Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
"Gilbert believes that childhood hardships—including at age three losing his father in World War II, leaving his mother and three other children penniless—force one to be resourceful. Before and during his teenage years, he had access to a plethora of inexpensive military surplus gear which greatly helped to make him inventive. Gilbert laments that today's aspiring engineers are lacking the visceral experience of handling and hefting large coils and tuning capacitors, transformers and vacuum tubes, and such. Today’s surplus circuit boards are all but useless as a source of inspiration, or even “spare parts” to tinker with."
More on this project in due course. Lots of soul in this machine.
I'd forgotten about this article -- thanks to Pete Eaton for reminding me. Click on the images for a better look at the article. For an even clearer view, download the images and then open them on your computer.
Thanks to Thomas K4SWL of the SWLing Post for alerting us to this gem. Listen to Sarah Johnston's program describing the origins and early years of broadcast radio in New Zealand.
This wonderful recording and article reminded me of a bit of ham radio history involving New Zealand, and someone who was involved who had a surname similar to mine. The ARRL book "200 Meters and Down" by Clinton DeSoto reports on page 91 that on May 22, 1924, radio amateurs for the first time made a contact between New Zealand and South America. Carlos Braggio operated rCB8 in Buenos Aires. In New Zealand, J.H. O'Meara was at the key in Gisborne.
Writing of the early amateurs, DeSoto wrote (on page 92):
"Why did they do it? None but one of them can know, and only he would know the feeling of driving ambition, the relentless call of work to be done, the gnawing discontent that hungers for accomplishment; it would be hard to put into words. The strange thing is that there were folk, everywhere on earth it seemed, who had that urge."
"The gnawing discontent..." That is what Jean Shepherd had when he couldn't get his Heising Modulator to work properly. We've all been there.
The last line in the quote from DeSoto's book speaks to one of the major themes of this blog and of the SolderSmoke podcast: the way in which people all around the world got interested in radio in much the same way. So many of us, all around the world, often at age 13 or 14, suddenly got interested in radio. We all had (and have!) "The Knack." This is really very nice -- it is something that we have in common, something that pulls us together.
Our friend Jack NG2E is a homebrewer. He is also a Summits-On-The-Air guy. He does much of his SOTA operations along Skyline Drive in the Shenandoah National Park. Jack's Story Map method of documenting this SOTA trip is very cool.
Elisa and I are frequent visitors to this amazing park. Both my kids went to college in the Shenandoah valley, and the park starts just one hour by car west of us. It is a beautiful place. The Appalachian Trail runs through the park; we have crossed paths with "through hikers" who are walking from Maine to Georgia. We have also met up with more than one Black Bear in the park (see below). My son Billy and I launched our Green Hornet rocket from a farm in the Shenandoah valley: https://soldersmoke.blogspot.com/2017/05/still-photos-and-slow-motion-video-from.html
I really like Jack's use of both HF and 2 meter FM. This makes me think that I should blow the dust off my Baofeng HT and bring it out to the Shenandoah next time we visit. Jack's 20 meter CW contact with Christian F4WBN in the Pyrenees added a nice element of transatlantic mountain symmetry.
I know that Jack wants to include a homebrew rig in his SOTA operations. That would significantly add to the already very high level of operational coolness. Perhaps Colin M1BUU or Paul VK3HN could provide some suggestions or encouragement in this area.
It is especially appropriate for us to use that Irish phrase because the design of the rig's new final amplifier is out of Ireland. Our friend Dean KK4DAS added a 16 watt RF amplifier based on a design by EI9GQ to his homebrew N6QW Simple SSB rig. Note the IBEW label on the top.
Here is Dean's blog post on this wonderful project (with video and more pictures).
I usually try to listen in on the Old Military Radio Net on Saturday mornings (3885 kc). Lately I listen with my Mate for the Mighty Midget receiver.
