Some Links for the Michigan Mighty Mite and the Color Burst Liberation Army from Dave K8WPE

Dave K8WPE has been one of the podcast's best friends and one of its most loyal listeners.  Dave was recently going through some back issues of SolderSmoke.  This sparked a renewed interest in the Michigan Mighty Mite and the Color Burst Liberation Army.   Dave sent us some useful links on this subject.  (I had forgotten about the .io CBLA mailing list!)   Thanks for this Dave, and for all your support and friendship over the years.  

--------------------------------------------------------

Guys and Gals

Please listen to some of these podcasts as they are very encouraging to any ham young or old that might want to build something, even as simple as a Michigan Mighty Mite transmitter. Here are references to the Michigan Mighty Mite.  The podcasts are listed below.

https://makerf.com/posts/mighty_simple_shortwave_transmitter

https://www.qsl.net/wb5ude/kc6wdk/transmitter.html

https://qrpguys.com/mmm-40m-transmitter and others.

Check out podcasts # 166, 167, 168 in the Soldersmoke series for an in-depth discussion on this simple transmitter:

https://www.soldersmoke.com/

There are many YouTube videos also regarding this neat little transmitter and even companion receivers.

https://youtu.be/anxxs-G1MI4

Another option is to build the Cricket (a full transceiver kit) from Four State QRP Club that is available for 20, 30 and 40 meters $34.70 shipped:   

http://www.4sqrp.com/kitIndex.php

Or the 80 enter one available from the designer (when the 4SQRP Club retires a kit the designer is free to continue to sell them himself) NM0S on eBay for $26.25 shipped:

  https://www.ebay.com/itm/255527833693?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AY5tgwaxQqO&sssrc=2349624&ssuid=MVIQRp0MSZK&var=&widget_ver=artemis&media=COPY   for $26.25 shipped.

If you build one of these kits John at 3rd Planet Solar in Gaylord has bags of crystals and a four position crystal switch kit for the Cricket and Pixie. Check him out at 

https://kc9on.com/

Please pass this on to your friends. Have fun. Build something.  Enjoy!  One person built the kit and framed it to put on the wall of his shack to PROVE that he could actually build an electronic gadget.  

Also there are many who use easily available color burst crystals from old TV sets and joined the Color Burst Liberation Army (CBLA). Check out 

https://groups.io/g/cbla

http://soldersmoke.blogspot.com/2021/05/michigan-mighty-mite-joy-of-oscillation.html

Dave K8WPE since 1960

Vienna Wireless Winterfest Hamfest 2022

After a two-year pandemic hiatus, yesterday the Vienna (Virginia) Wireless Society's annual "Winterfest" hamfest was back.  And the weather was in fact COLD -- it definitely felt like Winterfests of years-gone-by. 

Club President Dean KK4DAS kindly invited me to participate in a forum on homebrewing.  You can watch the presentation STARTING AT 2:04:06 (hours:minute:seconds) here: 

https://www.youtube.com/watch?v=s48of3uS9tM

It was especially cool to be able to tell the audience about Pete N6QW and Farhan VU2ESE. We talked about Pete's Simple SSB transceiver, the Michigan Mighty Mite and the BITX rigs. 

Some observations on the hamfest scene: 

-- There are lots of boatanchor radios out there, and it seems like a buyer's market.  These old rigs do not seem to be selling nearly as fast as they did a few years ago. 

-- There is a lot of older analog test gear on sale too, and it too seems to no longer be as in demand as it was a few years ago.  Perhaps the availability of cheap, small, and very effective digital oscilloscopes is affecting the sale of these once sought-after items. 

My purchases: 

-- A really old beat-up (crashed?) ARC-5 R-23 receiver.  I have already extracted the variable capacitor. 

-- A nice box of smaller variable caps. 

-- 100 feet of 550 parachute cord. 

-- Two nice metal chassis/boxes 

-- A bag of shaft adapters/connectors

With Armand WA1UQO (left) and Steve Boles W4SB (center)

With Charles AI4OT 

Thanks to Dean KK4DAS and the entire VWS team for a great event. 

