Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, November 6, 2010

Homebrew Transistors!



None of those store-bought parts for Jeri Ellsworth! Once again she makes us all look like a bunch of pathetic appliance operators. I like the "harvesting of Germanium" from a 1N34. And I found very interesting her comment about "early hobbyists" cracking open 1N34's and turning them into transistors by adding phosphor-bronze collectors.

This all makes me want to fire up my Fool's Gold crystal radio. WFAX is right down the road...

BTW: I'm very pleased to report that Jeri is currently reading "SolderSmoke -- Global Adventures in Wireless Electronics." I hope she likes it. She definitely has "The Knack."

SolderSmoke Podcast 127 is almost ready.

Saturday, October 30, 2010

Back on the air with QRSS QRPp

I dusted off the old G0UPL QRSS QRPP FSK 30 meter transmitter (built and last used in Italy) and hooked it up to about 50 feet of AC line cord stretched low across the new Northern Virginia backyard. I hooked it up to my Kempton Park power supply (thanks for the chip Tony!) and fired up my freq counter (also from Kempton Park -- remember the chip I soldered in backwards?) I put a field strength meter next to the wire and tuned my L network for max smoke. Hey, and it worked! My signal is the wavy shark fin-looking thing. I think the wave results from a temp drop in the shack that happened when I opened the door. Just to confirm it was me, I turned the transmitter off for a few minutes. You can see me disappear from W1BW's screen.

Its good to be once again emitting EM waves!

Friday, October 29, 2010

Happy Halloween! 20% off SolderSmoke

I hope to have a new podcast out soon, perhaps a Halloween edition. Lulu is offering 20% off on SolderSmoke -- The Book. Just use the coupon code: TRICK305

Monday, October 18, 2010

Linux makes you younger! "Aha! moments"

Listeners seem to like the audio quality of SolderSmoke episode #126. I was surprised by this because I didn't do any of the post-recording processing that I'd done in earlier episodes. I didn't even have the foam "Popping P Protector" on the mic. And the equalizer that Brent sent hasn't been put in service yet. The improved audio may simply be the result of broader bandwidth -- I didn't use the Audacity equalizer to drop off the lows and highs. Perhaps that explains why the file was over 40 MB instead of the normal 20 MB. Several listeners said that I sounded 10 years younger in 126 -- it must be a Linux thing.

Chris KJ4GUU posted a nice comment about my book "SolderSmoke -- Global Adventures in Wireless Electronics" (which he calls SSGAWE):

"I have started reading I have started reading SSGAWE again. Whenever I have a question about a project I can usually find help in your book, its becoming more of a cherished reference guide that has produced more Ah-ha! moments than any other book I own. Thanks again!"

Thanks Chris -- those "Ah-ha! moments" were what I was hoping to produce.

For more info on the book, go here:
http://soldersmoke.com/book.htm

Wednesday, October 13, 2010

RSS, Time Signal, Miners...

I was very pleased to send SolderSmoke 126 out yesterday. There are some bugs to be worked out. The audio -- as always -- could use some improvement. (Any comments on how the audio in 126 compares with the 120-125?)

I tried to update the RSS feed this morning -- please let me know if it works properly.

Several listeners have already identified the time Spanish language time signal I've been hearing on 75 meters: HD2IOA in Guayaquil, Ecuador.

Great to see the Chilean miners coming up out of the mine this morning!

Tuesday, October 12, 2010

SolderSmoke IS BACK: #126

October 11, 2010
SolderSmoke returns!
Shack #7: The New Shack
Drake 2-B inhaling RF
Listening to 75 AM and SSB: WA1HLR, KM1A
Time signal on 3820 +/-?
Repairing DaVinci Code QRSS rig
UK test gear works fine on this side of pond!
Computer woes: First Linux SolderSmoke
Astronomy from inside the Beltway
Winter SPRAT: Great info, philosophy, inspiration
Charging up solar cells
Inbound Boatanchors: DX-40, DX-60, HQ-100, HA-600(A), HT-37
MAILBAG
-

Saturday, October 9, 2010

Update, Columbus Day


OK, the Drake 2-B is running. I'm listening to 75 meter SSB. Coffee is on. Solder has been melted in the new shack -- I had to replace the MPF-102 in my little DaVinci Code beacon MEPT 30 meter transmitter. Little by little, SolderSmoke HQ is coming back together, this time in Northern Virginia.

Lulu reports a big holiday weekend sale: 14.92 percent off this weekend only. Just put the EXPLORE305 code in when checking out.
http://www.soldersmoke.com/book.htm

Monday, September 27, 2010

SolderSmokeStatus

I've been getting some increasingly desperate messages about SolderSmoke withdrawal symptoms so I thought I'd better send out a status report. Also, one listener wrote in addressing me as "The Grand Poobah of the SolderSmoke Brotherhood." Wow, with a title like that, I better get going with the podcasts!

Most of the stuff is in the shack. The workbench is assembled. I'm trying to set up for both 220 and 110 (lots of Euro gear accumulated over the last ten years!) Surprisingly, Home Depot doesn't sell 110 to 220 transformers. And I live in an area where LOTS of people move back and forth across the pond. I may have to press my old autotransformer into service.

Most of my really old gear -- the stuff that went into storage over the last decade -- should show up in a week or so. This means my HT-37, DX-40, DX-60, Lafayette HA-600 etc. will be reappearing on the scene.

I hope to get some beacons (uh, I mean MEPTs!) on the air soon.

Unfortunately my ancient computer gave up the ghost during the trip. Hard drive is making scary noises. This will slow down the podcast as I have trouble putting it together with Linux only (which is what I'm operating with now -- thanks Jorge! Without your help I'd be completely off the net) Anyone have any version of Windows I could legally use?

But the Drake 2-B is doing fine. I'm listening to 75 SSB as I type.

Hang in there loyal listeners. Perhaps some of that nicotine gum would help. Or, better, some REAL solder smoke.

73 from the GP

Bill

Sunday, September 19, 2010

Climbing a REALLY tall tower

No thanks, I think I'll stick to tree-supported dipoles.

http://www.ebaumsworld.com/video/watch/81100181/

Thanks to Brent, KD0GLS for sending along this really scary video.

Saturday, September 18, 2010

Getting Settled -- Slowly. Yogi Berra on Theory and Practice

I've been getting some "Are you alive?" inquiries from SolderSmoke fans. I'm happy to report that, yes, I am still around, and doing fairly well. This move back to the states has been a bit more difficult and complicated than previous transfers, but slowly the shack is starting to come
together. Moat important: The Drake 2-B survived the journey!

