Clockwork CW: The Path to Minimalist QRSS?

Well, maybe not using that one. But something like it. The idea -- mentioned recently on the podcast -- is to use a mechanical clock mechanism to generate the CW for a QRSS beacon. This would allow us to get the transistor count for our beacon down to one. For some odd reason, some of us find this appealing, especially when you consider that the transistor count on the receive side is in the tens or hundreds of millions. One is the magic number. You can see how this project brings together two of the biggest littlest recent trends in the QRP radio: QRSS and minimalist radio.
It's kind of scary when you Google something and are referred back to your own blog. That's what happened to me on this subject. Back on May 28, 2008, this was posted (by me!) as a comment to one of the beacon-related posts:

Hello Bill and Others:
A few years ago, a buddy had made a neat keying operation made by taking a
one RPM clock motor and had it rotate a printed circuit board disk that had
the callsign etched on it several times sequentially. Clock motors are
made to run continuously for years, and it stood up with just an
occaisional cleaning of the wiper arm with spray cleaner.
All the best to all!
73 de Lee Smith VE4ANC

This message from Lee was a response to a January 1999 question from me. So we are sort of re-inventing the wheel here.

Of course, there are some QRSS beacon circuits out there with VERY low transistor counts. Hans Summers has one on his site that used a bi-stable multivibrator to generate a pattern for QRSS. That would yield a total transistor count of 2 or 3. But we are going for one single transistor. And I kind think we should look for something that will allow for the transmission of callsigns.

Here's an e-mail exchange from the Knights of QRSS mailing list that may generate some ideas:

Re: [Knightsqrss] Junkbox + soldersmoke = pattern generator

Saturday, March 7, 2009 10:43 AM

From:"Paolo Saia"

To:"n2cqr"

Very nice idea Bill. After tiny solar mepts this could been our next QRPP/ET challenge .
73 de Paolo IZ1KXQ
--------- Initial Header -----------

From : knightsqrss-bounces@cnts.be
To : knightsqrss@cnts.be,"Soeren Straarup" xride@x12.dk
Date : Fri, 6 Mar 2009 21:48:55 -0800 (PST)
Subject : Re: [Knightsqrss] Junkbox + soldersmoke = pattern generator
It would be fun if the clock were a "wind up" type. And for extra credit: Power the transmitter with the energy from the same spring mechanism (or other wind-up device) that powers the clock!
ET PHONE HOME!
--- On Fri, 3/6/09, Soeren Straarup <xride@x12.dk> wrote:

From: Soeren Straarup <xride@x12.dk>
Subject: [Knightsqrss] Junkbox + soldersmoke = pattern generator
To: knightsqrss@cnts.be
Date: Friday, March 6, 2009, 3:30 PM
Hi list,
Hans Summers has made an astable multivibrator as pattern
generator.
Bill Meara has thought about making a analog clock.
Alan Yates loves my idea of an exercise bike pattern
generator.
Though i'm open for suggestions. No pics, pc or
any other programmable
devices.

Rules of design:
1) KISS
2) Should be in most junk boxes
3) Pattern should be easily changed (diversity, more
homebrewers)
4) KISS
This is for a simple Pixie2 TX modified to be a QRSs TX.
Stability? SSShhh.
Vy 73 de OZ2DAK
Soeren Straarup | aka OZ2DAK aka Xride

Lots of Great Old Radio Books FREE!

Our man in Helsinki, Greg, OH2FFY, reports that "Armstrong: A Man of High Fidelity" is available free online. We talked about this book in a recent SolderSmoke. I checked it out and found the online version to be very easy to read. I suggest you click on the "flip" version -- you get a very nice display that is much like looking at a real book. Here's the link:
http://tinyurl.com/cvc4qd
That link led me to Project Gutenberg where I plugged in the word "radio" and was instantly given a list of really nice old books, including the Radio Amateur's Handbook by A. Frederick Collins of Congers N.Y. (my home town). Here it is:
http://www.archive.org/details/theradioamateurs06935gut
Thanks Greg!

Italians at the Forefront of QRSS

In SolderSmoke 102 I mentioned that Italians are playing an important role in QRSS. Alberto, I2PHD, is certainly one of the key people. His software is behind most of the grabbers that we all use. THANKS ALBERTO! Here's his bio:

Born in 1944, in Lucca, Tuscany, Italy. Got a Doctorate Degree in Physics at the University of Pisa. Since then worked for IBM, with various responsibilities. Radioamateur since 1966, active on most bands, from 160m to 23cm. Lately experimenting with 137 kHz, recently allowed in Italy with 1W ERP.

