VK2BLQ's Beautiful uBITX in a Wooden Box

Now that, my friends, is a BEAUTIFUL uBITX.  Stephen VK2BLQ put that one together.  Peter VK2TPM helped him get the KD8CEC software into his Raduino (Stephen had trouble  getting it to compile on his Raspberry Pi).  

For me there is good news and bad news here.  The bad news is that I can no longer tell people that mine is the only "wooden box" rig that they will ever work.   The good news is that I am no longer alone. 

INTERVIEW: Four Days in May 2018 -- G0UPL Hans Summers talks to Bob Crane

Once again, our correspondent Bob Crane W8SX has gone to the Four Days in May event and has sent back some really great inteviews with those who made presentations there.  

First on the list was Hans Summers G0UPL.   Hans is a justifiably famous Homebrew Hero, and a member of the QRP Hall of Fame.   The latest of his many contributions to the hobby is his amazing QCX transceiver.  Like the BITX rigs, the QCX refutes the idea that hams need to spend kilobucks to get on the air with a decent rig.  Priced at around $50,  the QCX offers excellent performance.  And it comes with built in test gear:  the signal generator you need to align the rig COMES IN THE RIG!  FB Hans.  

I think it was Pete who noted that the price range for rigs like the QCX, the BITX, and the uBITX is in the $50 to $110 dollar range, meaning that "One hundred bucks is the new three thousand bucks."  We owe a lot gratitude to Hans and Farhan for this very positive paradigm shift. 

Listen here for Bob Crane's 2018 FDIM interview with Hans: 

http://soldersmoke.com/G0UPL-18.mp3

We all also owe a debt of gratitude to the QRP ARCI folks who did all the hard work that goes into organizing Four Days in May.  Special thanks to QRP ARCI Preston Douglas WJ2V, and to FDIM Chair Norm Schklar WA4ZXV.  FDIM is one of the most important events on the Homebrew/QRP calendar. 

More info on the QCX (and order yours) here:  https://qrp-labs.com/qcx.html

An Epic Evening on 40 Meters

I had a good night on 40 meters last night.   The Radio Gods were obviously with me.  

First I called CQ and VP2EIH on Anguilla responded.  Nice to start with a whiff of DX.  

Then Jason W5IPA called in and said he wanted to try out his uBITX! See the pictures below.  FB!  

Then I got a call from K5WDW on Hilton Head Island -- Dexter runs Collins gear from an ocean-front shack (see above).  Check out his QRZ page.  

Then WA4PUB called in.  Dave has been on the air since 1948 and was a student of legendary ham and radio astronomer John Kraus.  Dave has directional antennas on 40 -- when he switched the pattern he went from LOUD to barely detectable.  FB.  Check out Dave's homebrew rig below. 

Finally Gary W7DO joined us.  He has a big 4 Square on 40 that also has some really impressive directional properties.  See below for a look at his 80 meter 4 Square. 

TRGH

WA$PUB

W7DO 80 meter 4 Square

BITX Night on 7277: First N6ORS and then Canadian BITX Builders

 I was about an hour late for the Eastern time zone meet-up at 7 pm local on 7277 kHz Sunday night (my wife and I watch 60 Minutes at that hour). but I figured I could work some guys if I got on at 8 pm.  Sure enough, I was called by Keith N6ORS on his MIN-X rig.  I was on my QRO DIGI-TIA.  It was great to catch up with Keith. 

Then I got a call from VE3THR.  Last year I'd talked to Tom when he was using his BITX40.  This time he was on with his uBITX.  FB.   Tom's club in Barrie, Ontario is obviously melting a lot of solder and having a lot of fun.  Here are some pictures of their rigs. 

F5LVG's Nail Board Receiver -- Names for the Technique

Pete WB9FLW reminds us that Olivier F5LVG has LONG been using copper nails and wood boards to build amazing rigs.  See above for one magnificent example.  That, my friends, is a superhet receiver.  Inspirational! 

http://oernst.f5lvg.free.fr/rx/Super2016/RXSuper2016.html

http://oernst.f5lvg.free.fr/rx/Super2016/RXsuper2016En.html

http://www.stormwise.com/ampage1.htm

A few posts back we asked for nominations for the official name of this technique.   We still have to consult with Steve Silverman on this, but the nominations are: 

Armand WA1UQO (perhaps reflecting his proximity to Washingotn DC)  "Wire-Tapping" 

Gary Hinson:  "Coffin Dodging"  (sounds a bit dodgy to me). 

And the front runner so far, from Melbourne, Australia -- drum roll please: 

Peter Parker:  "NAILBOARDING."  (Peter thinks he nailed it with that one.  I tend to agree.)  

Youngest Homebrew Hero: 17 year-old Sam Zeelof Makes His Own Integrated Circuits

Seventeen year-old Sam Zeelof, KD2ENL, is making his own integrated circuits in his garage. 

Wow.  This makes me think about another seventeen year-old -- the fellow who appears on pages 63-64 of Cliff DeSoto's "200 Meters and Down." (I have the story on page 81 of "SolderSmoke -- Global Adventures in Wireless Electronics.")   In the early days of radio that kid amazed us by making his own vacuum tubes.  Sam Zeelof is clearly following in that tradition. 