It may take me a few weeks to start emitting whistling S sounds and Gong noises ("Wow, that's awesome!') but hang in there, new SolderSmoke episodes are on the way.

Meanwhile, I wanted to share with you a Yogi Berra quote sent to me by Brent, KD0GLS. I think this is especially appropriate because my grandfather actually played for the New York Yankees:

"As I make my way through the back episodes of SolderSmoke at a stately pace and hear you speak of Bletchley Park, I'm also reading "Secrets & Lies" by Bruce Schneier, renowned cryptographer and internet security expert. In his book, I read this timeless quote that immediately made me think of our hobby:

"In theory there is no difference between theory and practice. In practice there is."
Yogi Berra"

Thanks Brent! Thanks Yogi!

Sunday, August 8, 2010

A confession

Well, I didn't actually do it, but I thought about it. As the date of our departure from Italy approached, I was -- as readers and listeners will remember -- getting deeper and deeper into minimalist QRSS beacons. During the final weeks I was running my 15 mW Hans Summers-inspired varactor-modulated FSK transmitter from our country location up in the Sabine Hills. I had it running off one of my Volkswagen solar panels. I knew that the owner of the olive grove wouldn't mind if I left my nearly-invisible doublet antenna in the trees... You guys see where I was going with this. I came close to leaving that thing on the air. Sometimes I kind of wish I had. It would have been fun. But the QRSS beacons already seemed to be pushing the regulatory envelope a bit, so the solar panel and the beacon board went into the shipping container. I hope they will soon be radiating from Northern Virginia...

All OK here. We are getting settled. Our stuff should be arriving in the USA next week. We may have a new podcast out by early September.

We are still in a temporary apartment. This week Billy and I visited the local hardware store and got some very thin magnet wire. I have about 50 feet of it going from the balcony to a tree. As I type I'm listening to SSB net activity on 40 meters with my little Sony portable receiver. Man, that recent Coronal Mass Ejection really seems to have messed up propagation. But hopefully it is an indication that Ole' Sol is coming back to life.

Saturday, July 31, 2010

From Italy to Virginia: Move update

We're still in a temporary apartment, waiting to move into our new place. The new QTH has some good tall trees suitable for wire antenna support. I have my eye on a room for the shack.

Not much radio activity this summer. I do have my Sony shortwave receiver with me -- I've been listening to 75 meter AM. My Heathkit VF-1/DX60 combo will be coming out of storage, so I may soon be joining in.

My kids got I-phones and are having a lot of fun with them. As we drive along they are in multimedia contact with friends back in Italy (and elsewhere), texting, e-mailing, Facebooking, video-texting, etc. The I-phone 4 is an amazing piece of gear.

Summer reading: I kind of got bogged down in "Is God a Mathematician?" by Mario Livio. Good book, but as he gets deeper into it you really need to focus -- I'll get back to that when things settle down. I'm currently reading "Why does E=MC^2"by Brian Cox and Jeff Forshaw. I was attracted to the book because it promises to discuss the role of special relativity in things like toroidal tranformers. (There is a section called "Einstein in the Transformer in SolderSmoke -- The Book.") I like the authors' approach to math: they actually explain where the formula for gamma in special relativity comes from.

"Wired" looks at Radio Shack

Art, KG6ZWD, sent this link to me. Looks like Wired magazine has an interesting article about Radio Shack.

http://blakegonzales.com/2010/06/30/growing-up-with-radioshack/

I always liked these stores. They were never perfectly aligned with our needs, and they seem to be drifting even further away, but over the years I picked up lots of good gear and needed parts at these stores. Ideas too! I have those "Mini Notebooks" by Forrest Mims. Great stuff!

Wednesday, July 28, 2010

Modular Magic from AK2B

http://www.youtube.com/watch?v=mrDYEbRGEds

This video really made me yearn for my shack and soldering iron (all my gear is still on the high seas). OM AK2B is doing amazing modular things in an apartment in NYC. Richard Fenynman would be proud! I was pleased to see the circuits and kits of so many FB radio amateurs (including KD1JV, W7ZOI, and KA7EXM) in this rig. Thanks to Jonathan-san, KC7FYS, for sending this video to me.

Save 20% on SolderSmoke -- The Book

Lulu just announced a big summer sale, good through August 1. This is a good chance to get "SolderSmoke -- The Book" in time for that late-summer beach trip. Just use the coupon code SANTA when checking out. (U.S. buyers may find it more advantageous to use the summer-long free shipping offer.)

Find the book here:

http://soldersmoke.com/book.htm

Thursday, July 22, 2010

Back in Northern Virginia, SUMMER SALES

It seems like I have personally moved back several chapters in "SolderSmoke -- The Book." After being away for 10 years, we are back in the same part of Northern Virginia that we lived in before. The SS Shack is still out at sea -- it is due in sometime next month. We should be settled by early September.

The "free shipping"offer for the SolderSmoke book is still in effect. That is for shipment in the U.S. only, but buyers elsewhere can take advantage of a special 15% off option by using coupon code BEACHREAD305 on the U.S. version of the book.

I hope everyone in the Northern Hemisphere is having a good summer, and that our "down under" listeners are having an easy winter.

73 Bill

Wednesday, July 7, 2010

The Future of SolderSmoke

We're now in Santo Domingo, Dominican Republic, visiting my wife's family.

I've had some time to think about the future of the podcast. There will have to be a summer pause -- my shack is now in a bunch of boxes, out in the Atlantic ocean somewhere (hopefully above the surface!).

I want to use the move to improve the podcast and the associated blog and websites. Here are some initial ideas:

-- Reaching out to a broader community of Knack victims. It would be good thing could use the podcast to pull in guys who are solder melters, but who are not (yet) hardcore QRP homebrewers.

-- Better audio. I need a real microphone. Maybe a simple equalizer. I need to REALLY get rid of the SSSSSS problem.

-- Easier-to-use software. I'm still using the collection of software that Mike, KL7R, and I threw together five years ago. It all starts with Audacity (which works very well). But then for updating the website I'm using an OLD version of Mozilla composer. Updating the .rss feed is even more rickety -- I manually go in and change the text using Microsoft's notepad. There has to be an easier way of doing all this.

-- Self-hosted blog. I'm currently using Google's Blogspot to host the blog. But I see some advantages in moving to a self-hosted blog. I'd like to have a better comment/dialog feature, something more like the discussion board on the "AM Window" and other similar blogs.

-- More video. Don't worry. I'll stick with the audio podcast. But video is fun and useful, so I want to try to do more videos.