Studying and applying DSP and digital techniques in general. Author of Winrad, SDRadio, Spectran, Jason, Argo and Hamview, widely diffused programs for SDR (Software Defined Radio), spectral analysis and real time filtering of audio signals, received with a radio and routed to a PC equipped with a soundcard.

Despite the age, open to learn new techniques and theories. *Not* a tube (or valve, depending on the side of pond you are reading this) nostalgic.

73 Alberto, I2PHD

Home page http://www.weaksignals.com

ET Phone Home! With Minimalist QRSS!

I knew that Alan Yates, VK2ZAY, was just the man for this project. Alan and I met up several years ago when Billy and I spotted and built his Trivial Electric Motor (we still have it, and occasionally fire it up to amaze visitors). On SolderSmoke 102 I mentioned the possibility of a one transistor QRSS transmit station. Obviously this would require some sort of mechanical keyer. I thought of a clock drive. Alan pointed out the in the 1982 Steven Spielberg movie, ET had used a saw blade as his mechanical modulator (see above). Alan also had some intriguing ideas of his own:

G'day Bill,
Thanks again for noticing my QRSS signal making it through to Europe.

Your talk about mechanical solutions for QRSS modulators immediately
made me recall "E.T. the Extra-Terrestrial". The "Phone Home" device he
built had a modulator based on a sawblade IIRC - its been years since I
watched that 1982 classic.

One easy hack might be to use an AC synchronous motor out of a gobo
rotator (for example, I got one out of a fibre optic christmas tree that
expired from overheating). Its reduction drive results in a fairly slow
rotation which might drive a modulator plate. You could do the pickup
optically using a LED/photodiode (or transistor, or even an LDR I guess)
transmission pair. Electrical contacts would work too, but doing it
optically probably means it would have a longer life.

A tape loop system might also be practical and would allow long
modulations to be encoded at reasonable tape rates. A syncro-drive gobo
has to be turned fairly slowly and pushes the "density" of the data
fairly high so the mechanical or optical sensor gets harder to just
throw together. I am sure a clockwork driven disk could be made to
work, it just might have to be fairly large.

Mechanical readout might be a microswitch and holes in the plate, or
even using PCB material with the pattern on it (etched or masked), and a
brush contact. To minimise wear a brass small roller held against disk
with spring tension would work. Oxidation on aging might become a
problem - yeah the more I think about it I am liking optical better.

You can also do it electrically using a diode matrix which can be read
out with some counters. Of course that defeats the original purpose
which was to make a single transistor QRSS beacon with a mechanical
modulator.

One completely insane idea that just occurred to me is to build a slow
mechanical oscillator (say driven by a Stirling Engine or a Curie Point
Pendulum heated by a small candle) and modulate the RF oscillator with
that. The mechanics or thermal system might directly effect the RF
oscillator frequency. Who will make the first candle-powered QRSS
beacon with thermopile PSU? :-)

Regards,
Alan
http://www.vk2zay.net/

Homebrew WSPR from W3PM

Recently I've been reading with envy the WSPR reports from K6HX. Mark tells how he walks into his shack each morning and is greeted with signal reports from around the world. Beautiful maps are presented, with lines arcing from Southern California to distant islands in the South Pacific. I burn with envy. I want to WSPR too! But I have no SSB gear for 30 meters, and unlike our beloved visual MEPT QRSS, WSPR requires SSB gear.

I had mentioned all this on SolderSmoke, and this morning Gene, W3PM, came to the rescue. He sent info on a really interesting and very simple SSB transceiver. Take a look at the block diagram. On transmit it is essentially a DSB rig with a filter at the operating frequency to knock down the unwanted sideband. On receive it is a Direct Conversion receiver preceded by a narrow filter that allows the WSPR frequencies through. It uses the familiar SBL-1 mixer. The filter has only one crystal. And --icing on the cake -- Gene built his version in modular form, with each module in an Altoids tin. Clearly, this is the WSPR rig for us!