This morning's session was especially good. For me the highlight was when Masa AB9MQ called in from Normal, Illinois using his Central Electronics 20A (see below). That was one of the earliest SSB rigs. A phasing rig, it also ran AM (which was what Masa was using this morning). He had it paired up with a Central Electronics 458 VFO. You folks really need to check out Masa's QRZ.com page:
Three cheers for Alan Wolke W2AEW, truly one of the great guys of homebrew ham radio. Alan's wonderful YouTube videos have enlightened hams all around the world. He is always there to answer questions and help hams (like me) who are at times struggling to understand technical concepts.
Photo from the November 13, 2021 ARRL Hudson Division Awards Luncheon. That’s Alan with the ARRL CEO David Minster NA2AA, the Nobel Prize winning Dr. Joe Taylor K1JT, and 2021 Technical Achievement winner David DeCoons WO2X. Alan was presented with the division’s 2020 Technical Achievement award.
Wow, I was really pleased to learn that Peter Parker VK3YE was a 2021 inductee into the QRP Hall of Fame.
This is a richly deserved honor. Peter Parker has been making extraordinary contributions to QRP and homebrewing for many years. I remember reaching out to him when I was just getting started with homebrew phone gear. I considered him a guru of DSB. He helped me a lot. Peter Parker was interviewed on the SolderSmoke podcast in 2013:
Peter has published many books and has produced many YouTube videos. He hosts an annual QRP gathering in his beloved home-town of Melbourne Australia that gets attention from solder-melters around the world.
Jerry KI4IO is such an amazing homebrewer that he has been dubbed "The Wizard of Warrenton." The picture above shows Jerry during the early 1980s in the shack of Father Moran 9N1MM in Nepal. Jerry was also in India. (I previously posted the info on Jerry's time in India and Nepal, but I didn't have this picture. The picture makes it worthwhile to post the story again.) From Jerry's QRZ.com page:
-------------------------------
While in India I was licensed at VU2LHO and worked a lot of US hams with a 135' flat-top and open-wire feed. I had the antenna strung between two bamboo towers atop the embassy housing 2nd-story roof-top. I also put up a 3/8 wave vertical on the roof for 10 meters. That little antenna had 110 radials stapled into the roof screen and worked very well! The rig was a HW-101. I was in Kathmandu, Nepal from early 1980 to late 1982. I could not obtain a license there, but became good friends with Father Moran, 9N1MM, and would often spend time up at his place putting his Drake station on CW. Pretty cool being real DX! Back in the states in late 1982.
Here I am at one of my many visits to Father Moran's shack.
I got in touch with Jerry because Pete Eaton reminded me that Jerry had homebrewed a discrete transistor version of the NE602 Gilbert Cell Mixer, a device that I am very interested in. Nick G8INE also built one.
Armed now with a NanoVNA, I took a look at the passband of the 5 MHz filter in my Barebones Superhet (BBRX) W4OP built it on a Circuit Board Specialist Board. He put a 5 MHz CW filter in there; I broadened the passband for phone by changing the values of the capacitors. Here is what the passband now looks like in the NanoVNA:
This is what DeMaw would call an "LSB filter." You would get much better opposite sideband rejection by using it with an LSB signal, placing the BFO/Carrier Oscillator slightly above the passband, in this case near 5.002 MHz.
When I first built the down converter to get the 18.150 MHz signal down to the 7 MHz range (where I had the receiver running) I used an 11 MHz crystal for the NE602's local oscillator. But this created a big problem: 18.150 - 11 = 7.150 MHz. That is in the 40 meter band, but note: NO SIDEBAND INVERSION. Then in the BBRX 7.150 MHz - 2.150 MHz = 5 MHz (the filter frequency) but again: NO SIDEBAND INVERSION. The signal started as a USB signal and remained a USB signal.
I briefly tried shifting the BFO frequency to the other side of the filter passband. If I could get it to around 4.985 MHz, it might work, but because the filter passband was so large, and because the crystal frequency was so low, I was unable to shift the crystal frequency that far. In any case the results would have been less than ideal because of the "LSB" shape of the filter. Back to the drawing board.
I decided to cause one sideband inversion.
