend to have as one of my own.

 I too want to enjoy the "Joy of Oscillation ".

With you guys inspiring me, I am sure this will be a wonderful adventure. 

THANK YOU! THANK YOU! THANK YOU!

For your guidance and inspiring work in the field of homebrew radio.

Sincerely,

Paul Hodges

KA5WPL 

P.S.

The chemistry of you 2 guys on the show REALLY remind me of Click and Clack. You guys really work well together! 

PLEASE DON'T STOP!

73

---------------------

Paul:  Consider yourself inducted.   There are, however, some conditions:

1) You MUST build the MMM and make it oscillate (thus experiencing the JoO).

2) You MUST send a picture or (better) a video of your MMM in operation.

3) You have to give me permission to put your e-mail (below) on the SS blog.

4) You have to send me your address so I can issue you a for-real SS 3.579 crystal (with mojo).

Deal?  73  Bill

-----------------

Deal,

I'll do my best to get video, at the very least I'll get pics.

As for making it actually oscillate, well if the "radio gods" let it be then I'll be having some good vibrations going on in the shack. Hope to have it going before first snow...of 2015...

Also, being inspired as I am, I made a CW contact with 5 watts since I emailed you last. 

Thanks for helping me get the fun and excitement and the adventure back in to ham radio!

Sincerely,

Ka5wpl

P.S.

Please send a card if you have one with the crystal. 

PPS  Also why not initial it if you've got a small enough pen :)

73

----------

Paul's Knack Story is here: http://www.qsl.net/ka5wpl/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

W2DLH's 20 meter Mighty Mite

N2CQR & N6QW,

 

I ran across a reference to the SolderSmoke book and read through it very quickly.  Through the book, I discovered the SolderSmoke podcast and have been enjoying every minute!

 

I just want to thank the two of you for the inspiration and new motivation I’ve found in a hobby I’ve loved for 25 years!  I’ve never tried homebrewing anything but that’s about to change.

 

It took me a while but we have oscillations on or about 14.060 MHz!

http://youtu.be/AUms45rwm84

I adjusted the circuit to use resistor divider biasing of the 2N2219 and changes to the biasing and coil to accommodate the 20m crystal. Also the only cap I had that worked was a 10-50pF trimmer. Aside from my placing the crystal in the wrong point in the circuit because I wasn't paying attention, this Michigan Mighty Mite needed minimal tweeting. The antenna is a 50 ohm resistor which the KX3 heard very well with its attenuator in line. 

 

Now my problem is that I listen to SolderSmoke in the car and it's bad form to take notes and drive at the same time. Also, I find myself wanting to experiment with all of the ideas from the podcast at once...  If I build your LBS in modules, Pete, then I can experiment later and swap circuits to my hearts content.

 

One question for now...where is a good source of plentiful, inexpensive crystals?

 

Thanks again, guys!

 

Darryl Hambly, W2DLH

- - - - - - - -

Grid DM78pu

G-QRP 15014
QRP ARCI 15138
SKCC 10990
- - - - - - - -http://www.qrz.com/db/W2DLH

Ben's Mighty Mite -- IT IS ALIVE!

Ben KD9JNQ is the first of the Colorburst Liberation Army (CLA) recruits to get his Michigan Mighty Mite to oscillate.  So he has been promoted to Colonel. 

Ben writes: 

Bill and Pete, thanks again for the encouragement!

EL CLA UNIDO JAMAS SERA VENCIDO

Ben
KD9JNQ


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

A Quarantine Mighty Mite

'Tis a thing of beauty. 

Bill/Pete:

    I just decided here over the COVID period to head back to basics here and build a Michigan Mighty Mite with a Color burst crystal I had here. And wouldn't you know it, it works!  Here's a couple of pictures, it's not pretty at all. Needs to be mounted on something. 

Don KC9ZMY

Colchester Mighty Mite

GM Bill,

So, I got round to making my Michigan Mighty Mite!

The crystal arrived almost safe and sound, thanks to the USPS’ mail crusher. Perhaps they think that because email and packets can be compressed they can do the same with parcels? (the photo really doesn’t do it justice - the orange area is a large dent…):

No 2 son, Cameron (12), got involved - The extremely neat tank coil is his handywork :

And so to the video: Not only does it oscillate on the correct frequency as shown here, it also has the added bonuses of oscillating around 21.5Mhz (which is the number my frequency counter gives - which caused a great deal of head-scratching on first smoke), and muting the FM broadcast receiver on 96.1MHz on the shelf 3 feet away!. The dummy load is the 3w metal film resistor suspended in mid air.