Gene provides a very nice write up on his project here:
http://www.knology.net/~gmarcus/WSPR/wspr2.pdf

Gil Cartoon of W7ZOI on the Mountaintop

Steve, WA0PWK, sent this one in. He found it in an old issue of "Hints and Kinks." Note the callsign on that FB HB portable rig. Wes tells me that this cartoon was actually a Doug DeMaw initiative. Doug took an older cartoon by Gil, W1CJD, and put "W7ZOI" on the rig. The drawing appeared next to a short article by Wes about an electronic keyer using a pair of 741 Op Amps. Wes also reports that his kids got a real kick out of it -- his son Ron was taking an elective printing course in Jr. High School at the time, and printed up a bunch of W7ZOI QSL cards featuring the modified Gil cartoon.

I thought that Steve, N0TU (now WG0AT !), would find this especially interesting.

SolderSmoke Podcast #102

For the podcast go to:
http://www.soldersmoke.com

For the new SolderSmoke Store:
http://www.cafepress.com/SolderSmoke

In SolderSmoke 102:

In the shadow of Vesuvius...
...then back to the "laboratorio."
-------------
QRSS musings:
1 transistor for transmit, 100 million for receive.
We need a low tech beacon generator -- maybe mechanical clock driven?
QRSS on "Hack-A-Day."
VK2ZAY QRSS booms into Europe.
Soul in the New Machine: Billy's oscillator.
ON5EX's grabber on SolderSmoke blog.
Italians at the forefront of QRSS.
--------------
T-shirt news: "Menus are for restaurants!"
"QRSS Ops Do it Very Slowly"
--------------
Using iGoogle for ham radio.
USENET is going strong!
Back on Echolink.
--------------
Minimalist Radio:
The Gnat! The NS-40!
I add a second transistor to my ET-1 (and hang my head in shame).
--------------
MAILBAG:
Jim, AL7RV, developing smoke generator for LTSpice.
Randy, K7AGE, sent Empire of the Air video -- Thanks!
Jim, K9JM, prescribes higher Q for regen rx. "Never will be a 2B!"
Rye, K9LCJ, "Low Space Means Fine Teletype."
Alan, W2AEW, Listens to SS while on the road with Tektronix.
Dave, W8NF, "Armstrong, A Man of High Fidelity." Indeed.
Mark reports W7ZOI releases new EMRFD software.
Jonathan, KB1KIX, Shep fan, has good Smith Chart stuff on his blog.
Jerry, NR5A, building a QRSS beacon.
George, K8VU, Dilbert has "utter social ineptitude."
David, VK6DI, moving East.
Paul, K3PG, took Willamette project on ski trip.
Steve, WA0PWK, Gil cartoon about Wes.
---------------------------

Out of the Ozarks... The NS-40!

I think this new rig is really interesting. NS stands for "No Simpler." It has only 14 parts. The coils are etched into the PC board (see above) -- I've never seen that before in an HF rig. It runs Class E and puts out 5 watts! The Designer is David Cripe, NM0S, and a kit is available from the 4 States QRP Club for only $30. Look here for more details:
http://www.wa0dx.org/wa0itp/ns40.html

Out of the Sonoran Desert... The Gnat!

We've been away for a few days, down in the shadow of Vesuvius, but I'm back in the shack now, and this morning I've been looking more closely at the latest creation out of the Sonoran Desert:
Chris Trask, N7ZWY, has given us the design for an amazing rig he calls "The Gnat" (Chris has a deep interest in the flora and fauna of the Sonoran Desert.) Like the ET-1 and FETer, The Gnat is an HF transceiver using only one active device. Chris uses a 2N2222 transistor. But unlike the other one-device rigs, The Gnat uses no switches or relays for T/R transitioning -- his rig goes from Receive to Transmit just by pushing the key down. The receiver is, of course, a regen. And get this: The Gnat can produce somewhere in the area of .5 watts to 2 watts of RF. Wow, that's one big bug! There's definitely a lot of Knack in The Gnat. Check it out:
http://www.home.earthlink.net/~christrask/Gnat%2040.pdf

QRSS on HACK-A-DAY

Eliot over at Hack-A-Day was kind enough to run an article about our QRSS exploits. I figured this aspect of the hobby would be intriguing for the more computer oriented folks who visit that blog. Judging from the comments, I think I was right.
Check it out:
http://hackaday.com/2009/02/22/qrss-radio-amateurs-slow-speed-narrowband/

Happy 6L6 DAY!