-- More guests on the show. I often say this, but in practice doing this makes it a lot harder to do a podcast. But maybe this will get easier now that I'm in the East Coast time zone.

Let me know what you think. 73 from Santo Domingo

Sunday, July 4, 2010

Miami SolderSmoke

The family and I are now in Miami. We departed Rome on Thursday, made a quick visit to San Diego (to see my brother and his family) and are now in beautiful Miami, right on Biscayne Bay. We'll be here for a few days. No radio activity to speak of -- the move kept me quite busy. But I picked up a good book at the airport -- "Is God A Mathematician?" by Mario Livio. It provides a lot of useful info on some of the math-in-electronics issues that we talk about on the podcast and in SolderSmoke -- The Book.

It was hard to leave Rome, but we are happy to be back in the USA on the the 4th of July. We'll watch the fireworks tonight.

Friday, June 25, 2010

Homebrew Fusion Reactor in New York City

Not really a QRP project (the goal of course is definitely QRO) but Knack victims will find this article and the associated video interesting. We've covered homebrew fusion before. This fellow is the 38th successful "amateur fusor" in the world. Go Brooklyn!

http://news.bbc.co.uk/2/hi/world/us_and_canada/10385853.stm

Monday, June 21, 2010

New Sci-Fi Show: Pioneer One



Not bad, especially for a $6000 budget! You can watch it free on You Tube. Here is part one.

Sunday, June 20, 2010

SolderSmoke is Moving the Markets!

Hi Bill,

I was at the East Suffolk Wireless Revival yesterday (Sunday) morning – hardly FDIM, but still a nice little flea market / boot sale, maybe 20 / 25 people selling odds and ends from SMD components to rigs and other bits of kit. Finished up in a bit of a good natured scrum fighting over variable capacitors made all the more desirable for having proper shafts and being made of something other than plastic.

Your name came up as being the inspiration for a resurgence in home building and the subsequent rise in prices of desirable bits as they became scarce as more people wised up to the fun of building and the ease of just melting solder straight on to the PCB rather than trying to etch something. Rather suspect that your podcasts and that book are actually being more influential than you realise. Read my copy lying on the beach in Antigua, but still keep going back to it, and as you have said in the past, the rest of the library – it’s making a very pleasant change from the Masters that I’m buried in at the moment.

Bought the UK equivalent of a Harbor Freight punch over a few days back, so can now make my own little round pads out of old PCB – magical !!

Good luck with the move – I was brought up on a prison farm in Tanzania amongst other places, so recall all too well that strange sense of loss when you leave a country for pastures anew. Lovely to hear Maria sounding so Italian – picking up another language at that age is a wonderful thing to have done and will no doubt stand both her and Billy in good stead over the years. I still manage a little Swahili after 50 years, including teaching my last 2 dogs a few commands which is always funny.

Looking forward to the next podcast – they have become an important little interlude in my life and keep my interest in amateur radio invigorated

All the best

Nick

Saturday, June 19, 2010

Thomas Edison, On the Air



There is an interesting technical story about how this was recorded, and how the recording was recently recovered:

http://www.timesunion.com/AspStories/story.asp?storyID=942480

Friday, June 18, 2010

"100 Feet Up In A Pine Tree, Soldering Iron Clinched In His Teeth"

Radio Guys at University of Virginia, 1966

Hi Bill.

I emailed you once to the Yahoo! address, but thought I'd send an updated email to your soldersmoke address, in a desperate attempt to be mentioned in the gonging "SolderSmoke Mailbag"!

I learned of the podcast at May's Hamvention. I wish I had known of the Four Days in May event, but this was the first Dayton I've ever been to.

I thought I'd mention that the ham club I'm involved with here in central Virginia, the University of Virginia club, is putting together a rhombic antenna out in the woods. Although more sweat (and hornet stings) than solder smoke is expected to come from this effort, I still thought it would be worthy of note within the realm of homebrew activity. I hope to have some photographs from our slingshot-and-fishing-line event. With a large crop of able-bodied 20-somethings at our disposal, we should be able to get this thing put together in short order (one of our new members even has extensive tree-climbing skills and a battery-powered soldering iron! If I can get a shot of him 100ft up a pine with the iron in his teeth, I will be sure to pass along). It is hoped that our new monster antenna will help us compete with our cross-state rivals, the Hokies of Virginia Tech. I will be sure to sacrifice a few chickens to Papa Legba prior to our outing.

There are definitely still young people interested in homebrew radio and I work everyday alongside many victims of "The Knack". I'm working on spreading the SolderSmoke gospel to as many of them as possible, and letting them know of our library of "Sacred Texts": EMRFD, Solid State Design, and Electronics of Radio, among others. And of course, some of our "Prophets" of the faith: Ashhar Farhan, the Haywards, and the late Doug DeMaw.

I also wanted to say that since I have a lengthy commute to and from the university, I've been listening to ALL of the soldersmoke podcasts, starting from the first one. I'm up to the summer of 2007 now. I found it very sad to hear of Mike KL7R's death in Jan 2007 and I find that I do miss the back and forth banter the two of your shared on the podcasts. However, it is still a lot of fun to listen to and I've kept a small logbook of ideas from the episodes, building up a list of projects I hope to soon embark upon.

Best 73 and thank you for your podcasts.

Bert WF7I

Wednesday, June 16, 2010

The Last Roman Rig: New WSPR DSB Transceiver

They are coming to pack up my soldering iron next week, so I'm afraid this will be my last Roman creation. You can see the W3PM Colpitts oscillator in the center. The KA7EXM AF amp is in the lower left. The Softrock-based Manhattanized PA is in the upper right. To the right of the oscillator is a classic W1FB two diode balanced modulator. You see three big green relays. The top one switches the antenna and 12 volts during T/R switching. The middle one switches the audio amp input, the bottom one switches the audio amp output. (I use the same AF amp for receive and transmit, just switching around the input and output.)

It works fine and has sent and received WSPR sigs. I think it will also do PSK-31 with the FLDIGI program. I could use a one more stage of RF amplification between the balanced modulator and the PA driver amp. Also, the AF impedance match between the KA7EXM amp and the balanced modulator nees work: Roger's circuit was deisgned to drive high impedance phones. That balanced modulator circuit has about 50 ohms at each port. Ideas?

I was thinking of calling it the Achilles. But I think I will go with "L'Aquilone" (The Kite").

Monday, June 14, 2010

Above Board: Manhattan-izing an SMT kit

A while back, Tony Parks very kindly sent me one of his wonderful Softrock RXTX V6.3 Software Defined Radio kits. I took a shot at it, but it turns out that I'm not very good with surface mount construction using small parts. I've gotten very used to the Manhattan style. Still, I did manage to build one of the Power Amplifier modules, and I put it to good use in a DSB WSPR transceiver I've been building (see above) . It worked great. For a while... Then it released some smoke.