Bill Talking about Homebrew Radio with L’Anse Creuse Amateur Radio Club (Michigan) -- February 2, 2022 (Video)

This was a very nice meeting.  We just talked homebrewing and why it is such an important part of ham radio.  Video above

Topics included:

-- Jean Shepherd

-- Being "Electrically Inclined" 

-- The Herring Aid 5

-- Radio Clubs around the world

-- The Shame Shelf

-- Making mistakes, releasing smoke

-- Errors in ham radio magazines and schematics

-- The importance of understanding the circuit

-- The Michigan Mighty Mite

-- Building a power supply for the HW-32A

-- The origins of the SolderSmoke podcast

-- Knack stories, the IBEW and what we all have in common

-- The importance of books

Thanks to The L'Anse Creuse ARC for the invitation. 

Dean's Supercharged, 16-Watt, Furlough 2040, Simple SSB Rig

 

'Tis a thing of beauty. 

It is especially appropriate for us to use that Irish phrase because the design of the rig's new final amplifier is out of  Ireland. Our friend Dean KK4DAS added a 16 watt RF amplifier based on a design by EI9GQ to his homebrew N6QW Simple SSB rig.  Note the IBEW label on the top. 

Here is Dean's blog post on this wonderful project (with video and more pictures). 

https://kk4das.blogspot.com/2021/12/furlough-2040-supercharged-final-bench.html

Dean has it on the air and is getting good reports.  He has clearly come a LONG way from his Michigan Mighty Mite build of just two years ago.  FB OM. 

Here is Dean's build of the EI9GQ 16 Watt Final

Final final assembly! 

16 W 

More info here: 

https://kk4das.blogspot.com/2021/12/furlough-2040-supercharged-final-bench.html

Another M^3: The Michigan Micro Mote

Move over Michigan Mighty Mite and Mate for the Mighty Midget.   There's a new M^3 in town.  And it is SMALL. 

Hack-A-Day had an article on this today, and while it seems only tenuously connected to ham radio, I found it intriguing.  

Check it out.  Who knows, someday people may be operating in "dust mode":  

https://hackaday.com/2021/10/04/snails-sensors-and-smart-dust-the-michigan-micro-mote/#more-498450

Michigan Mighty Mite, Joy of Oscillation, and the Color-Burst Liberation Army in Washington State

 

Perhaps its the result of a vaccine-induced relaxation of COVID tensions, but for whatever reason we are seeing a resurgence of interest in the Michigan Mighty Mite and the Color Burst Liberation Army. 

Dan AF7O describes his excellent MMM CBLA adventure here: https://af7o.campclan.net/?p=144  Extra points for the use of George Dobbs' Ladybird book technique, and for the 3D printed variable cap holder (made by Dan's son). 

Yes Dan, rebuild that antenna, build an LP filter, and get that MMM on the air.  At the very least you can get some reports from the Reverse Beacon Network.  And, as Jack NG2E recently demonstrated, it is possible to make contacts with a simple rig like this: 

https://jackhaefner.blogspot.com/

LONG LIVE THE COLOR-BURST LIBERATION ARMY! 

Ciprian's Romanian Ten Minute Transmitter with Roots in SPRAT, KA4KXX, and the Florida Sunrise Net

It sounds great Ciprian!  It was really cool to see your video and hear you reference not only the SolderSmoke blog, but also SPRAT, the Michigan Mighty Mite, and Walter KA4KXX. Your little rig has a very fine lineage!  

I found Ciprian's video just after seeing the wonderful Herndon Mighty Mite of Jack NG2E.  TRGHS!  The Color Burst Liberation Army is on the march!   For more info on NG2E's Mighty Mite, check out his blog: https://jackhaefner.blogspot.com/2021/05/mounting-to-perfboard-and-scope-test.html 

Jack has in his possession one of the  7.123 MHz crystals that Walter KA4KXX sent me back in 2019 (during my ET-2 craze).   It seems obvious that Jack should build a Ten Minute Transmitter and use it to check into the Sunrise Net  https://qsl.net/srn/. 

A New Michigan Mighty Mite Oscillates in Northern Virginia

We are pleased  to report that OM Jack, NG2E, has successfully built a Michigan Mighty Mite transmitter, and has experienced JOO (the joy of oscillation). You can see Jack's prototype in the video below: 

Jack has his eye on more ambitious homebrew projects, but is wisely taking a step-by-step approach.  He described his plans this way: 

1. Capture this MMM into a semi-permanent design: ie, perf board.
2. Measure performance. What does the carrier wave look like on a scope? 
3. Build a low-pass filter.
4. Can I amplify the signal? Maybe add an amplifier stage or two. Transistor? 
5. Next, let's look at receivers. Pete & Bill recommend that I build a Direct Conversion receiver. I know Peter Parker (VK3YE) has a simplified version. 

