Podcasting since 2005! Listen to Latest SolderSmoke

Tuesday, January 20, 2015

All of the Shortwave Spectrum LIVE on Web Waterfall Display


It's been a while since I checked in with this site.  They have made a lot of improvements.  It is very impressive.  I had trouble with it using Internet Explorer, but it worked right away using the Google Chrome browser.   Play with it a bit.  Zoom in on 40 meters.  Listen to the LSB contacts.  Very nice. 

http://websdr.ewi.utwente.nl:8901/


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, January 19, 2015

When Your Local Oscillator Could Sink Your Ship!


Thomas KK6AHT is the intrepid radio amateur from France who moved to California and successfully built a Minima as his first homebrew project.  Yesterday we got additional evidence that Thomas definitely has THE KNACK.  It seems that he has been looking through really old radio magazines (clearly a symptom).  He sent us this add from 1942.  Yikes!  Imagine getting your ship sunk because your Local Oscillator is not quite local enough!  
.....................


Hey!
I thought you would get a kick out of this 1942 ad. Sounds like those guys had a some good reasons to fight QRM ... Who knew the important role played by the FCC during the war?
Now tell me: why were the receivers so noisy at the beginning of the war? What did they change? Happy new year to you both! May the gods of radio (and digital) bring you much fun on the air.
73, Thomas  

..............................


Hi Thomas,
Well Thomas, I will dip my toe into some very deep water and attempt an answer for you which also is an important clue about QRP operations.
  1. Today we have many many signals co-existing in the radio spectrum. During the war there was much less radio garbage and the military lit up the ether with transmissions very sparingly. But that is on the transmit side. That said the local oscillators (much like you have with the Si-570 on your Minima) used in receivers also produce RF that unless is minimized in some fashion is passed right through to the antenna and can be detected. Regenerative receivers are especially prone to this. Yes some military equipment used regenerative receivers. In fact the famous Paraset had to be constantly moved so it would not be detected.
  2. This receiver generated RF into the antenna was addressed by companies like Scott by shielding everything. That receiver in the photo probably weighed about a 100 pounds or more. Much attention was paid to RF bypassing and grounding. The cheap table top radios were RF generators par excellence.
  3. There was another approach developed in WWII to solve that problem and forms the basis of what makes work that little device sitting in your pocket. The odd part it was invented by a famous movie star. Look up Heddy Lamar in wikipedia. She and a co-inventor came up with the concept of frequency hopping and spread spectrum technology. By jumping frequencies it would be hard to pinpoint a transmitting station. That concept forms the backbone of our cellphone system
  4. Now the QRP part – if the RF output from a receiver local oscillator (milliwatts) can be detected from afar – then it follows QRP works!
Have fun. 

Pete



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, January 18, 2015

Digitizing the Barebones Superhet


I did this for Pete.  And I did it to start out the new year with something different.  And because I needed the crystal for my beloved BITX and didn't want to buy more crystals. 

After successfully broadening the filter in my Barebones Barbados Superhet (originally built by Dale Parfiit W4OP) I decided to replace the VXO with an outboard Arduino/DDS device. Nothing new in that  (I was playing with this back in October), but in what I think is a symbolically significant twist, I pulled out the tuning cap for the VXO and, in the hole left by the tuning control, replaced the knob with a BNC connector.  That connector now carries DDS signals into the receiver.  The crystal was at around 23.125 MHz -- that's why the LCD display is showing 23 MHz.  

It works great.   I was listening to the DX station in Iran this morning.  

Here is a video of the October 2014 experiments: 


   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, January 17, 2015

Colin Finishes His BITX


Wow, that is one beautiful BITX.  Nicely done Colin.  But I must say that you are exhibiting an almost inhuman degree of patience!  Who needs a case?  Fire that thing up and make the traditional "still-on-the-workbench" initial contact. 

