The Limerick Revolution

On the last podcast I mentioned a new PC board technique being pioneered by Rex, W1REX, out of Limerick, Maine. The Limerick technique uses cool-looking black PC boards with pads for the components. (The picture above is the kit version of AA1TJ's famed Reggie receiver.) Connections between the pads are via PC board traces within the board. I like it because it seems to provide the big advantage of our beloved Manhattan technique: you have all the parts and connections topside. Check out Rex's fine line of kits: http://www.qrpme.com/

Today G-QRP club announced the release of a Limerick kit version of G3RJV's Sudden receiver.
Take a look at the final product and the boards:

Very nice. Read more about this wonderful kit here: http://www.gqrp.com/sudden.htm

Go Limerick! Go Sudden!

QRSS LED FSK Experiments: More Blue vs. Red

On my little Colpitts/DaVinci/G0UPL less-than-10 mW QRSS rig, I started out with a forward biased (downward pointing) Superbright Blue LED (from AL7RV). (Refer to Hans' schematic, above.) You can see the resulting pattern below. That is my signal above that of Alan, VK2ZAY. At first I thought the diode was just switching in the 5 pf cap, but Hans (who knows this turf far better than I) thinks it is more of a varactor action. I now think it is a little of both: When that + 2.5 volts from the multivibrator hits the diode, it goes partially on (it even glows a bit). This puts the 5 pf cap into the circuit (through the resistance of the diode). The diode itself increases in capacitance because of the increased forward bias. As a result, the total capacitance increases, and the frequency drops a bit. Thus, forward-biased diodes result in upside down FSK. You can see a bit of the varactor action in the curve on the trailing edge of my not-so square waves -- I think that marks the period in which the voltage from the multivibrator is slowly rising:

Just to make Hans happy, I switched from a forward biased blue to a reverse biased (upward pointing) red diode. The resulting pattern (below) looks a lot like the pattern shown in the picture in Hans' excellent SPRAT article. This is clearly FSK. The positive voltage from the multivibrator increases revers bias on the LED, DECREASING capacitance and RAISING the oscillator frequency. In the curve of the leading endge of the pattern you can see the voltage from the multivibrator slowly rising. FSK here is "right side up."

Finally I tired a little 1N914 diode forward biased. I was hoping to see some cleaner switching action, but even with this little diode you can see quite a bit of varactor action at work:

I think the switiching would be a lot cleaner and more complete if the voltage from the multivibrator wasn't coming through a 1 meg resistor. But when you put a lower resistance in place of the 1 meg ohm part, you start to mess up the frequency of the multivibrator.

I have to say, my favorite pattern is that from the Blue diode forward biased. Sorry Hans. To each his own...

I'm guessing that AL7RV went to Michigan...

Thanks to Johan for the ON5EXcellent grabber which is visible over here>>>>>>>>>>>>>>>>>>>

Altoids to the Max!

Rogier, KJ6ETL, sent an interesting link to some inspirational projects involving Altoids tins:
http://blog.makezine.com/archive/altoids_and_tin_cases/ The first one that appears seems to belong somewhere else -- just scroll down to find the tins.

Wiki provides background info:

Altoids are a brand of breath mints that have existed since the turn of the 19th century. Altoids are less widely available in Britain—their country of origin—than in the regions to which they are exported, the standard peppermint mints being the only flavour available and only stocked in relatively few stores. Callard & Bowser-Suchard manufacture and produce Altoids at a plant in Bridgend, Wales, although Wrigley, the brand's owner, announced in mid 2005 they planned to move Altoids' production to an existing plant in Chattanooga, Tennessee, in order to manufacture its products closer to where they are sold.

The history of Altoids dates back to the reign of King George III. The brand was created by a London-based Smith & Company in the 1780s but eventually became part of the Callard & Bowser company in the 1800s. Their advertising slogan has been "The Original Celebrated Curiously Strong (insert flavour here) Mints" for a number of years, referring to the high concentration of peppermint oil used in the original flavour lozenge. The "Story of Altoids" text is printed on the paper liner inside certain tins.

---------------------------------------------------

One cautionary note: Apparently Altoids mints played a minor role in the Bill Clinton-Monica Lewinsky mess. We won't go into the technical details here, but suffice it to say that a collection of Altoids tins on your desk at work may raise some eyebrows among some of your colleagues.

Soldersmoke Podcast #124

That's Billy on the right

http://soldersmoke.com

May 3, 2010
Oprah follow-up: On to Martha Stewart and Dr. Phil?
Fencing on a Roman piazza
Breaking an important cable
My WSPR Direct Conversion receiver
Roger Hayward's wonderful ugly AF amp circuit
The beauty of SBL mixers
My DaVinci Code Oscillator goes on the air!
Making my own 555 timer chip (sort of)
LEDs as varactors (or are they colorful switches?)
Black Holes in workshops -- is the LHC to blame?
Altoids: now made in TENNESSEE!
G3RJV's wonderful video
MAILBAG

Down For Maintenance

Not the radio gear, not the blog, not the podcast. ME! All that running around in the fields of the Sabine Hills finally caught up with me. Last Sunday, while chasing a kite, I tripped and my foot moved in way that nature never intended it to. I popped (quite audibly!) my Achilles tendon. No big deal, but it did require some minor surgery and now I have a big cast on my foot that may cause me to spend additional time in the shack.

I hope to get the next podcast out as soon as I can. Maybe tomorrow. I will try to spare you all the gory details. Back to the radios! I've had a very interesting e-mail exchanges with Hans Summers G0UPL about LEDs as varactor diodes and their use in QRSS FSK systems. I'll talk about this in the next podcast.