Homebrew Lives! TWENTY N6QW Simple SSB Transceivers Under Construction in Northern Virginia

IF strip by Don KM4UDX

This has to be one of the most successful of SSB group-build projects.  Dean KK4DAS has been leading 20 members of the Vienna Wireless Society in the construction of N6QW's Simple SSB Transceiver, with Dean's "Furlough 40" additions.  This is very FB, and very encouraging.  Dean clearly has The Knack.  Just two winters ago I was smuggling a 3.579 MHz crystal to Dean for use in a Michigan Mighty Mite.  He has clearly made a lot of progress.  

-------------------------

Dean writes: 

It has been just over a year since I completed my initial build of the Furlough 40 with much coaching and assistance from Pete. Mike and Don are two out of 20  members of the Vienna Wireless Society Makers group that is working on a group build the SimpleSSB project as enhanced by me to include features like CAT control for digital modes.  Beginning about six weeks ago the group is progressing module by module per SolderSmoke best practice advice.  We started with the audio amplifier, followed that with the Arduino/SI-5351 based controller module and the builders are just completing the IF module.  This week at our weekly meeting, Mike proudly showed off his success.  

-------------------------

Read all about it, and see some really great videos here:  

https://kk4das.blogspot.com/2021/04/homebrew-lives-furlough-40-simplessb.html

Leon NT8D's Front Panel

My Hodgepodged Morse: Audio Tone into the Mic Jack Creates J2A not A1A. BASTA!

In SolderSmoke podcast #229 Pete and I were discussing my rather flaky effort to turn the Hodgepodge BITX40 Module into a CW rig by injecting keyed 700 Hz audio into the mic jack (see video below). We got some very helpful responses from ND6T and VK2EMU:  

Hi Bill,

You mentioned generating CW by modulating SSB: Collins did that in their

first SSB transceivers, I believe, as did SGC, but the results were less

than optimal. The problem is that you are involving the audio chain and

modulator. You know from experience how difficult it is to maintain low

intermod there and the tone is no exception. So we end up with lots of

spurs within the filter passband and then also have the opposite

sideband suppression less than perfect. If you check your transmitted

signal with a spectrum analyzer or SDR you can easily see the nasties.

Listening to a CW signal thus generated makes it obvious unless it is

buried way down in the noise. It IS a valid CW signal (not MCW) since it

is (almost) a single signal. However, in actual operation it doesn't

work very well.

I know because I have done that. I bought one of Farhan's original

BITX40 boards and wanted to put it on CW. I ended up injecting a keyed

signal from one of the spare clocks on the Si5351 into the RF amplifier

chain (thus avoiding the above stated problems) but still had garbage

from the audio and IF stages. I fixed that by shorting out that signal

during transmit by a transistor to ground. That was documented on your

BITXhacks website: http://bitxhacks.blogspot.com/2017/02/ and on my

website: http://www.nd6t.com/bitx/CW.htm . It has been a while, eh?

...

Don, ND6T

--------------------------------------------------

Hi Bill and Pete,

With putting an audio oscillator into you hodgepodge radio, your transmission is not the same as a standard CW rig.

If we have a transmitter as described in the ARRL handbooks from the 1940's or 1950's, (or even the Michigan Mighty Mite) it is a crystal oscillator and maybe a PA tube. By keying either the oscillator and/or the final PA on and off, then we can send Morse code as ICW Interrupted Continues Wave. If we check the list of emission designators, we have A1A.

However, if we feed a tone into a SSB transmitter, then we have J2A.

At the other end it may sound the same, but because it is created in a different way, it has a different designation. 

A quick look at Part 97 shows that J2A and J2B are classed as CW, so you are in the clear. However, if you put a tone oscillator into an AM signal to send CW, then that would be classed as A2A and not classed as CW, but as MCW. MCW can be used on 6 meters and above, but not HF.

SITS.

73 de Peter VK2EMU

-----------------------------------------------------------

So I say BASTA with the J2A!  If I want to go CW, it's all A1A for me.  I dusted off my Fish Soup 10 and am now back on 40 CW with 200 mW.... A1A all the way! 

 

A Quarantine Mighty Mite

'Tis a thing of beauty. 

