Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Some cynical readers will see this as yet another effort on my part to drive up the net asset value of the SSDRA2B Investment Fund, but I really just thought that those of you who have not had the pleasure would enjoy seeing a Drake 2-B in operation. Pity he didn't have the Q-multiplier. I'm sure some of the other 2-B videos on YouTube (there are many!) will feature 2-B regeneration.
Crystal Radios • Re: My setup
-
Thanks Homebrew. I love to hear info gleaned from practical experience. I'm
thinking about how to improve my antenna situation. I'm trying to come up
with ...
Skip Zones on 28 MHz - 26th Oct 2021
-
*Tuesday 26th October 2021:* As the solar flux jumped up to 109, it was
another good day on the *28 MHz* band with 538 stations heard on FT8 in 49
DXCC c...
Making Things Work Part #2 ~ Another Rant!
-
We Need to Protect Ourselves from Idiots!
Draw up the drawbridge, fill the moat with water, order in the chastity
belts as that is our last line of defens...
The Crystal Radio DX Contest
-
I first became intrigued with Crystal Radio DXing several years ago when I
happened across the above image showing the Crystal Radio DX Contest setup
...
20 meters, 200mW & 12,000 miles: WSPR magic!
-
Weak Signal Propagation Reporter is a global radio propagation monitoring
and reporting network comprised of thousands of low power beacons operating
on th...
Pink bits of rubber causing a blinking light...
-
A bit more than a week ago I volunteered for an aid station along the
route of the *Wasatch 100* mile endurance run - which, as the name implies,
is a 1...
Testing Audio Amplifiers
-
After finishing the microphone amplifier and the AF amplifier modules, it
is time to test them. For the experienced builder with scope and signal
gene...
Arduino Clock
-
Initial code using a 120x120 TFT display and a realtime clock module.
/*************************************************************************...
QLG2-SE GNSS/GPS Receiver kit
-
This GNSS/GPS receiver module kit is mostly SMD (pre-assembled), and
includes a high sensitivity active antenna with 2m coax and SMA connectors.
It has ...
More Projects with Telegram
-
*In the past years I had always blogged my projects, but due to time,
effort and format I had stopped doing that. But my projects continued,
and I have ...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasicknes...
Posts
Just keep promoting that 2B, Bill. My retirement fund needs a boost, HA!
ReplyDeleteActually, it'd take 'an offer I can't refuse' to pry my grimy hands from my 2B.
Nothing like that Great Drake Sound!
73 from satellite flyover country :-(
Steve Smith WB6TNL
"Snort Rosin"
I really like the calibrator for the analog display. I wish my cheap Radio Shack DX-100 had had this! The audio sounded nice even in the YT video.
ReplyDeleteWhat a gorgeous radio. I want!!
ReplyDelete