Hi Guys,
I loved the last SolderSmoke, it was another great episode. It really does amaze me, that a few years ago, hams were saying that it was too difficult to build your own gear that would be anywhere near to the commercial stuff, but here we are with Arduinos etc bringing powerful functionality to the masses. I couldn't have imagined building an SSB rig with a pretty and functional LCD screen when I started in ham radio.
Bill, first regens, now SDRs? Amazing! I exchanged a few words with George Dobbs about your change of heart towards regenerative receivers, he seemed genuinely pleased. :)
Pete, your Si5351 work with the pretty displays is cool, I can see me getting pretty hooked! I have the Si5351 board, Paul M0XPD advised me to buy it. I'd love to build another SSB rig in a smaller box for regular SOTA activating. I must look into the pretty little displays and have a play with the Si5351. I notice that Hans Summers has now put out a cheap Si5351 based kit, handy for us guys in Eu. http://www.hanssummers.com/synth.html
I finished building my BITX board yesterday but wanted to have a sleep before applying power! Today I carefully checked the circuit for errors and found none, phew! I fired the rig up gently, watching the current carefully. I wound up the TX bias to 50mA as stated in the MKARS80 instructions, all went well. I plugged in the mic and spoke - BANG! - Everything went off. Oops - I had used a 500mA fuse for initial safety and forgot to swap it for the bigger one! I fitted a 1.6A fuse and hey presto, all was fine. I was absolutely amazed and to be honest, rather proud of myself. I think the TX is a little bit too hot, my meter is showing about 6W on voice peaks- eek! The rig seems to be perfectly behaved though, no wierd effects seem to be happening. I can just turn the bias down a bit, right?
Anyway, I was happy with my progress so I finished for the day. I still need to investigate and probably tweak the carrier suppression.
I spent a short while talking into a dummy load, using my FT817 to monitor the transmission. My 2yr old son was interested in my voice coming out of the 817'sspeaker!
Thanks for all the guidance and help along the way, I'm elated that I've built a voice rig that works! I've attached a pic of my finished board, I only just squeezed the circuit on, but isn't she pretty? :-)
Can't wait to get the rig built into it's case and score that first QSO.
73, Colin, M1BUU


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, January 16, 2015

Kansas Mighty Mite

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, January 15, 2015

Pete's Beautiful Tiny Color Display


Oh man, this is the kind of thing that lures me ever deeper into the digital morass.  That would be hard to do with my beloved discrete analog circuits!    Be sure to note the size (it is sitting on the top from a pill bottle -- you can also look at the pen for a size reference). It is 1.25 inches by 1.25 inches.  Pete has it working with the Si5351 software.  As you can see there is still room at the bottom of the display.  Pete notes that an SWR readout is possible.  And Pete got this device for FIVE BUCKS! 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, January 14, 2015

Broadening the Barebones Barbados Receiver


I've been working on the crystal filter of the Barbados Barebones Superhet receiver.  This was designed by Doug DeMaw in 1982.  This one was built by Dale Parfitt W4OP and then repeatedly modified by me.  It is now on 17 meters with a crystal-switchable VXO.    Earlier I had made a very crude attempt to broaden the filter from its original very narrow CW configuration.    This week I did this again, but this time I actually characterized the crystals and used Wes's LDA and GPLA software (from EMRFD) to design the filter.  

I played with the capacitor values and finally got the 3 kc bandwidth I wanted, but I'm having trouble getting rid of the ripple.   I know this is dependent on the impedances at the two ends.  The programs say I need 2000 ohms.   

I'm kind of puzzled about how Doug DeMaw did this with his original design.  For his crystals and his 250 Hz (!) bandwidth he said he needed 450 ohms.   He used 4.7:1 turns ratio transformers at either end and said that by putting 10k resistors across these transformers he got the needed impedance.  I can see how this would work looking into the gate of the 40673 IF amp, but looking back at the drain of the 40673 mixer, I'm not so sure that that would yield 10k. (See schematic below.)

But who am I to doubt Doug?   So I assumed he was correct about the 10K and I re-wound the transformers with a 2:1 turns ratio, thinking that would get me closer to the needed 2k.   But the ripple is still there.  I guess I could use a return loss bridge at this point... 

I don't know whether this is worth messing with anymore.  The receiver sounds nice.  The 3kHz bandwidth gives it a nice sound, and the ripple doesn't seem to be noticeable  That FAR circuits board is tightly packed and difficult to work with.  So, should I leave good enough alone, or should I proceed with fanatical ripple eradication.  Any advice?