You might notice more resistors in the circuit itself than the diagram calls for. I chose to have 2 x  20K resistors in parallel to produce a single 10K resistance that could handle .6W. And the poor old 27R .3W resistor got really hot and discoloured before rapidly increasing its resistance ( !! ), so I used 4 (2 serial pairs in parallel) to handle the current. They still get hot, but survive. And the 2N2222a has a bulldog clip heatsink.

Please excuse the uncorrected error at the end of the CQ call!!

This is the second transmitter I have ever built - the other one is a 30m Hans Summers QRSS kit which you also get the ‘blame’ for :-)

Thank-you, Bill. Keep up the good work.

73’s de G7TAT, Colchester, England.

Snort Rosin's Mighty Mite: The Super Duper X Spy Transmitter

Hi Bill,

Attached is a picture of the remains of my transmitter, "The Super Duper X Spy Transmitter". My little rig didn't sit around; it made QSOs the day it was finished, 41 years ago. Since then it has bounced around in various junk boxes and had some parts robbed for other projects but thankfully it's still mostly intact.

I constructed it based upon the original article in Ed Noll's book, "Solid State QRP Projects", pg. 51, Project 17, "10 160 All-Band Two Watter". That transmitter was later to become known as the Michigan Mighty Mite.

My MMM (or SDXST if you will), features a built-in relative power detector, a microswitch key (upper right-hand corner), room for an internal 9 Volt battery and a jack for external power. The jacks are each different; a BNC for the antenna, a 3.5 mm closed-circuit jack for the key, a 2.5 mm for the relative output meter and a phono jack for the external power. My notes say that I added a .1 uF Emitter bypass and that it increased the power output by 50%. I also used a toroid for the output tank instead of the 1-3/4" coil form called for in the article. Use of the "Sucrets" box was not my idea; I got it from one of the ham mag's. of the day, probably 73.

Your coverage of those little rigs has motivated me to restore mine and make some QSOs for old times sake. With, of course, the proper output filter :-). I'll send a picture of the 'guts' when it's finished.

73.......Steve Smith WB6TNL
-------------------------------
Thanks Steve. Great stuff. But... WHERE'S THE OUTPUT FILTER?

Another Mighty Mite Success Story!

Bill:

I started listening to Solder Smoke this winter, and I'm now up to episode 81. Since I'm new to homebrewing, I wanted to say that I enjoy the discussion of good projects to start on for homebrewing equipment, particularly the discussion of the Michigan Mighty Mite, which I understand was your first HB TX project. After hearing you mention the transmitter on the show, I looked it up on the Internet and found the schematic. A few hours later and I was on the air. My first contact with it was with KB1TSG, Jim in Randolph VT, receiving a signal report of 449. From my QTH in Monroe, ME that's a distance of 186.5 mi ( 300 km) as the crow flies.
I've learned a lot listening to Solder Smoke over the past two months and listen to it while in the car, at work, and while walking my dog on the back roads of Maine. Thanks for such a great educational and entertaining show.

73,
Neil

--
Neil Caudill
KB1UAL

Pete's Michigan Mighty Mite Manhattan MePad Noodle

New recruits have been signing up for the Color Burst Liberation Army.   We have been sending out many more 3.579 MHz crystals. Pete Juliano was doing some noodling and came up with this plan for Manhattan pads or Me(Maine)Pads.   All you need is some copper clad board, a pair of Home Depot tin shears and some super glue. Cut out the pads, glue them down, add components and get the Mighty Mite percolating.  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

VA2NM's Michigan Mighty Mite (with Tuna Tin LPF!) (video)

Bill,

  Here is my contribution... After managing to somehow get my hand wound transformer to melt a pill container, I used my Dad's hand made, circa 1950 transformer and got it working on a 1.4 MHz xtal and also on 3.58 MHz with a colour burst xtal.  A re wound coil on the remaining unmelted pill container worked on 40 meters. I succeeded in getting my Mighty Mite working on three bands.  My father would have been pleased, as this was kept aside all this time and now has been put to use. He had built the coil while working part time in post World War II England at the GEC labs in U.K.

Thanks for the motivation! I'm going to move forward and clean up the 80 meter signal and see how far it goes on the reverse beacon website.

The coil form was about 80 turns on a 1 inch diameter with a 20 turn secondary that I used for the center tap portion by joining both bottom ends.  Then I wound an 10 trim secondary, loaded up with a 50 ohm resistor to tune up (capacitor fully opened up) on 3.58 MHz in the video, and the audio coming from my receiver tuned to the 3.58 MHz signal.

Regards,
Nigel Maund

Waco Mighty Mite Mojo!