Bill/Pete:

    I just decided here over the COVID period to head back to basics here and build a Michigan Mighty Mite with a Color burst crystal I had here. And wouldn't you know it, it works!  Here's a couple of pictures, it's not pretty at all. Needs to be mounted on something. 

Don KC9ZMY

Overcoming the Complexity of the Michigan Mighty Mite: Walter's Sunrise Net Special

From Walter KA4KXX
June 21, 2020

Michigan Mighty-Mite:  Why So Complicated?

The April 2020 issue of QRP Quarterly magazine featured an article by Bob Rosier K4OCE which included a schematic for a “Ten Minute Transmitter” by G4RAW (SK), which apparently first appeared in SPRAT 82 in 1996. 
It is even simpler than the Michigan Mighty Mite, so this transmitter can truly be built on a solderless breadboard in about 15 minutes, because a complex coil is not required.  
The only tuning needed was for me to establish the correct value of the output series capacitor. 
This rig allowed me to check-in to the Sunrise Net (see details in blue text on my QRZ page) today on my very first attempt, and landed me a 549 signal report from 250 miles away.
The first photo shows the transmitter connected to a Transmit/Receive Switch mounted in an Altoids box. In the Transmit position the antenna is disconnected from my 1979 Heathkit HR-1680 receiver, which then coincidentally supplies a sidetone at an ideal volume level.  That little black pushbutton which can be seen in the second photo serves as my key, and works just fine for a five-minute daily QNI on the Sunrise Net.
Of course, part of the secret is having a crystal exactly on the Net frequency, and I have a few left, free to whomever in the Eastern U.S. is interested in building one of these simple Sunrise Net Special Transmitters and participating in our Net. 

Adam N0ZIB's FB Station (and UGLY Michigan Mighty Mite)

Bill and Pete, 

Thanks for the work you put into your podcast. I’ve been listening to it on my commute and while at work (I’m a welder/fabricator). Fantastic content.  Keep up the great work.  

All your talk about Farhan and the Ubitx convinced me to order one.  I welded an aluminum case for it and upgraded to the Nextion 3.5” screen. Also added a tuning knob from a Heathkit SB-401.  So far I’m really enjoying this rig. Plan to add an audio amp (to drive a larger speaker) and a CW filter to it this weekend.  In the station picture I sent I also show my paddles made from a hacksaw blade and stainless steel hardware. It’ll send 25 WPM before it gets a little sloppy.  My QCX 40 is also pictured.  I have a commercial rig too but find I’m not using it very often. 

Plan to start building the simpleceiver soon and maybe a bitx 17 too. Your podcast played a big part in convincing me to pick up a soldering iron again.  You guys are awesome.  Keep it up.  

73’s

Adam

N0ZIB

(Pete noticed that the main tuning knob on Adam's uBITX was NOT from Heathkit but was instead from a Collins KWM-2 or 32S3.  He advised Adam that the knob would sell quickly on e-bay.  It did, and will finance additional N0ZIB homebrew projects.  We are thinking of adding these knobs to our SolderSmoke Retirement Fund Portfolio.)   

Adam continues: 

I was listening to your older podcasts and heard several discussions about the Michigan Mighty Mite.  So this jumbled up mess probably doesn’t look like much but I built one. I need to order a 40 meter crystal and actually build it again on a board(with the coil rewound for 40) but my “proof of concept” build was a success. Using a variable cap from a Hallicrafters S20-R and the crystal holder from a Heathkit.  

Dean KK4DAS Builds SSB rig, Makes First Contact.

You can almost see the excitement in the notes (al fresco!)  of Dean KK4DAS.   He made his first QSO with a homebrew transceiver this week.   Not long ago Dean was taking his first tentative homebrew steps with a Michigan Mighty Mite.  Wow, he has made great progress.   

Read all about it on Dean's blog:  https://kk4das.blogspot.com/2020/04/furlough-40-first-contact.html

Congratulations Dean! 

WB9IWT's Quarantine Mighty Mite and N3FJZ's "Hiram Percy Maxim Recognition Factor"

Leif WB9IWT has, during the emergency, been working on a Michigan Mighty Mite (See pictures above and below).  FB Leif.  

But also check out the very astute comment from Rick N3FJZ (below) .  I am, of course, all in favor of the HPMR Factor.  Almost all of my rigs would score quite high.    Others, I know, would seek a low score.  To each his own.  This is all for fun.  