At first I put a 25.175 MHz crystal module in my down converter. This shifted the 17 meter phone band down to the 40 meter CW band. It worked, but I cold hear strong 40 meter CW signals being picked up by the wiring of the receiver (the box is plastic!). I went back to the module jar in search of frequency that would move 17 meter phone to the 40 meter area (so I would not have to re-build the BBRX front end) but outside the actual 40 meter band.
I ended up using a 25 MHz crystal in the down converter. 25 MHz - 18.150 MHz = 6.85 MHz WITH SIDEBAND INVERSION. After checking on the NA5B Web SDR to see that there are no strong signals in the 6.835 to 6.89 MHz range, I retuned the output circuit on the converter and tweaked the input capacitor on the Barebones. I shifted the VFO frequency down to 1.835 to 1.89 MHz and put the BFO at 5.002 MHz. The receiver was inhaling on 17 meter SSB.
One more change to the BBRX: in his June 1982 QST article, DeMaw warned that trying to get speaker level audio out of the 741 op amp that he used would result in audio distortion. And it did. So I put one of those little LM386 boards I have been using into the BBRX box. I just ran audio in from the wiper of the AF gain pot. It sounds good.
In effect this is my first double-conversion receiver. I usually prefer single conversion, but this project has highlighted for me one of the advantages of double conversion for someone like me who eschews digital VFOs: Starting with a crystal filter at 5 MHz, with double conversion I could keep the frequency of the LC VFO low enough to ensure frequency stability. That would have been impossible with a 5 MHz IF in a single conversion 17 meter rig. But if I were starting from scratch for a 17 meter rig, I could stick with single conversion by building the filter at 20 MHz, keeping the VFO in the manageable 2 MHz range.
Now, on to the SSB transmitter. The Swan 240 dual crystal lattice filter from the early 1960s needs some impedance matching.
I think the key to understanding the Gilbert Cell Double Balanced mixer is to separate out the three tasks that this device completes, and consider them one at a time, using different diagrams:
1) It mixes two signals to produce sum and difference outputs.
2) It balances out the RF input.
3) It balances out the LO input.
Task 1 -- Mixing
The Gilbert cell is like the diode ring mixer in that it switches the polarity of the input signal at a rate set by the Local Oscillator. Another way of saying this is that the mixer multiplies the input signal by 1 and by -1.
Steve Long of the University of California described the essence of this mixing this way (using the diagram above):
In an effort to see this for myself, I drew (noodled!) this diagram:
There are four transistors -- two differential pairs with RF coming into the bases of the pairs.
The LO is a square wave. The LO alternately turns on transistors 1 and 4, then 2 and 3. When 1 and 4 are on, we are in period 1 -- here there is no switching of polarity. Portions of the RF waveform are passed to the outputs. But when the LO turns on transistors 2 and 3, portions of the RF wave form are "crossed over" to the opposite output. Polarity is reversed. We see this in period number 2.
Take a look at the resulting output waveforms. This is the same waveform we see coming out of a diode ring mixer. I really like this drawing because in that complex waveform you can actually see the sum and difference frequencies:
I could see this diode ring waveform myself on my oscilloscope:
In a diode ring, and in other diode mixers, the balancing out of the input signals really takes place in the trifilar toroidal coils that are part of the circuit. Barrie Gilbert needed an integrated circuit mixer that did not use coils.
Again referring to the above diagram, Steve Long of the University of California put it this way:
The ideal balanced structure above cancels any output at the RF input
frequency since it will average to zero.
To fully understand this I find it helps to look at the Gilbert cell circuit drawn in a different way. Here is a drawing from Alan Wolke W2AEW that I found very helpful. It comes from his excellent YouTube video: https://www.youtube.com/watch?v=7nmmb0pqTU0
Suppose the RF waveform at I1 is causing the current through R1 and R2 to increase. At the same time, the opposite phase current through I2 will be causing the current through R1 and R2 to DECREASE. So there is no net effect of the RF signal at the output. The RF is balanced out.