No "mysterious black boxes" for Sam!  No "appliance chips" for him!  FB OM.  

This is really amazing.  Here are the links: 

https://spectrum.ieee.org/semiconductors/devices/the-high-school-student-whos-building-his-own-integrated-circuits

http://sam.zeloof.xyz/category/semiconductor/

One of Sam's chips

Thanks to Bruce KC1FSZ for alerting us to this amazing work. 

A Construction Technique that REALLY "Nails it" -- But what do we call it?

Thanks to Rogier PA1ZZ (long in W6) for this.  I guess I have used a variation of this technique in some antenna tuner projects, and maybe in a crystal radio effort.   This also reminded both Pete and me of the electronic project kits that we were given as kids.  Those kits had little springs that were supposed to keep the components in contact.  They might have worked better with nails.  

This technique definitely provides an opportunity for an earnest young guy to make use of his soldering GUN.  I don't think a wimpy 35 watt iron would be up to the task.  

See: http://www.stormwise.com/project10.htm

What should we call this technique?  We have "ugly" and "Manhattan" and
"Muppet Boards."   What do we call this? 

NN2K's Beautiful Pine-Board Al-Fresco Thermatron AM Transmitter

On Saturday mornings (around dawn) I often listen to the Old Military Radio Net on 3885 kHz.  I find it inspirational.  This morning the inspiration was provided by Rick NN2K.  His signal from Binghamton New York was makeing the trip to Northern Virginia.  When I heard him mention that he was using a "Pine Board Transmitter" I felt the urge to look for a picture.  QRZ.com provided the photo.  

Rich says he built this rig in January 2018 based on a QST article by Bob Heil.   FB Rich! 

And thanks to Ted W3PWW for running the Old Military Radio Net for so many years. 

KE4MIQ's Repurposed Raduino Receiver

FB James -- Really glad you are listening,  and that you are having fun with a Direct Conversion receiver --- souped up with a Raduino! 

Bill, Pete

Just listened to #204. (New Listener)

You talked about using the Raduino with other radios.

I bought one of Mike Hagen's RaduinoXs to use with my Bitx40. So, I have repurposed my original Raduino as a VFO for my 4SQRP ZZRX-40 DC receiver. I used Allards's v1.26 with a few code changes to tune 7.000 to 7.300. It's currently al fresco on a piece of Hobby Lobby foam board. I may "cabinetize" at some future date.

Attached is a pic of the ZZRX-40, Raduino, and Goodwill Sony speaker with Jameco stereo amp, all running off of Harbor Freight 9v Nimh rechargables.

So far I have heard over 40 states and 20 countries with a 65ft piece of wire in the rafters.

73s

James

KE4MIQ

SolderSmoke Podcast #204 April 1, SPRAT Cover 2, uBITX mania, MAILBAG

SolderSmoke Podcast #204 is available! 

http://soldersmoke.com/soldersmoke204.mp3

5 May 2018

April 1 Recap -- We thank you for your support! 

Pete's Rig on Cover of SPRAT 174 

uBITX Mania

uBITX Dual Conversion Design

uBITX Gettng more out of the Arduino/Si5351 combo

uBITX KD8CEC's amazing software

uBITX Future Possibilities

uBITX On-the-Air Experiences, with CW too! 

MAILBAG

KD8CGH's Hyderabox -- THERE ARE TWO! 
QSO with N1AW's cardboard uBITX
DuWayne on QSO TODAY
Jack 5R8SV -- Radio Gods NOT Happy
Jack Purdum W8TEE -- Thanks OM
Charles AI4OT
Chris KB4PBT 15 inch telescope
John WJ0NF Reading SolderSmoke
Ken W8KTP Ordering a uBITX 
Darren KG7KOI  Listening
Gary AK4NA  New Word:  "Cabinetize" FB OM! 

"The Thrill That'll Hit Ya..." AGAIN! Three cheers for Pete, SPRAT, and GQRP

On the cover of issue 173 of our beloved SPRAT magazine they had my little Direct Conversion receiver.  We joked on the podcast about the old song by Doctor Hook about getting on the "Cover of the Rolling Stone."  Well, on the cover of issue 174 they have one of Pete's magnificent creations.  

Thanks again to the guys who put so much work into SPRAT magazine.  They are now looking for some help.  Please subscribe, and check out page 4 of issue 174 for details on the help that GQRP is looking for.  

KC1FSZ's Above Board, Al Fresco, Free Range, QRO, 4-Foot-Long, Wood-Based BITX

DON'T BOX IT UP BRUCE!  LET THAT RIG LIVE FREE AND BREATHE!  

COULD THIS BE THE WORLD'S BIGGEST BITX?

Hi Guys:

First off, congrats on back-to-back SPRAT covers.  

I’ve succeeded in my QRO quest.  Now I’m running the finals from 28V using a home-brew linear power supply and getting about 20W out.  LM723 + 2N3055’s.  I’m making a lot more contacts too.  The only problem is that the “Peppermint Line” is close to 4 feet long now! (Photo below).  I don’t know how N6QW gets his rigs packed into such small cases.  Putting the various boards in edge-wise will probably help a lot, so that’s going to be my approach to the final packaging job.

73s, 

Bruce KC1FSZ