Cory, WA3UVV, sent in this nice article about a beloved vacuum tube:

Say "73" to the 6L6

Sometime in the spring of this year, the 6L6 will celebrate it's 73rd birthday. Originally conceived of a year earlier by engineers at General Electric, it represented a new design in receiving tubes (more about that later) and used the recently developed metal case(envelope), instead of glass. RCA was licensed to manufacture it and the first ones hit the market in 1936.

Originally thought of for audio use, it could give you 30+ watts of RF if used in a single-tube oscillator circuit. Not bad for a "receiving" tube - a general name used for things that were "low power" when thought of in comparison to broadcast radio transmitter power levels. It quickly became the most popular tube for ham transmitters for many years to come.

In a fairly short period of time, the 6L6 was also produced in a variety of glass envelopes. In fact the basic 6L6 went through many changes and upgrades as it went through life. RCA moved the plate connection to the top and the 807 was born. This power house, when given 600 volts on the plate could manage 60 watts without breaking a sweat. So much in use, the term "807" was once a popular ham nickname for beer. Technology marches on, and eventually the 807 was succeeded by the shorter 6146. The 6L6 saw it's life increased as the 6LQ6. Both of these tubes were quite popular, as well. Used in sets in kilowatt-level amplifiers with over 1,000 volts on the plates, they also showed up in pairs as finals in hybrid rigs in the 70's. I have a Handbook from 60+ years ago with a circuit for a one-tube 6146-based, 75 watt crystal-controlled transmitter. Don't try that with anything less than a FT-243 crystal...

The 6L6 also had lower rated siblings, the 6V6 (popular with Novices and used in some commercial designs like the Ameco AC-1 transmitter kit) and the 6K6 (very QRP-friendly). "Circle of Life" fans will note that 6L6's still enjoy use everyday, although primarily in audio amplifiers for those who like the glow and "warmth" of the the sound. You can find them at music stores for $50 a pair and up or at hamfests and Ebay for much more reasonable prices.

While I don't know the exact date the 6L6 arrived, March 14th is the 73rd day of the year. There's still time to celebrate the 6L6 by building a rig and putting it on the air that weekend. A straight key is strongly suggested. A quick perusal of the League's searchable QST database (you are a member, aren't you?) will turn up many design ideas and possibilities. Even if you don't have a spare 6L6, 6V6, 6K6, etc. to play along, they're easy to find. (In fact, I'm sure I have a spare for someone who wants to build his own rig in the coming weeks.)

Power supply? A 6 volt filament supply is easy - you can even use some wall warts for that. Coming up with 150 to 600 volts may be a bit more daunting, but if you have a tube-based receiver (makes a nice companion) you can carefully borrow some B+ for a low-power version. Or, go to the "everything we sell is a dollar, so please don't ask how much it is" store and pick up some 9 volt batteries. If you buy 15 packs of 2, you can click them together and come up with 270 volts for (wait for it) $15.

Hey, don't touch the ends to see if it's hot - it's still 270 volts and is dangerous if not respected! Pick up 15 more packs and you'll have a real rock crusher on the air.

If you've never gone on the air with tubes, here's a fantastic opportunity to mark "73 to the 6L6 Day" (or something like that). Remember, real radios glow.

W3JDR 's LTSpice NE602/SA612

Here's something we've needed for a long time: an LTSpice model for the ever-popular NE602/SA612 chip. Joe Rocci, W3JDR, developed this one back in December. You can download it, along with the LTSpice program (free!) from links on Joe's page:
http://w3jdr.ham-radio-op.net/ Thanks a lot Joe!

Speaking of Spice, Jim, AL7RV, has been e-cursing me for getting him involved with this highly addictive program. Jim has come up with an ingenious idea for making the simulation experience more realistic. I will tell you all about it in the next podcast.

The Reggie Works a DX Station!

There it is. Finally we see it. The famous Reggie of AA1TJ. With an awesome 80 milliwatts of 80 meter RF, Mike yesterday worked the Bahamas with his highly unusual rig. For more details visit Mike's always inspirational web site:
http://mjrainey.googlepages.com/reggie

WA5DJJ's QRSS Beacon: Immediate Success!