TASK 3 - Balancing Out the Local Oscillator Signal
Here too I used my own drawing, and was guided by the words of Steve Long:
It also cancels out any LO frequency
component since we are taking the IF output as a differential signal and the LO
shows up as common mode.
The important thing to realize here is which transistors are being turned on and off by the local oscillator signal. On one half cycle of the LO, transistors 1 and 4 are on. So the LO signal at the LO frequency are both pulling the same amount of LO frequency current through the resistors. So you have the same change in voltage at the output terminals. And the output terminals are differential. The LO signal results in no voltage difference between the terminals. So the LO frequency is balanced out.
The same thing happens on the following half of the LO cycle. Here, transistors 2 and 3 are turned on. Again, both transistors pull the same amount of LO frequency current through the resistors. There is no differential voltage. So no LO frequency energy passes to the output. LO frequency is balanced out.
--------------------------------
I am surrounded by Gilbert Cell Mixers and I have been using them in my homebrew rigs for many years. I use them in up-converters for my RTL-SDR receivers. I have one in the downconverter for my 17 meter receiver and had one as the mixer in my first SSB transmitter. I built a 40 meter SSB transceiver with NE602s on either end of the crystal filter. Years ago, I built a DSB transceiver with several NE602s. My SST QRP CW transceiver is made with NE602s. I have on my bookshelf Rutledge's book "The Electronics of Radio" that is all about the NORCAL 40 transceiver, built using NE602 chips. But until now I really didn't know how these chips worked. Truth be told, for me they were mysterious little black boxes, and that bothered me. Now I feel a lot better about using these clever devices. I plan on stocking up on the old style (non-SMD) NE602s.
Apparently Barrie Gilbert rejected the idea that he invented the circuit that bears his name. It seems that Howard Jones first used this circuit in 1963, with Gilbert developing it independently (in an improved form) in 1967.
Barrie Gilbert was quite a guy, with electronic roots in the world of tinkering:
My old friend Mike EI0CL used to remind me that hams in Ireland are granted not just an amateur radio license, but an amateur radio experimenter's license, with an emphasis on experimentation. I think we can see that emphasis in the newsletter of the club. It has a remarkably high level of technical content. Check it out, and look at more information on the club:
Rarely if ever will we come across a high quality NETFLIX series built around a shortwave broadcast transmitter. But that is what we have in Gloria. It is really good. We were especially interested in it because we lived in Portugal for three years. In addition to all the intrigue and drama you will catch glimpses of broadcast antennas, big transmitting tubes, and one out-of-focus shot of what appears to be a Hallicrafters receiver (SX-42?)
Acharya Sir Jagadish Chandra Bose, was a Bengali polymath, physicist, biologist, botanist, archaeologist, as well as an early writer of science fiction. He pioneered the investigation of radio and microwave optics, made very significant contributions to plant science, and laid the foundations of experimental science in the Indian subcontinent. IEEE named him one of the fathers of radio science. He is also considered the father of Bengali science fiction. He also invented the crescograph.
Born in Bikrampur (present day Munshiganj District near Dhaka in Bangladesh) during the British Raj, Bose graduated from St. Xavier's College, Calcutta. He then went to the University of London to study medicine, but could not pursue studies in medicine due to health problems. Instead, he conducted his research with the Nobel Laureate Lord Rayleigh at Cambridge and returned to India. He then joined the Presidency College of University of Calcutta as a Professor of Physics. There, despite racial discrimination and a lack of funding and equipment, Bose carried on his scientific research. He made remarkable progress in his research of remote wireless signaling and was the first to use semiconductor junctions to detect radio signals. However, instead of trying to gain commercial benefit from this invention, Bose made his inventions public in order to allow others to further develop his research.