I started trouble shooting and it was at this point that I REALLY began to miss good ole' Manhattan (you see, I was born there, and I went to Manhattan College, so I guess this helps explain the affinity). It was difficult to get to components mounted under the board. The whole thing was the size of my thumb... I know, whine, whine, whine... Luddite Geezer-ism strikes again. SPARK FOREVER!

It turns out that the problem was caused by the fact that my shack is just not well suited for this kind of construction. There is a lot of stuff floating around. Conductive stuff. Look closely at the picture below and you will see what I mean. You will see what caused the release of the smoke. Look at the leads on the PA transistor on the left. That's a little bit of stray wire that found its way to the WRONG place. Note the toasted source resistor just below!

Anyway, after a trying to fix this thing, I finally gave up and decided to use the circuit, but in Manhattan form. Everything up top. No SMT. Bigger coil cores. The temperature sensing circuitry went off to the right. The output transformer went off to the left, and the driver stage went down below the kit's board. Here is what it looks like now. Again, it works great.

I want to thank Tony and the Softrock guys for giving me this experience. Their kits are wonderful and are really making a tremendous contribution to the hobby. I strongly recommend them. The instructions are great, much like those of the old Heathkits. But for me, I'll take Manhattan.

Saturday, June 12, 2010

SolderSmoke Podcast #125 -- SPECIAL FDIM EDITION


http://soldersmoke.com

Special Four Days In May Edition!
Opening music: FDIM Bluegrass
Our last (sniff) Italy Travel Report
Snakes and Fireflies in Lazio
G3ROO's Antenna Book
Davinci beacon crosses the pond
WSPR rig repaired
New transceiver built for 30 meter digi
Manhattan-izing an SMT board
Paul Harden's wonderful book
BOB CRANE'S FDIM INTERVIEWS!
"Muntzing" with Michael, G3RJV's "Socketry"
Meeting Andrea IW0HK in Piazza San Cosimato!
MAILBAG: Including mail from Farhan, Roger Hayward and Ade Weiss

Monday, June 7, 2010

OH NO! UVB-76 Goes Off the Air! Duck and Cover!

From Wikipedia:

UVB-76 is the callsign of a shortwave radio station that usually broadcasts on the frequency 4625 kHz (AM full carrier). It's known among radio listeners by the nickname The Buzzer. It features a short, monotonous About this sound buzz tone , repeating at a rate of approximately 25 tones per minute, for 24 hours per day. The station has been observed since around 1982.[1] On rare occasions, the buzzer signal is interrupted and a voice transmission in Russian takes place. Only three to four such events have been noted. Despite much speculation, the actual purpose of this station remains unknown. On June 5, 2010, UVB-76 stopped transmission suddenly, the first time there is no signal received from UVB-76 since 1982. [2]

http://en.wikipedia.org/wiki/UVB-76

Sunday, June 6, 2010

The Amateur Scientist, Trivial Motors, Influential Books...


I got a nice e-mail from Keith, VE3TZF, that got me thinking about "The Amateur Scientist" by C.L. Strong. The Wiki article on this book is very interesting:
http://en.wikipedia.org/wiki/The_Amateur_Scientist
Check out the part about Forrest Mims.

Here's Keith's e-mail:

----
Hello again Bill,

In your podcast you frequently make reference to the book, The Amateur Scientist.

This got me thinking back to what REALLY got me started along the path of building stuff for fun.

There were three books I remember reading over and over, even though at the time I had a very hard time really understanding what was on all of those pages. Those books were:

1. 'Codes, Ciphers, and Secret Writing', by Martin Gardner (unfortunately, he recently passed away).
2. Some type of 'build yourself a science laboratory' book.
3. Some type of 'build electric motors' book.

I explicitly remember that one of the tasks in the 'science laboratory' book was to take a burnt out light bulb, etch around the neck, break it off, and turn it into a flask. The flask was supposed to sit on a stand that you already made out of wire (a coat hanger?). I've been trying all sorts keyword searches in Google to fine the name of the book. I'm sure I would recognize it if I saw it. Is this 'The Amateur Scientist'? The closest I have gotten is "Build-it-yourself science laboratory: work like a scientist: build your own equipment, make real findings" by the Oregon Museum of Science and Industry. I'm still looking...

On the other hand, when you described the trivial electric motor, something twigged in my memory. I've built one of those! Many of those in fact! Decades ago! The 'electric motor' book made reference to 3 basic designs. They were called the 'mini', the 'midi', and the 'maxi'. The 'mini' motor was in fact the trivial electric motor. The 'midi' motor used fixed magnets on the armature, and the 'maxi' motor used electromagnets only. I remember salvaging an old wooden pencil box, and stealing some of my mom's knitting needles, to build the 'maxi' motor. I used a 6 volt lantern battery to power it. It worked extremely well, but got incredibly hot! And the sparks! I had not yet learned about volts, amps, and watts. Also at the time I was too young to get the mini/midi/maxi references to womens' skirts.

After a little searching with Google, I hit the jackpot:

* "How to make and use electric motors", Al G. Renner - 1974
* Text and diagrams give instructions for building the mini, midi, and maxi motors and for performing various experiments.

Now I just have to find a copy.

I'm currently spending a lot of time with my nephew, building blinking LED circuits, buzzers, motors, and listening to Morse code. He's really getting into it, and I KNOW that this is important.

I just wanted you to know that your podcast (and excellent book) have far reaching impacts that you may have never intended.

-Keith Robert Murray VE3 TZF

Tuesday, June 1, 2010

YouTube meets QRSS



They seem like two very different technologies, right? They are certainly at opposite ends of the speed spectrum. But David, EA1FAQ, has made innovative use of YouTube video to present -- in a very useful form -- the signals received by his QRSS grabber over a three day period. This kind of system brings to to visual QRSS a bit of the retrivabililty that makes WSPR so useful and interesting.

David's test period happened to include the time that I was out at our country place with my 3 mW QRSS beacon. Back in Rome I could indeed see my sigs in David's video. He was kind enough to follow up with the actual shanpshot of my signal crossing the Med:

Saturday, May 29, 2010

G3ROO's AMAZING Antenna Book

A few years back Ian Keyser, G3ROO, put together a really wonderful antenna book. It is very "down to earth," very practical, very useful for hams seeking to succeed with homebrew antennas. The book was edited by another great person from G-QRP Club -- Tony Fishpool, G4WIF. It has been out of print, but Ian has just made it available through Lulu.com.