BTW:  Why is it that receivers always seem to sound better when opened up (as above) on the workbench?  

 

 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, January 13, 2015

Kai's Redwood Mighty Mite with Poker-Chip Hacksaw Key


And Check out Kai's homebrew key:



Hi Pete,
 
  Thanks for your kind words.  I really enjoyed the MMM project, first analog oscillation 😊.  Your right about the homebrew key being a hacksaw blade and a few pieces of plywood.  The knob is an old poker chip.  You can adjust the spring tention by moving the blade in and out of the plywood.  Travel can be adjusted by raising and lowering the bolt under the blade.  I needed something for CW and wanted to stick to the ham maker thing.  As for me sending lefty, I do that so I can switch when the right gets tired or I need to hold ipod for video.  Thanks for what you add to soldersmoke.  73.
 
Kai
Ps I will send picture of key.

On Monday, January 12, 2015, Pete Juliano <jessystems@verizon.net> wrote:
Hi Bill,
 
Wow –so cool! I was impressed with not only his M^3 but the homebrew key and sending with his left hand.
 
It would be nice for Kai to send us his details for the key.  It looked like a hacksaw blade sandwiched between some plywood blocks of wood and some sort of plastic tuning knob from a defunct transistor radio as the key knob. Now that is what I call homebrew –elegant and it works well!
 
73’s
Pete N6QW

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, January 11, 2015

SolderSmoke Podcast #170 Double A DX-pedition, SI5351, Mighty Mites, Phasing Dreams


SolderSmoke Podcast #170 is available: 

http://soldersmoke.com/soldersmoke170.mp3

Bill's Double A, DSB, Dipole, Dominican DX-pedition.  
             Living the "How's DX?" Dream
Seeing the Southern Cross with Soviet Binoculars
Pete goes remote 
SI5351 a chip with a lot of potential
Pete's experiments with Nokia LCD displays 
Michigan Mighty Mites around the world
               The Postal Stream Roller
Steve Silverman's very kind variable cap offer
MOXON modeling with EZNEC
Aspirations for 2015

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, January 10, 2015

"Gentlemen, We have Oscillation!" Jacob's California Mighty Mite


Bill and Pete,

I bring news of the California Mighty Mite as Bill dubbed it.

I repeated the steps as documented in version two with Pete's parts. I had one hiccup. I was winding L1 with Pete's red wire when, on turn 42, I ran out. Luckily a search of the workroom revealed the last two coils of radio shack magnet wire that I bought with the Gold wire. I checked the thickness of the Green-coated wire and found it to be one gauge smaller than Pete's wire. To be ready in time for the podcast, the green wire would have to do. It was fussier that the larger gauge wires, but with my trusty electrical tape, the L1 coil stayed on the coil-form quite neatly. Using a scrap of gold wire, I wound L2 making sure to tape it evenly spaced.

Next I remeasured each of the parts to be soldered and arranged them in according to the Schematic. With the Soldering iron hot from warming while I would the coil, I detached the 365pf varicap from the MMv2. I strapped on the heatsink to the 2N3058 transistor and soldered the 27Ohm resistor to the Emitter. I attached one pole of the Colorburst crystal to the solder tab on the varicap along with the stripped end of L1 coil. I soldered the Collector to the Tap-2 of the L1 coil, then the Base to the other pole of the crystal. I then attached the 10k resistor to the base and attached another red-magnet wire to the side of the varicap. Almost done I looped a 47nF ceramic capacitor to the  2 power posts of a DC connector, then wrapped the Tap-1, 10k, and the lead from the varicap into the pin (positive) solder tab of the DC connector. I took a second red scrap and stripped the ends, stuck it in the sleeve (negative) solder tab.

Two applications of solder later, the multimeter was back out for a final continuity check. After checking across every joint, I plugged in my power supply to the Mighty Mite. Reaching over to the shortwave I leaned in the power button and tapped in the Colorburst frequency, 3-5-7-9. Static filled the room as I made sure the radio was how I left it earlier that week. SSB mode, attenuator off, and volume up. My finger tingled as caressed the straight key, now wired to the resistor and negative line. I was scared something would melt or flame up when I keyed down. Well no way to find out, except to do.