Bose subsequently made a number of pioneering discoveries in plant physiology. He used his own invention, the crescograph, to measure plant response to various stimuli, and thereby scientifically proved parallelism between animal and plant tissues. Although Bose filed for a patent for one of his inventions due to peer pressure, his reluctance to any form of patenting was well known. To facilitate his research, he constructed automatic recorders capable of registering extremely slight movements; these instruments produced some striking results, such as Bose's demonstration of an apparent power of feeling in plants, exemplified by the quivering of injured plants. His books include Response in the Living and Non-Living (1902) and The Nervous Mechanism of Plants (1926).
......Bose's education started in a vernacular school, because his father believed that one must know one's own mother tongue before beginning English, and that one should know also one's own people.
Speaking at the Bikrampur Conference in 1915, Bose said:
“At that time, sending children to English schools was an aristocratic status symbol. In the vernacular school, to which I was sent, the son of the Muslim attendant of my father sat on my right side, and the son of a fisherman sat on my left. They were my playmates. I listened spellbound to their stories of birds, animals and aquatic creatures. Perhaps these stories created in my mind a keen interest in investigating the workings of Nature. When I returned home from school accompanied by my school fellows, my mother welcomed and fed all of us without discrimination. Although she was an orthodox old-fashioned lady, she never considered herself guilty of impiety by treating these ‘untouchables’ as her own children. It was because of my childhood friendship with them that I could never feel that there were ‘creatures’ who might be labelled ‘low-caste’. I never realised that there existed a ‘problem’ common to the two communities, Hindus and Muslims.”
Oh man, I share this with much trepidation because the last time I posted something about the work of Mike KG7TR, Pete N6QW said he felt like putting all of his own work in the dumpster, so much better was the artistry of KG7TR. This receiver is so cool and so well-done that we now might have to post a guard outside the N6QW shack -- heck Mike even has an Arduino Uno and an Si5351 in there! Don't do it Pete!
I was led to this magnificent receiver by the very humble 6U8 tube. Scott WA9WFA and I have been learning (mostly from Grayson KJ7UM) that the much used and sometimes loved 6U8s (three of them in our "Mates for the Mighty Midget") might be a bit long in the tooth, old even by Thermatron standards. I was worried when I remembered that my Drake 2-B has a 6U8 in it -- V2, the first mixer. So I Googled for more info and was led to this amazing receiver, a 2018 creation by KG7TR. How did we NOT see this for almost four years?
As for the 6U8s, well Grayson says the tube has been getting something of a bum rap. And KG7TR has two of them in this receiver, so I will obviously have to give the 6U8 another chance.
--------------------
I didn't know that Lew McCoy had his own crystal and crystal filter company:
In SolderSmoke Podcast #234, I said that I was scrutinizing the filter from the Swan 240 that I had picked up around 1994 in the Dominican Republic. I cannibalized it out in the Azores in the early 2000s and used the parts to build -- among other things -- my first SSB transmitter. I never really focused much attention on the filter that I pulled out of that old rig -- I was just happy that it seemed to work. But I am now older and wiser, and I have some test gear that lets me look at the passband of that filter.
First, take a look at what it is supposed to look like. This is from the manual. Yikes! That passband looks far from flat. I can almost hear homebrewers around the world shrieking in horror and disgust.
Above is a description of the filter, and the schematic, again from the manual.
Here is what my extracted and somewhat re-built filter looked like in my NanoVNA (more shrieking!). The dip in the passband is a lot worse here -- it looks like 10 db vs. 3 db in the manual. This is probably because I'm not even attempting any impedance matching on the filter -- it is just seeing the 50 ohms in and out of the NanoVNA.
Here is my 2002 attempt to rebuild the filter and put it in my SSB transmitter, along with my more recent attempt to flatten the passband. I no longer had the adjustable coil L8, so I made my own coil based on guidance from Ben Vester W3TLN's January 1959 QST article on "Surplus-Crystal High-Frequency Filters." (Ben had an early influence on Pete Juliano's tube-rig designs.) In the picture above I have 1k pots between the filter and the input and the output of the NanoVNA, as described by Nick M0NTV.