Lulu is the printer who also handles my book: "SolderSmoke -- Global Adventures in Wireless Electronics." This means that you can order both books at the same time, perhaps saving on shipping costs. (But remember, for U.S., buyers shipping is free all summer long. ) And there is a 10 percent off sale for all buyers during the month of May (Coupon Code: FLOWERS).

Check out Ian's book here:
http://www.lulu.com/product/paperback/practical-and-tested-aerial-systems/10904725

For more info on the SolderSmoke book, go here:
http://soldersmoke.com/book.htm

Friday, May 28, 2010

Spotting the X-37B Mystery Space Plane

I thought it was kind of cool that the amateur satellite spotting community has been able to locate and determine the orbit of the X-37B. Heavens Above will tell you where and when to look for it. Space Weather has some nice images and videos. It is all a bit reminiscent of The Kettering Group. Go Space Sleuths!

Wednesday, May 26, 2010

Special on Book: 20% off TODAY only

Andrew, G4CWX, reminded me that the folks at Lulu are having a 20% off sale. Today only. So you can save a lot on SolderSmoke -- The Book. The coupon code is THANKS305.
U.S. buyers might be better off using the free shipping option, but this 20 percent sale will definitely be a good deal for everyone else. http://soldersmoke.com/book.htm

Monday, May 24, 2010

Portuguese Knack: Balloon Launch May 30

I don't think they are radio amateurs, but these guys seem to have The Knack. That's an edge-of-space balloon payload they built. They plan to launch on May 31. You will be able to follow the event live, on-line. They have a very interesting web site: http://spacebits.eu/




DaVinci Milliwatt Beacon Crosses the Pond

We were out in the country this weekend and I brought along the little DaVinci 10 milliwatt QRSS beacon. I was hoping that it would do better with the big dipole that I have out there (vs. the sub-optimal end-fed wire I use here in Rome). Success! Bill, W4HBK, saw the above image on his screen in Pensacola, Florida on Saturday evening. My signal is the little bumpy line just below the Morse signal. Joachim, PA1GSJ, also saw it, and passed along this image:

Friday, May 21, 2010

Better than EE text books! With Free Shipping and 10 % off

I was feeling kind of bad about the fact that while free shipping for the book is available for readers in the U.S., people from other countries are not eligible. But Lulu came through! During May readers everywhere can get 10 percent off by using the coupon code FLOWERS. Lulu won't let you combine free shipping AND the 10 percent off; U.S. customers are probably better off sticking with the free shipping. Customers from other countries can use the 10% discount during May.

Steve, KC2VNI, sent in some nice comments on the book:
---------------------------

I am an electrical engineer and I will say that the way Bill explains things is far, far, better than what I've seen in most books dealing with either communications theory or with communications electronics.

Not to go on a rant, but the college level electrical engineering text books are very poorly thought out and are really not written for the beginner (even an undergraduate electrical engineering student) who does not share the author's years of insight.

I would recommend that people who read the book should post comments about it where hams will find it. I posted comments on E-Ham. I will probably post to Ham Radio nation.

Several tweaks to the book (with the understanding that my comments are NOT meant as a slam on the book nor am I an electronics expert):

1) Give me a more detailed troubleshooting methodology- The literature associated with testing and troubleshooting is very,very limited.
A flow chart or diagram of some sort would be very helpful. I get the impression that Bill's efforts in this area were "cut and try" because of his obvious enthusiasm. Having said this, the beginning home-brewer has NO IDEA as to what he needs in the way of test equipment, what he should look for when testing a circuit, what the wave forms should look like, etc. (Note from Bill: A detailed discussion on troubleshooting methodology would be very helpful to students taking electrical engineering online.)

2)Very little discussions about the more mundane things like power supplies, connectors and the like. These trivial items can cause you hours of frustration if you don't think this through. If you want to string things together on a bench, I suppose it does not make difference. However, if you want to operate say QRP mobile in the woods then you need something that has a little bit of thought.

3) Very little discussion about heat sinks and thermal management- This is one of the most neglected areas for most people in electronics (and not just the homebrewer of radio equipment). Here, I recommend the ASME text "Hot Air Rises and Heat Sinks: Everything You Know About Cooling Electronics is Wrong". When I read the discussion about a transistor running hot and extra heat sink compound being applied in the book, I wanted to scream!

One other thing-is there any way I can get an autographed copy of the text?

Thank You very much for this very fun book

73

Steve KC2VNI

Thursday, May 20, 2010

Muntzing with Michael


Snappy title, don't you think? I think it could become a TV series, maybe if the Discovery channel someday gets into QRP and homebrew. In his QRP-L message about his latest rig, Michael, AA1TJ, said that he had "spent the morning 'Muntzing' G3XBM's, fine little XBM80-2
transceiver for the MAS (Minimal Arts Session) event." For those of you who don't recognize the verb "to Muntz", Michael is referring to one of the early manufacturers of TV sets, who, in an effort to reduce costs, ruthlessly went through his engineers' designs, throwing out every component that wasn't absolutely necessary. So I think Michael -- who I often refer to as the "Poet Laureate of QRP" -- has given us a new and very useful verb: To Muntz! (This comes in a month in which another very useful word was given to us: G3RJV's "socketry.")

Michael said, "I felt like the guy in the movies yesterday; throwing everything overboard that's not absolutely necessary in order to keep the Zeppelin/balloon aloft long enough to make landfall. :o)" The results speak for themselves. The schematic above and the picture below show Michael's entire transceiver. And he made a bunch of contacts with it.

One word of caution: Minimalist radio is not for the faint of heart. As the parts counts go down, the degree of difficulty for successful contacts goes up.

Check out Michael's page: http://www.aa1tj.com/Menos es MAS.html

Here's a picture of the rig:

Tuesday, May 18, 2010

YET ANOTHER HB DSB QRP WSPR Station! And more "inverted FSK"!

Paul, M0XPD, reports that he has joined the DSB revolution and has put a homebrew DOUBLE Sideband WSPR signal on the air. The rig is pictured above. So I can no longer claim to be the ONLY DSB WSPR station in the world. FB Paul. For more details go to Paul's site:
http://m0xpd.blogspot.com/2010/05/homebrewed-whispers.html

This was the second time in a week that I've found someone else doing the same nutty thing that I've been doing. The first incident involved G0XAR. I found him transmitting upside down FSK on 30 meters. Again, I am no longer alone...
Note that both of my colleagues in radio eccentricity are from Britain, a land that takes justifiable pride in its eccentric boffins!