 The key spring resisted, but I felt metal below as the key bottomed out. The radio let out a sound like rubber going down a slide and faded as I held down the key.

Gentlemen, we have Oscillation.

Revision 3 was a success. Version 1 being breadboard and Version 2 being Bill's crystal and what I had on hand.

I tried tapping out CQ, but was faced with the chirping fact that I haven't practiced in a year. I don't even know TEST let alone CQ CQ KK6JTL TEST. I turned the varicap to see if the sick squeal got any better with adjustment. It did and the pitch out of the radio changed after a bit. I must be changing frequencies! I spun around and fired up the computer. The RTL-SDR would show me what I was doing and who may respond, along with who I might be interfering with.

With the waterfall display zoomed in, showing about 5kHz around 3579kHz, I went back to the Mighty Mite. I saw one CW QSO going on in 3575kHz and two other spikes at 3576-3578kHz. Any guess at what those are? I knew since Sunday night I had been listening to JT65-HF. I reached over and held the key down. A big red spike went up at 3576.5kHz

I waited for quiet and keyed down. I turned the varicap to lower the capacitance. The spike moved to a higher frequency. When the varicap was half out, the squeal began to sound like a tone again. Problem was I was still at 3578kHz and still stepping on the JT65 signals. I called my wife in in excitement to show her and asked her to help me tune the circuit to the official frequency. I'm going to leave the varicap there for now. So I start it at 3577 and have to dial it back to 3579 to operate. I can almost go to 3580 with this little Mighty Mite.

Finally I was curious. I had forgotten to check the output of the transistor Pete sent me on my LC meter. So I got the datasheet from the Internet. The BC547A I had used in Versions 1 & 2 were rated for 325mW. The 2N3058 is rated for 5W. Pete, how much power does this put into an antenna when fed with 12V? Apparently not enough to wake my Radioshack SWR/Power meter. But that thing is hungry. It needs more than 2 Watts for it to function correctly.

Pictures attached. The transistor heatsink looks like it it touching the varicap in the pictures but I made sure there is plenty of gap. Too bad none of the pictures of that gap turned out. The wiggle in the waterfall picture is due to me turning the varicap to show range. Pete left a grounding wire on the case of the crystal. I chose not to remove it, but did not attach it to anything.














Congratulations Jacob!  You really hung in there, overcoming obstacles including the US Postal Service's Crystal-Crushing Steam Roller.  The rig looks great! 



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, January 9, 2015

Irish Mighty Mite



Hi Bill and Pete,

I couldn't stand it any longer, listening to you guys on the podcast and seeing all the Mighty Mites being built I had to have a go myself.  Concerned that I might plunge Soldersmoke into receivership if I asked for a free crystal to be posted to Ireland I used a 3.560MHz one, recently purchased from the GQRP club store.

2 amazing things happened when I was building it.

1) for the first time ever I had all the parts I needed in my junk box.  Since getting my licence in 2012 I've been gradually collecting and buying components.  It's so much easier when you find everything you need.

2) for the first time ever it worked straight away.  When I finished the last component I heard this voice from over my shoulder, it was Pete saying "Now go and noodle through the circuit and check your work"  Sure enough I'd missed one of the connections and everything else checked out ok.

So I plugged it in, hid behind the shack chair and turned it on.  Success!!!

Keep up the good work both of you!

73 de Chris EI6KH
Licensed since November 2012
Fists UK Member #15966
G-QRP Member #13730
Phoenix Radio Club Member
IRTS Member
MLS: IO63jk


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, January 8, 2015

W5RST's Mighty Mite + CQ article on Super Mite


I think Mike's MMM looks fine!   The CQ article he refers to has some very interesting ideas.   Here it is:  http://soldersmoke.com/SuperMite.pdf

Hi Bill (and Pete),

Well, mine is not as pretty as Chuck’s, but I put one together last weekend, too.  Before I added the lowpass filter, the output looked pretty ugly on the scope, but afterwards it was OK.  Mine puts out about 200 mW on 80 M. I’m thinking of trying the power modification from CQ to boost the power a bit (attached):  when you’re competing with W1AW on 3.5815, it can’t hurt! Sorry for the iPhone quality pictures...

73,
Mike

Michael McShan W5RST
Oklahoma City, OK




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column