Adjusting the 1 k pots, I could smooth out the passband quite a bit. Measuring the pots and adding the 50 ohms of the NanoVNA, it looks to me like this filter is smoother with about 280 ohms at the input and output. I may build two matching networks or some transformers. Some TIAs may also be needed.
(Why the T/R diodes in the BITX 20 amplifiers?) National Receiver.
Bill's Bench Farhan's Talk to RSGB got me thinking of VHF 2 meter AM. 2 meter Benton Harbor lunchbox madness. SuperRegens Super Strange. I broke my Maplin AF Sig Gen in the process. Fixed it. Playing with MMMRX again. Put in 6 kHz ceramic filter. Sounds great SSB and AM. Swept IF with noise, TinySA, and NanoVNA. Need better noise gen. Mod to listen with TinySA (on blog). Thinking of 17 meter /12 meter Dual-Bander IF around 21.4, VFO around 3.41 Mhz. Thoughts? Sweeping double half lattice filter from Swan 240. UGLY.
MAILBAG: --- ROOTS OF MAILBAG: Radio Moscow, Havana Cuba, HCJB, others. -- Thomas K4SWL of the SWL Post: Could have been worse! Stairbag?
-- MY NOVICE LOG -- Heard back from ex-WN2RTH ex-WN2FLK ex-WB2RKK. -- Drew N7DA worked Wes W7ZOI in Sweepstakes. FB. -- Peter VK2EMU The movie Frequency and the Magic of Heathkits. Good, but not that good! -- Thomas KK6AHT! Our old friend. Minima! Now has a young son! FB -- Chuck WA7ZZE Saw QST profile. Sympathizes with Two-er trouble. -- Tim M0CZP. Spell corrector. Vatican Diodes. Infallible! -- Ramakrishnan VU3RDD Working on a NORCAL and a noise cancellation arrangement. -- Skip NC9O said I was 40 Hz off on 17. But he had a reason to KNOW! -- Steve K9NVD Glad he's a listener. -- Bob KY3R Novice Nostalgia. Should he use 75 watt bulb for dummy load? Yes! -- Todd K7TFC Video about why solder smoke goes into the face. -- Anthony VU3JVX Homebrew Antuino. I ask for help in moving freq to 450 kHz. -- Jack NG2E Building Pete's DC RX. -- Scott WA9WFA HBR-13 and MMMRX. -- Stephen 2E0FXZ also got a FT-101 VFO. -- Bob K7ZB on the air with 56 mW and a big antenna. -- Dean AC9JQ Retired. -- Allan WA9IRS Right to Repair update. -- Farhan Invited us to Lamakaan ARC, Dec 11 or 12. Will be on QO100 Satellite Live!
-- Many suggestions about my Apollo 11 Time Capsule. Still looking for ideas.
Happy Thanksgiving to all who celebrate this holiday!
K9YA Telegraph ran (on Facebook) this ad from 1954. It provides an interesting view of where phone operations were in that year. Note that Dale was so intent on selling SSB gear that they were willing to make on-the-air schedules to demonstrate SSB superiority.
Dale claims that with SSB you could have TWO roundtable QSOs on the same frequency, with one group on USB and the other on LSB. I think this assumes really great opposite sideband rejection in the transmitters, and excellent selectivity in the receivers. That might have been a bit of a stretch. But the assumption here was that hams could use USB or LSB -- no rigid adherence to the USB/LSB convention. And the ad seems to focus on the 75 meter band which was seen as the most important phone band at that time.
Dale was selling Collins mechanical filters for 55 dollars. That is the 1954 equivalent of $566 dollars today. No wonder the phasing method was so popular. Note that they were selling Central Electronics phasing rigs right next to the ad for the Collins filters.
I like the graph showing opposite sideband rejection with the Sideband Slicer. Note that the selected sideband was referred to as the "exalted" sideband. All Hail the Single Sideband!
The cover caught my eye. Thanks to the K9YA Telegraph for posting it. I think it captures the allure of radio that most of us felt when we were kids of this age.
Fortunately this 1922 book is available for free download:
It is all about radiotelephone. They are phone guys. Just like us.