Sunday, May 16, 2010

"It's all your fault!"

Lulu just announced free shipping on the book (to U.S. addresses only) for the whole summer. Starting now. But before you order, consider these words of warning from one reader:

Bill,

I just finished your Soldersmoke book. I really enjoyed it - but...

I got the radio and electronics bug a bit late and was 23 years old before I got my ham license. I was truly fascinated by it all. Then I started wanting to learn why it all worked. It was truly a challenge to start figuring out how electronic circuits work with nothing more than my average intellect and a few books. I strained my gray matter over the electrons and P and N type material. Finally I decided to ignore it and move on - just put the 'trons into the black box and pick them up on the other side. I eventually became proficient enough to build kits and do some basic troubleshooting. I had SSDRA and a bunch of stuff by Doug DeMaw, but never could get too deep into it. Eventually I had what I believe was a neat miss from lightning and station KC4GIA went silent for a number of years.
Then I found your podcast. I've really enjoyed it. I've slowly started getting back on the air. I've bought my old dream rigs (Drake Twins, B line) and built an ATS3B. But the urge to learn more and progress to the true homebrewer level has taken hold. It's all your fault. I blame you completely. I now have a copy of EMRFD, the latest ARRL Handbook, and even have started trying to figure out LTSpice. Ok, that's also the fault of the Hands On column in QST.
I do have to thank you for the excellent descriptions of the electrons moving through P and N material. I actually think I've got it now. Now if I can figure out all this biasing, and impedance matching, etc. I might get somewhere. Your description of how you have to match impedance through different stages makes sense, but I'm still fuzzy on how to determine the impedance in the 1st place, etc. I'm truly excited by the possibility of learning how to design circuits on my own rather than building by rote. Again - it's all your fault.
Back to the book. I really enjoyed the story of the 17M DSB rig you built in the Azores. It was like an adventure story. Very cool. I'm still a bit vague on why DSB, but you seem to like it, so whatever moves you my friend. I am also intrigued by the satellite contacts. I had always thought you had to spend a small fortune on an az-el rotating antenna array. I'm looking forward to trying it out with normal antennas. My only satellite contacts have been through RS-12 (I think that's the right number) using the 15 and 10 meter bands. I don't think there is anything out there using that mode any more.
I also find it fascinating that a guy who used to live a little over an hour from my QTH in Winchester, VA and is now halfway around the world has had such an impact on my enjoyment of the hobby. If you do end up back in the DC cesspool, I hope to get the chance to meet you.

Final thought - Audio Book! I'm used to you talking to me. There ought to be a way to sell a download or something. I think the book is awesome, and may even become a scribbled in resource at some point, but an audio version would be a good companion to the print version. Just a thought...

Thanks for the motivation. You've brought me back to what's fun in Amateur Radio - learning!

Mark
KC4GIA

Saturday, May 15, 2010

Physics, Math, and Futurama

My kids watch this show. Here's an interesting article about the writers and their science/math backgrounds:
http://www.aps.org/publications/apsnews/201005/profiles.cfm

Friday, May 14, 2010

The Death of a 2N3904: Captured on Grabber Video!

On Sunday I was working on my little DaVinci QRSS transmitter. I had it on, happily generating FSK on 30 meters. Then all of a sudden I noticed that power out had dropped to zero. I suspected a blown final transistor -- this was before the installation of my elegant Altoids smoke-stack heat sink, and the little 2N3904 I was using in the final was getting quite hot (it runs Class A). Almost instinctively, I turned to the ON5EX grabber. The image from Johan's receive system captured the final moment of that transistor. See that bright spot where the square wave ends? That's when the transistor blew. I tested the 2N3904 out of circuit: the base-collector junction is now completely open (no current in either direction). The death of this transistor may also have been related to the intermittently bad 4700 ohm resistor in the bias circuit. The 2n3904 has been replaced by a more robust 2N3053 sent to me by AA1TJ. It is protected by the Altoids smoke-stack heat sink (scroll down for schematics and an image).

Hope everyone is having fun at Dayton. I caught G3RJV's talk yesterday via streaming video. As always, inspiring stuff! And I really liked a word he used: socketry. You know, "the PC board, and the box will all the associated SOCKETRY."

Wednesday, May 12, 2010

Schematic for QRSS Transmitter

Here is the schematic for the little QRSS (visual) transmitter that is currently rockin' Europe's 30 meter band with an AWESOME 20 milliwatts of SLOOOW FSK. (As I type, it is 0415 UTC, 0615 local, and the first signs of my signal have just appeared on the ON5EX grabber up in Belgium.) The FSK modulation comes from Hans Summers' multivibrator circuit (see earlier posts).

It was a lot of fun to take this thing very quickly from LTSpice, to the workbench, then to the antenna, with Johan's grabber providing instant feedback. This started out as a one-stage Colpitts oscillator transmitter. But I needed more stability. Indeed, the separate oscillator with the source-follower buffer makes it much more stable. Before, any adjustment to the antenna tuner shifted the frequency. At one point I even suspected that wind blowing the antenna was shifting the frequency -- we are talking about a band that is 100 HERTZ wide, so even a few hz of instability is noticeable. But I find that crystal ovens and other extraordinary measures are not really necessary.

I had one unusual problem with this little rig: As I was doing my initial tests, I noticed that the output signal was sort of jumping up and down. The problem was in the PA. I isolated the problem to the base circuit. At first I thought that some small blob of solder was intermittently messing up the bias voltage (that's quite possible here in the N2CQR lab!). But no! It was that 4700 ohm resistor. It was bad, and kind of intermittently bad! I never had a resistor go south on me like this. It is an ordinary 1/4 resistor. It is not dissipating a lot of power.

I'll keep it around 10140010 today. Check it out on Johan's grabber:
http://www.on5ex.be/grabber/grabber.html
Look for a horizontal lines with little bumps (about 4-5 per minute). That's me.

Tuesday, May 11, 2010

The DaVinci Altoids LED 30 Meter Multi-vibrator MEPT Transmitter

Hey, check out the Altoids heat sink for the PA in my little 30 meter MEPT rig. Is this a new use for our beloved Altoids tins? I like the smoke-stack look.

This rig has evolved quite a bit. It started out as a frequency standard for QRSS and was mounted inside a paperback copy of Dan Brown's book. Then I matched the oscillator up with the multi-vibrator pattern generator from one of Hans Summers' rigs. This week I decided that I really needed a buffer and a PA -- I needed a bit more stability. I'll try to post a schematic tomorrow. In the meantime, watch for my little signal on the ON5EX grabber (off to the right). The pattern is small (3 Hz) bumps, about 4-5 per minute.

