Eldon, WA0UWH, says the podcast inspired him to build some QRSS transmitters for 30 meters. His first effort was atop a 9 volt battery. The latest version has a more traditional enclosure. Eldon hopes to be seen on some of the grabbers -- please help him out if you can. In my case the hard part was getting the transmitter into the frequency band for QRSS (only 100 Hz wide!).
Re: Is the design feasibility of 160M 625W Class D transmitter?
-
Quote from: vk3alk on *Yesterday* at 10:11:22 PM
Hi...
Not sure of your name or country not that it matters....
I am not an expert on CMCD but will give it ...
1 hour ago
Hi Bill,
ReplyDeleteIts really cool to see more QRSS stuff making the light of day. I've been following this for a while.
My approach right now is to build up a receiver for the other side of the QRSS.
I've built a DC receiver based on the Pixie 2 and an working towards a grabber for 80 meters to start with and work up from there to SDR, see; A Pixie2 as a QRSS grabber - part 1
I set up a webpage about the transistor if anyone is interested.
ReplyDelete2n3904.net