Leif,

Great work.  If a ham from the 1920's were to see this rig, they
probably wouldn't recognize the actual components right away (but
knowing hams, they would no doubt figure it out), but the breadboard
layout circuit flow would be immediately recognizable; e.g. the plug-in
crystal, the coil, binding post.  The transistor and variable capacitor
may baffle them at first, but seeing there are three leads on the
transistor would start to give them clues.

That's the cool part about analog discrete component radio, no matter
how many years go by, and the appearance and size of the actual
components change, the physics of what's going on at the electron level
stays the same (SDR not withstanding).

I guess this could be a litmus test for us analog radio builders.  It
could be called the "Hiram Percy Maxim Recognition Factor" or "HPMR
Factor" with a range of 0 to 1.  After you  build your rig, take a look
at it and pretend that you could present it to Mr. Maxim and the more he
could understand the circuits, components and circuit flow on his own,
the closer to a factor of 1 your radio would achieve.  For example, an
SDR might only achieve a factor of .1 or even maybe 0, where as your rig
may achieve a factor of .8, and one of your crystal receivers would
definitely get a 1.

Someone could even workout a check list or formula where you would add
or subtract some fractional numeric values for each component you used;
e.g. you would subtract some value for every IC chip, microprocessor or
LCD display you use, and add some fractional value for each hand wound
coil, vacuum tube/valve or open air variable capacitor, et cetera.

Fun to think about.

Keep building.

Rick - N3FJZ

For Inspiration and Education: Dean's Radio Blog (with video)

Be sure to check out the blog of Dean KK4DAS.   He is a new homebrewer who is having great success with one of Pete Juliano's ingenious SSB designs. Dean has a video of his receiver working -- AL FRESCO -- as construction on the full transceiver proceeds.   

This is amazing.   Just a short time ago Dean was taking his first steps as a homebrewer with his version of the Michigan Mighty Mite.  He has followed the advice of the Tribal Wizards and has proceeded slowly, step by step, stage by stage, gaining the experience that has allowed him to actually build a superhet receiver and be on the verge of completing a full SSB transceiver. 

Lots of inspiration to be found on Dean's blog.   Check it out: 

https://kk4das.blogspot.com/2020/03/dean-kk4dass-furlough-40-ssb-rig.html

SolderSmoke Podcast #217 -- Beach trip, '30s station, uBITX mods, HRO RX AM, ELMAC, Teensy, MAILBAG

Bill's Bavaro DR Beach Station
uBITX in the box, HB key

SolderSmoke Podcast #217 is available: 

http://soldersmoke.com/soldersmoke217.mp3

1 February 2020

Travelogue!  Dominican Republic trip.  uBITX on the Beach.  EFHW.  LiPo Battery.  First contact of the new year. 

Bill's Bench Report

Following up on proposed uBITX mods: 

-- Put pot on sidetone line from Raduino to keep the sidetone a bit quieter. 

-- Fixed the key -- pounding brass

-- Will install 4 States QRP Active AF filter. 

-- Need to reduce power on CW to 5W

-- Stereo to mono headphone adapters. 

-- Turning off display and mic amp circuit not really worth it -- they don't pull much current. 

Pete's Bench Report: 

ELMAC Power Supply project 

1930s era transmitter? 

Teensy and SDR

PETE'S IDEA ABOUT GETTING LSB AND USB FROM BITX40

KWM-2 suggestions

Back to Bill's Bench:

Working on HRO-ish Receiver. 

Bad SBL-1  

Got idea for wider ceramic filter from Paul VK3HN

Ordered parts from Mini-kits in Australia.  They sent 6kc filters. 

Bruce KK0S sent me some 10 kc filters too. 

Installed 6 kc filter with L network matching networks.  Works great. 

Also installed Infinite Impedance Detector that Paul used. 

Needed some additional amplification ahead of the IID, so I used one stage of BITX amp. 

Works great. I can tune full 40 meter band AND 49 meter SW band.  Radio Romania, China, Radio Marti, Brazil, South Carolina. 

Beefed up the shielding to cut down on AM detection. 

MISCELLANY

-- AM and DSB in LTSpice

-- Duly Noted:  Paul  VK3HN's RIG:  "THIS MACHINE KILLS KILOWATTS"  

Kanji YC3KNJ's QRPesso Expresso Coffee in the field

-- The DANGERS of powerful magnets. 