Saturday, May 8, 2010

First Transatlantic Transistorized QSO

1956. 80 mW on 20 meters. U.S. to Denmark. Above, the rig that did it.
The online Transistor Museum has a wonderful new article about this historic event, with details on the rig and the operators. Check it out:
http://semiconductormuseum.com/HistoricProfiles/Raytheon_TransAtlantic_Transmitter_Profile_Index.htm
Thanks to AA1TJ for alerting us to this.

The Limerick Revolution

On the last podcast I mentioned a new PC board technique being pioneered by Rex, W1REX, out of Limerick, Maine. The Limerick technique uses cool-looking black PC boards with pads for the components. (The picture above is the kit version of AA1TJ's famed Reggie receiver.) Connections between the pads are via PC board traces within the board. I like it because it seems to provide the big advantage of our beloved Manhattan technique: you have all the parts and connections topside. Check out Rex's fine line of kits: http://www.qrpme.com/

Today G-QRP club announced the release of a Limerick kit version of G3RJV's Sudden receiver.
Take a look at the final product and the boards:

Very nice. Read more about this wonderful kit here: http://www.gqrp.com/sudden.htm

Go Limerick! Go Sudden!

Thursday, May 6, 2010

QRSS LED FSK Experiments: More Blue vs. Red

On my little Colpitts/DaVinci/G0UPL less-than-10 mW QRSS rig, I started out with a forward biased (downward pointing) Superbright Blue LED (from AL7RV). (Refer to Hans' schematic, above.) You can see the resulting pattern below. That is my signal above that of Alan, VK2ZAY. At first I thought the diode was just switching in the 5 pf cap, but Hans (who knows this turf far better than I) thinks it is more of a varactor action. I now think it is a little of both: When that + 2.5 volts from the multivibrator hits the diode, it goes partially on (it even glows a bit). This puts the 5 pf cap into the circuit (through the resistance of the diode). The diode itself increases in capacitance because of the increased forward bias. As a result, the total capacitance increases, and the frequency drops a bit. Thus, forward-biased diodes result in upside down FSK. You can see a bit of the varactor action in the curve on the trailing edge of my not-so square waves -- I think that marks the period in which the voltage from the multivibrator is slowly rising:

Just to make Hans happy, I switched from a forward biased blue to a reverse biased (upward pointing) red diode. The resulting pattern (below) looks a lot like the pattern shown in the picture in Hans' excellent SPRAT article. This is clearly FSK. The positive voltage from the multivibrator increases revers bias on the LED, DECREASING capacitance and RAISING the oscillator frequency. In the curve of the leading endge of the pattern you can see the voltage from the multivibrator slowly rising. FSK here is "right side up."

Finally I tired a little 1N914 diode forward biased. I was hoping to see some cleaner switching action, but even with this little diode you can see quite a bit of varactor action at work:

I think the switiching would be a lot cleaner and more complete if the voltage from the multivibrator wasn't coming through a 1 meg resistor. But when you put a lower resistance in place of the 1 meg ohm part, you start to mess up the frequency of the multivibrator.

I have to say, my favorite pattern is that from the Blue diode forward biased. Sorry Hans. To each his own...
I'm guessing that AL7RV went to Michigan...

Thanks to Johan for the ON5EXcellent grabber which is visible over here>>>>>>>>>>>>>>>>>>>

Wednesday, May 5, 2010

Altoids to the Max!

Rogier, KJ6ETL, sent an interesting link to some inspirational projects involving Altoids tins:
http://blog.makezine.com/archive/altoids_and_tin_cases/ The first one that appears seems to belong somewhere else -- just scroll down to find the tins.

Wiki provides background info:

Altoids are a brand of breath mints that have existed since the turn of the 19th century. Altoids are less widely available in Britain—their country of origin—than in the regions to which they are exported, the standard peppermint mints being the only flavour available and only stocked in relatively few stores. Callard & Bowser-Suchard manufacture and produce Altoids at a plant in Bridgend, Wales, although Wrigley, the brand's owner, announced in mid 2005 they planned to move Altoids' production to an existing plant in Chattanooga, Tennessee, in order to manufacture its products closer to where they are sold.

The history of Altoids dates back to the reign of King George III. The brand was created by a London-based Smith & Company in the 1780s but eventually became part of the Callard & Bowser company in the 1800s. Their advertising slogan has been "The Original Celebrated Curiously Strong (insert flavour here) Mints" for a number of years, referring to the high concentration of peppermint oil used in the original flavour lozenge. The "Story of Altoids" text is printed on the paper liner inside certain tins.

---------------------------------------------------

One cautionary note: Apparently Altoids mints played a minor role in the Bill Clinton-Monica Lewinsky mess. We won't go into the technical details here, but suffice it to say that a collection of Altoids tins on your desk at work may raise some eyebrows among some of your colleagues.

Monday, May 3, 2010

Soldersmoke Podcast #124

That's Billy on the right
May 3, 2010
Oprah follow-up: On to Martha Stewart and Dr. Phil?
Fencing on a Roman piazza
Breaking an important cable
My WSPR Direct Conversion receiver
Roger Hayward's wonderful ugly AF amp circuit
The beauty of SBL mixers
My DaVinci Code Oscillator goes on the air!
Making my own 555 timer chip (sort of)
LEDs as varactors (or are they colorful switches?)
Black Holes in workshops -- is the LHC to blame?
Altoids: now made in TENNESSEE!
G3RJV's wonderful video
MAILBAG

Saturday, May 1, 2010

Down For Maintenance

Not the radio gear, not the blog, not the podcast. ME! All that running around in the fields of the Sabine Hills finally caught up with me. Last Sunday, while chasing a kite, I tripped and my foot moved in way that nature never intended it to. I popped (quite audibly!) my Achilles tendon. No big deal, but it did require some minor surgery and now I have a big cast on my foot that may cause me to spend additional time in the shack.

I hope to get the next podcast out as soon as I can. Maybe tomorrow. I will try to spare you all the gory details. Back to the radios! I've had a very interesting e-mail exchanges with Hans Summers G0UPL about LEDs as varactor diodes and their use in QRSS FSK systems. I'll talk about this in the next podcast.

Tuesday, April 27, 2010

Red vs. Blue. (Diodes)


Hans: Live and let live OM! Some people like their diodes up and red, others down and blue!

Any little diode would, of course, work as a switch, regardless of its possible varactor properties. When the diode is not conducting, that 5 pf cap in your SPRAT 134 circuit has one end floating. When the +2 volts comes in from the multivibrator, that little cap is fully across your 22 pf trimmer, and the frequency shifts.

