Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, April 9, 2022

WD-40, a Hard Drive, a Coat-Hanger Antenna, Dumpster Diving, and Amateur Radio Satellites from the Azores

 

Last month I was talking to Ira VP2EIH on my new 1712 SSB rig.  Ira is interested in satellites.  Talking to him caused me to dig up some old material about satellite operations.   Here is a 2003 QST article about working the satellites from the Azores: 


Regarding the usefulness of WD-40, during my time in the Azores John EI7BA once told me that WD-40 is, "the Pope's pee!"  Apparently that is high praise in Ireland.  It is indeed good stuff. 

Messias CU2BJ is a Silent Key.  I hope Ray CU3GC, WL7CDK is doing well.  

1 comment:

  1. I think even the Pope would argue his pee has already served its only real purpose: to remove unwanted substances from the body. WD-40 is useful for that purpose as well--it's pretty good at dissolving and blasting away dirt and grease from tools, hardware, or small mechanisms. That's no doubt why it worked to get your hard-drive spinning again. As a lubricant, though, it is deeply flawed.

    If you have nothing else at hand, it can also substitute as an penetrating rust buster. The purpose its developers intended is coded in the name itself: "WD" stands for water displacement, and its very good at doing that. It's not so good at many of the other uses to which it's commonly put.

    A very-long time ago, I worked at a company that made its own PCBs, and they had some very-precise NC machinery (programmed with punched tape in those days) for drilling and routing the boards. After a series of baffling and costly shutdowns, the culprit was discovered and WD-40 was banned entirely from the plant. The plant-maintenance guy and janitors couldn't even have any.

    It was found that once completely dry, the oils and waxes in it would slowly polymerize (as they were intended), leaving behind a sticky film that protected from moisture and rust just fine, but it gummed up precision machinery. The Chief Production engineer (my father) got the company brass to ban WD-40 entirely.

    Why ban it from even plant-maintenance and janitorial work? Because you couldn't keep the PCB-production crew from resorting to it in a "crisis" if they could find any at all in the building. It meant they weren't careful enough to keep the proper lubricants in stock. You could either fire them for their shade-tree-mechanic mentality, or you could ban WD-40.

    Needless to say, I've kept my congenital anti-WD-40 animus alive all these years, but I do have a can I use for cleaning and water-displacement purposes. When tempted to use it otherwise, though, the memory of my father sniffing the air suspiciously for its distinctive odor flashes in my head, and I reach for something else. --73, K7TFC

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column