And they were homebrewers. They had The Knack. From Chapter II:
Another thing that drew the boys together was their keen interest in
anything pertaining to science. Each had marked mechanical ability,
and would at any time rather put a contrivance together by their
own efforts than to have it bought for them ready made. It was this
quality that had made them enthusiastic regarding the wonders of the
wireless telephone.
And they correctly viewed wireless telephony as being similar to Aladin's lamp. I remember writing that my homebrew DSB transceiver was like Aladin's magic carpet, carrying my voice from the Azores to friends around the world. From Chapter III:
They had
already heard and read enough of the wireless telephone to realize
that it was one of the greatest marvels of modern times. It seemed
almost like something magical, something which, like the lamp of
Aladdin, could summon genii who would be obedient to the call.
This is a reminder of how young the radio art is. This book came out just three years before my father was born. Many of us have in our shacks working rigs that are half as old as radio itself.
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Bill's OTHER Book (Warning: Not About Radio)
Click on the image to learn more
Where are the readers of SolderSmoke Daily News?
Pete Juliano N6QW
Master Homebrewer
Dean Souleles KK4DAS
With beret and with a Michigan Mighty Mite in hand
Finding those hard to find parts.
-
Always the elephant in the room and even more so with Project X... repair
parts. When I lived in Huntington Beach during the 1970's, a town nearby
was Cost...
Proposed Australian FreeDV RADE1 net
-
I've had two good contacts VK3-VK5 using FreeDV RADE1 today. Quite a lot of
stations on air.It would be good to have a regular net for Australian
stations ...
HRWB 240 - Test Leads with Carlos from Parts Candy
-
In this episode we meet Carlos from Parts Candy. Carlos is an experienced
electronics technician and he shares his life-long love of electronics and
his...
The Communicator July - August 2025
-
*A Big One to Last the Summer*
We're coming up to our club's 50th Anniversary and this is another big
issue, with a look back at our history, great article...
A Real ZN414!
-
Recently, I built a simple little TRF receiver for the AM broadcast band
using a TA7642, a modern equivalent for a chip that was quite popular with
electro...
W2ARP
-
Episode 526 - Bob Pantazes - W2ARP In this episode of QSO Today, Eric Guth
4Z1UG returns from a health break to interview Bob Pantages, W2ARP, whose
journe...
The "George Batterson 1935 CW QSO Party" - Summary
-
The first *George Batterson CW QSO Party* has concluded and the results are
in! The "*GB*" was introduced to honor George Batterson (W2GB), who along
wi...
KK4DAS MB 20 Transceiver Complete
-
The MB 20 transceiver is now complete. The rig is a homebrew 10-watt
20-meter SSB transceiver. The VFO module was an ebay purchase of a
salvaged Yeasu...
A Curious 9 MHz Crystal from Mouser Electronics
-
Just a quick post to share info about a good 9 MHz crystal sold by Mouser
Electronics.
I last purchased batches of crystals for xtal IF filters back in 2...
40m Pelican Case SSB Transceiver
-
See YouTube channels for details:
http://www.youtube.com/c/CharlieMorrisZL2CTM
*Test code for the LCD and Si5351*
#include
...
Hollow-State Design, 3rd Edition
-
Hollow-State Design, 3rd Edition is available from: Lulu Press:
tinyurl.com/hollowstatedesign3 eBay: search for “hollow-state design”
Electric Radio bookst...
I Finally Bought My Dream Airplane
-
Aviation has been a love of mine since I was a very little person. Living
in Nevada, seeing posters and ads for the Reno Air Races, specifically the
Texa...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
Raduino as NBFM TX
-
Here is a neat, 30 minute hack for your Raduino to turn the Si5351 into a
pretty stable, solid NBFM transmitter. The hack is to add a varactor diode
in ...
QRP Labs shop!
-
[image: Shop]
All QRP Labs kits may be ordered online securely at the shop, with PayPal
payment.
*Click here to visit the shop!*
*Click!*
*Shop! Order...
Posts