MAILBAG: 

--KK4DAS Dean doing great things.   MMM heard at Penn State.  Where is the rest of the CBLA?

-- Thanks to Don for kind donation to the SolderSmoke cause

-- Dale BA4TB -- First SolderSmoke feedback from China.  Thanks Dale!  

--Steve Silverman:  Sideswipers and bugs were made to handle "carpal tunnel of the day"  So do I need a keyer for casual CW work? 

-- Peter VK8VWA on the limited knowledge gained from kit building. Listens to podcast while walking on the beach in Australia. 

-- Allan Hale -- Clothes Pins as Toroid holders.  Yes!  More Clothes Pins   Wild Woody Keys from Dave Ingram 

-- Pete WB9FLW  100 Watt Amp from WA2EUJ  

-- Dave Wilcox K8WPE   A medical question:  Does the Michigan Mighty Mite work differently depending on what kind of medicine was in the pill bottles used for the coil form?  Good question Doc!   Dave suggest that putting CBD on the coil or the crystals.   Anything to mellow out the ham bands... 

Pete's Plank SDR
When you know stuff, you can do stuff!

KK4DAS Michigan Mighty Mite Heard by WEB SDRs -- CBLA Mobilized!

Dean KK4DAS continues to do great things with his Michigan Mighty Mite.  He has been calling CQ on the Color Burst Liberation Army (CBLA) frequency of 3579 kHz.  I think I was the first one to hear him, but since that memorable moment he has been picked up by multiple Web SDR receivers, including the one at Penn State (PETE JULIANO'S ALMA MATER!)  (screen shot above, listen by clicking URL below).  He has also been heard by Web SDRs in Concord Mass,  Newport News Va, and Cleveland, Ohio.  FB Dean.  

So come on folks -- this is a mobilization call for the CBLA!  Get those MMMs on the air.  Send us reports and recordings from Web SDRs or the RBN. 

Listen to Dean's MMM as received at the Penn State Web SDR: 

http://soldersmoke.com/KK4DAS MMM.wav

It sounds great!  And nice CW Dean!  

Dean KK4DAS Puts Michigan Mighty Mite on the air! And is heard in Falls Church, Virginia! (video)

QRZ.com says we are 5.9 miles away.   The U.S. Postal Service almost prevented this from happening -- they objected to my just putting the crystal in an envelope and mailing it.  Dean's wife had to pay postage due.   

The rig didn't work at first, but Pete N6QW provided sage advice and tribal knowledge.  Adjustments were made and Dean experienced the Joy of Oscillation.  Then, he connected an antenna and was heard at the SolderSmoke East Coast HQ. 

Obviously the beret was the key to Dean's success: 

This was a lot of fun.   And it is a reminder of the power of the MMM.   Dust off those Mighty Mites!  Call CQ and see if you can be picked up by the Reverse Beacon Network.  Let us know if you succeed.   

Getting ready

Done!  Dean's MMM

The Return of Pete's Simple-ceiver Plus (and a possible analog option)

Winter is approaching ladies and gentlemen, and it is time to think about radio projects.   Bob N7SUR suggested a direct conversion receiver project.  I think this is a great idea.   As a kid, I had fallen victim to the idea that building receivers was "too hard" for radio amateurs. Not true!  DC receivers to the rescue!  Carry on with the DC revolution first launched by Wes W7ZOI in 1968.

Pete N6QW is providing guidance and tribal knowledge via his blog.  For those of you who want to join the ranks of those who have defied the conventional wisdom and have broken through the "receivers are too hard" barrier.  I say build yourself a DC receiver.  Build it from scratch.  Many of you already got your feet wet in homebrewing with the Michigan Mighty Mite project.  Now it is time to jump into a DC receiver project.  

You folks already know what kind of VFO Pete will prefer:  It will be an Si5351.  That's fine.   But I will try to keep the banner of discrete component analog ludite-ism flying high.  This morning I ordered a batch of 7.37 MHz ceramic resonators.  I hope to pull them down into a significant portion of the 40 meter phone band.  If this works, I will share the batch with anyone who wants to joining my Analog Army (remember the CBLA?).   Note (above) that Pete has magnanimously left open the possibility of using a non-digital VFO. What a guy!    

Check out Pete's project here: 

http://n6qw.blogspot.com/2017/08/a-new-line-of-transceivers-difx_19.html