I did some additional Googling this morning and found that Alan, VK2ZAY used this diode as a switch scheme in his early QRSS design. See:
http://www.vk2zay.net/article/180 Alan wrote "A small trimmer in the oscillator circuit is diode switched by the beacon controller to pull the oscillator an adjustable amount." (He later went RED on us with upward pointing varactors!)

I did the test you asked for (shorting out the diode). Before I shorted it out, my freq counter shows the transmitter shifting from 10140020 to around 10140030. Shorting out the diode with a bit of wire puts the freq at 10140010, and it stays there.

The switching scheme has a side benefit: You get a cool-looking LED that turns on and off with your keying.

73 Bill

--- On Mon, 4/26/10, Hans Summers wrote:

From: Hans Summers
Subject: Re: [Knightsqrss] FSK LEDs: Red or Blue, Switches or Varicaps?
To: "Bill Meara"
Cc: knightsqrss@cnts.be, "g3zjo"
Date: Monday, April 26, 2010, 1:18 PM
Hi Bill

Currently it's still offending my sense of correctness, having that
diode upside-down!

And also I'm still not convinced it's behaving as a switch.
Even when reversed (i.e. Forward biased), the diode can still show a
variable capacitance effect, seemingly.

Please can you try shorting the LED and tell me what FSK
that produced? 73 Hans

On 4/26/10, Bill Meara
wrote:
I'm thinking that both configurations might work:
Perhaps with Red LED working in reverse bias mode, the diode serves as a
varicap, with the voltage from the multivibrator varying the capacity
and causing the FSK. I guess we'd call this the "diode as varicap" mode.

In the configuration that I am using, (which I guess we could call the
"diode as a switch" mode) the diode is FORWARD biased
by the voltage from the multivibrator. Then that output terminal goes
positive (mine goes up to about 2.35 Volts), the diode conducts, and the 5 pf
cap is effectively added to the circuitry between the crystal and ground. And
the LED glows (even with current severely constrained by the 1 Meg
resistor between the multivibrator and the diode. When the voltage from
the multivibrator goes below around .6 volts, the diode stops conducting, and
that 5 pf cap is in effect taken out of the circuit.

You can see what I'm talking about in the hand-drawn
schematic here:
http://soldersmoke.blogspot.com/2008/10/i-shift-to-fsk-on-30-meter-qrss.html
This is from the QRSS rig I built back in 2008. You can see in this circuit
I use only 220 ohms between the keyer and the switiching cap.
I plan on putting a 220 ohm resistor in this latest rig (just to make the
blue diode glow brighter!)

One bit of kind of strange electronic serendipity: I turned Hans's diode
upside down, and used it as a switch. But the 5 pf cap that he had in his
original circuit was just right to produce an 8 Hz freq shift.

73 Bill
> >
On 4/25/10, Bill Meara
wrote:

Eddy: But Hans's circuit has it fed through
a 1 Meg resistor. So even if
it glows, that diode is QRP! 73 Bill

--- On Sun, 4/25/10, g3zjo
wrote:

From: g3zjo
Subject: [Knightsqrss] FW: New beacon
To: knightsqrss@cnts.be
Date: Sunday, April 25, 2010, 2:59 AM

Hi Hans, Bill/Group

Its funny how this simple subject can get confusing, brought about
sometimes by people (me) not caring which way up the LED is sketched in
a circuit, because when it comes to building we know what
to do. However sometimes I have seen the LED
deliberate forward biased for a 2
level code and used as a switch to merely
add the extra capacitance in
circuit.


For the QRPp purist though, you could get
around the world on the current that is flowing in the LED :-)

Eddie G3ZJO


-----Original Message-----
From: knightsqrss-bounces@cnts.be

[mailto:knightsqrss-bounces@cnts.be]
On Behalf Of Hans Summers
Sent: 24 April 2010 22:52
To: Bill Meara
Cc: Knightsqrss@cnts.be
Subject: Re: [Knightsqrss] New beacon

Hi Bill
Congrats on getting your multivibrator
working and the success on air!
One thing interested me particularly: not
the use of a blue LED
specifically, but that you mentioned
you'd seen actual light come out
of it? Really? That isn't supposed to
happen! Are you sure you have
the LED connected correctly? It is
supposed to be reverse biased.
Which would mean it shouldn't light up.
See my varicap diodes page
http://www.hanssummers.com/varicap .
On the other hand: there's a good
argument which I refer to daily,
which says: if it ain't broke don't fix
it. Diodes do seem to exhibit
a variable capacitance even when forward
biased, though this probably
has other undesirable side effects such
as lowering the Q.But that
won't matter much in this non-critical
application anyway.

73 de Hans G0UPL


On Thu, Apr 22, 2010 at 7:06 PM, Bill
Meara
wrote:

I just finished my version of Hans
Summers' ultra
simple QRSS beacon (I mean, uh, MEPT). I've been
discussing it on http://soldersmoke.blogspot.com

I got some instant gratification. My QRO
20mw rig was still making it
into Johan's grabber at around 1840
tonight. So I figured the new 10 mW
rig would also be visible. Sure enough --
there it was, rocking along at
10140030. Square wave FSK from an
astable multivibrator.
I confirmed it was me by turning it off at 1850. Right
on cue, it disappeared from the
ON5EX screen. Very cool.
I'll leave it on for awhile tonight,
but the band seems to be shutting
down. Please keep an eye out for it
tomorrow.

73 Bill I0/N2CQR

Sunday, April 25, 2010

Running into Alan, VK2ZAY, in Belgium

I first met Alan, VK2ZAY, years ago when his web site alerted Billy and me to the fascinating world of trivial electric motors. Over the years we seem to have bounced around in similar kinds of projects. Yesterday morning, our two QRSS signals sort of crashed into each other in Belgium, on the "grabber" of Johan, ON5EX. Alan was making the LONG trip on about 1.5 watts, with all kinds of cool and sophisticated modulation (including HELL). My sig was, in comparison, a local, and a crude local at that: just 10 mW with nothing but an FSK pattern. For few minutes there we were on exactly the same freq, so I shifted up by about 20 hertz (amazing how quickly we get used to making such TINY frequency changes!). The screen shot above shows the results.

Here is a shot of one version of Alan's constantly evolving QRSS rig.

Conditions aren't quite so good this morning. Alan's signal is visible on the ON5EX grabber, but mine is only very faintly and intermittently in there.

I included the photo from Alan's Twitter page, because I felt a bit guilty about the last picture we ran of him -- he was wearing a hat made of LED's!
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column