Eric:  Wow, great news from Waco.  JOO indeed!  And I really liked the WAY you did it, liberating crystals and wire from old TVs.   That definitely adds mojo to the Waco M^3.  Bill

 

Hello Bill,

  My name is Eric Melling KD0OXY. I have, as of tonight, officially passed selection for the CLA. My Michigan Mighty Mite began oscillating tonight between 1830 and 1900 CST and I am ecstatic about it! My foray into home brewing began mid-2011 when I obtained my general class ham license (I took Technician and General at the same time taking advice from my late grandfather). The first radio I ever purchased was the Pixie II kit and boy was that frustrating. I meticulously assembled the kit and worked very hard to stuff the transceiver, volume control, options to use the on-board key or a straight key, and maybe an on-board speaker or phones.  But, to my chagrin, I was treated to the sweet wafting smell of the magic smoke long before ever getting on the air. I eventually did get on the air with my aforementioned grandfather's VHF/UHF HT and until recently, this has been the extent of my Ham career.

 

  But on the advent of my starting an MA in applied linguistics at a school in Dallas (hour and a half from home in Waco) and the rekindling of my electronics knack occurring near- simultaneously with my discovery of the SolderSmoke Podcast, I decided to give it another go. First, I got the old pixie kit to oscillate and then ripped it apart for parts to another project (non-radio). Then I procured a second Pixie kit from ebay and built that. It oscillated right away! Still no contacts; my CW is... improving.

 

  All this to say that I still had an itch that wanted scratching Enter: The Color Burst Liberation Army! Not only could I truly build something from scratch, I could follow my true calling and de oppresso liber some crystal. So I pulled some 30 (or so) gauge magnet wire from an old CRT. I had wound and rewound my coil three times (and unfortunately, the third one looks the worst) for 80m then 20m (far fewer turns) and back to 80m with N'JOO (No Joy of Oscillation) in any configuration. I am using a polyvaricon pulled form an old AM/FM transistor radio, the Mitsumi PVC-2FX which has 82 pF, 140 pF,  20 and  40 pF sections which I have wired in parallel giving me ~0-282 pF of range? And finally, I was using a MPS A42 NPN transistor. I had to run some resistors in parallel and some caps in series to get the right values, but I eventually got it all together and looking pretty smart on a 1" x 1.5" piece of perf board. Alas! Nothing!

 

  I was poking around at the circuit and realized that when I keyed the transmitter, the coil would get really hot right at the tap. I still don't know why that was, but I figured it was a good sign as it meant something was happening. I also was getting plenty of pops and clicks on the receiver. Anyway, to make a short story long, I decided that the dark mark under the transistor was a bad sign, found an NTE 123 and plugged it in instead. And oh what a wonderful day to hear the first warblings of my very first all scratch built transmitter hitting the airwaves! And here is the video: https://youtu.be/yq2M1ryMkII

  

  Probably more than you wanted to hear, but there it is. I do plan to build an SSB transceiver someday (hoping sooner than later). I feel you and Pete and your podcast have really set me out on the right foot! I hope to HB2HB with you soon!

  Sincerely,

    Eric KD0OXY

Goats, a Paraset, and a QSO with a Mighty Mite! (Video)

This is a really wonderful video, made even more wonderful near the end by the appearance of a Michigan Mighty Mite!  Thanks Steve!  Thanks Nick!  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Mighty Mite with Homebrew Capacitor Made from Two Cans (video)

Paul Hodges, KA5WPL, didn't have the variable capacitor called for by the Michigan Mighty Mite schematic.  So in the true spirit of the International Brotherhood of Electronic Wizards, he rolled his own!  He used two empty aluminum cans and some electrical tape.  Wow,  that's really cool Paul. 

You have truly earned you membership in the Color Burst Liberation Army, and for the capacitor I award you the prestigious Brass Figlagee with Bronze Oak Leaf Palm.

Midwest Mighty Mite from KK0S

Wow, beautiful job Bruce.  I was hoping that a check of the Reverse Beacon Network would reveal that someone had heard you, but no joy.  Keep at it.  You may become the first CLA member in this round to make a contact.  

Bill - 

Hello from the Midwest chapter of the CLA.  Here's pix of my just completed Michigan Mighty Mite.  Nothing was purchased specifically for this project.  It was put together using only parts already on hand.  The only previously unused parts were the front panel sockets and one resistor.  The rig uses a 2N2219A transistor salvaged from a junked industrial control board and a color burst crystal that actually first oscillated in a tube-type color TV some 40 years ago.  Loading into my ground-mounted vertical, this MMM seems to be most stable at a draw of 87ma at 12.6 volts.  The arithmetic seems to work out at somewhere around 650mw into the ether.  I called for about half an hour around 2300Z, but got no takers... it was still pretty early for 80m and I had an extremely high local noise level.  The rig seems to run about 1khz high. I'll give it another go this weekend. 

72 - Bruce - KK0S.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20