Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Some cynical readers will see this as yet another effort on my part to drive up the net asset value of the SSDRA2B Investment Fund, but I really just thought that those of you who have not had the pleasure would enjoy seeing a Drake 2-B in operation. Pity he didn't have the Q-multiplier. I'm sure some of the other 2-B videos on YouTube (there are many!) will feature 2-B regeneration.
Crystal Radios • Re: Measuring Capacitance
-
These are no doubt readings in pfd. Not sure what’s going on with the
1000pfd reading though. I’m assuming you’re measuring these while not
connected to an...
FTIOM & UBMP, June 27-July 3
-
From the Isle of Music, June 27-July 3: Part 2 of 2 parts: This week, our
guest is Rodney Barreto, winner of the Making Of category in this year’s
Cubadisc...
2021 ~ Building a surprising real KIT offering!
-
Sometimes you get Really Surprised!
But 1st a newly Discovered Chick Magnet! Nothing says Chick Magnet like a
pair of Ferragamo Sunglasses! For Fathers Da...
Single-Yagi EME
-
After being absent from *2m EME* (moonbounce) for the past couple of years,
I decided to spark-up again this spring to see if my simple system was
sti...
QLG2-SE GNSS/GPS Receiver kit
-
This GNSS/GPS receiver module kit is mostly SMD (pre-assembled), and
includes a high sensitivity active antenna with 2m coax and SMA connectors.
It has ...
Simple SSB Xcvr Mic Amp layout
-
Normally I would start with the audio amplifier board, but in this case I
will start with the microphone amplifier for two reasns. First it is the
simpe...
A cornucopia of updates…
-
Sigh. The new version of WordPress is doing stupid things with images. I’ll
fix them later. Okay, so roughly a month ago, I said that I was interested
in r...
BITX40 Rebuild Progress Report, MiscDotNews
-
In this post we’re going to catch up with what’s been going on over here at
MiscDotGeek and explain the gap in posts lately. We’ve been busy, and some
of...
More Projects with Telegram
-
*In the past years I had always blogged my projects, but due to time,
effort and format I had stopped doing that. But my projects continued,
and I have ...
Yet more new AVRs
-
In a previous blog I mentioned the new atmega4809 and AVR128DA parts. Well,
it seems I missed two other new families, the AVR128DB and AVR128DD series.
I’v...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
8 Band Superhet AM Receiver
-
Amplitude Modulation holds a fascination for me. It dates back to those
hours spent as a teenager listening to the big broadcast-like amateur AM
stations i...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasicknes...
Posts
Just keep promoting that 2B, Bill. My retirement fund needs a boost, HA!
ReplyDeleteActually, it'd take 'an offer I can't refuse' to pry my grimy hands from my 2B.
Nothing like that Great Drake Sound!
73 from satellite flyover country :-(
Steve Smith WB6TNL
"Snort Rosin"
I really like the calibrator for the analog display. I wish my cheap Radio Shack DX-100 had had this! The audio sounded nice even in the YT video.
ReplyDeleteWhat a gorgeous radio. I want!!
ReplyDelete