Here's a story that really captures the fun of QRSS, the way in which this mode can be both high tech/DSP-ish and low tech/minimalist at the same time. It also shows the global reach of the fraternity that supports QRSS. In SolderSmoke 101 I reported on the QRSS building project of Dave, Wa5DJJ. He was building a rig based on a design by the esteemed Maltese radio wizard Stan, 9H1LO (Stan appears in the SolderSmoke slide show -- he is the guy in the lab coat.) You'll recall Dave's comment on how upside down FSK might be useful in reaching our brothers "down under." Yesterday Dave put his new creation (see above) on the air, and posted a message to the Knights of QRSS Yahoo Group. In Belgium, Johan, ON5EX, saw Dave's message and decided to check W8LIW's receiver (via LIW's online grabber). Johan saw Dave's signal and reported the success to the Knights.
You can read more about Dave's project here:
http://www.zianet.com/dhassall/QRSS.html

Here is the e-mail exchange between Dave and Johan:

Tuesday, February 17, 2009 7:46 PMFrom:

"Johan_Smet@telenet.be"

To:

knightsqrss@cnts.be

Hi Dave, I can see your sigs are on the Ohio W8LIW grabber right now, with a little downward shifting. Well done! Your website truly reveals a keen QRP-er and homebrewer. BTW: I’ll be firing up my first RockMite (20) soon! 73, Johan on5ex

---

From: knightsqrss-bounces@cnts.be [mailto:knightsqrss-bounces@cnts.be] On Behalf Of David R. Hassall
Sent: woensdag 18 februari 2009 1:30
To: knights QRSS
Subject: [Knightsqrss] WA5DJJ on the air!!

Dear Gang,

First test of my QRSS 10.140Mhz MEPT. It should be around 1.060 on the waterfall. Power output is 122mW (All I could squeeze out of my poor little 2N222A final. Keying is up shift, at about 5 hz. I hooked it to my 30 Meter Inverted Vee off my tower. Apex is at 40 feet. I think I have it right and hope it doesn't blow up. We shall see when I get some reports. I will have pictures on my website as soon as I can get them there. Thanks for all the advice and help. This was a really fun project. Now to get a couple more built to get some others on the air.

73 Dave

------------------
BTW: I succeeded in putting Johan's grabber output onto this blog. Look at top of my right-hand column. If the sun is up over Europe, you should see my upside down FSK around the middle of Johan's screen. (He has the screen kind of split in two to allow more minutes to be displayed, so you should see me in the middle of both the top and bottom halves of the screen. ) You may have to hit the refresh button on your browser to get my blog page to pull down an update of Johan's grabber. Just think about how cool this all is: I transmit a 50 mw sig from Rome with a very minimalist rig. Johan receives it in Belgium using DSP software and puts the results on the www. I embed his output screen on my blog, which you can now see, almost in real time!

Comet Lulin

I don't think I will be able to see this one through the bright and murky skies of Rome, but I may give it a go. Sky And Telescope Magazine has a nice write up that tells you when and where to look. The best night for seeing this one are coming up soon:
http://www.skyandtelescope.com/observing/highlights/35992534.html

Armstrong's Regen (and lots more)

There it is. Howard Armstrong's regenerative receiver. Mike, KC7IT, led me to the wonderful website that has this picture, and much more. The site has all kinds of schematics and pictures and letters related to the work of radio pioneer Howard Armstrong. Check it out (you should probably take the tour by hitting the NEXT button on each page):
http://users.erols.com/oldradio/eha1.htm

I continue to work on my regen (part of the ET-1/FETer minimalist project). Jim, K9JM, says the raspy tone on CW signals is caused by FMing of the regen stage and prescribes a coil of higher Q. Thanks Jim.

SolderSmoke 101

http://www.soldersmoke.com

Superbowl Sunday in Rome. "Playing for Pizza." Spirals on the Piazza
Empire of the Air -- Gerbils Renamed
"Electrons on Parade"  Good RCA film about tubes
Minimalist Mania:
  ET-1/FETer transmitter built -- some problems
  New Minimalist Yahoo group
  AA1TJ and AA1MY make QRP History with tunnel diode rig
QRSS News:
  New beacons and grabbers in US and Canada
  K6HX and the lure of the whisperers
  Upside down FSK for VK/ZL observers?
Chip extraction tips (belated)
What "s.o.t." means.
MAILBAG:
Brad WA5PSA still jogging in Tulsa
Ted AJ8T and Paul VK5PH: Lake not named for Lee
Neil G7AQK HB mystery box
Doug WB5TKI on how to extract chips
Ron AA5RS advises Billy to stick with Linux
Bill AA0RQ uses the hard stuff
Scott on Heaviside:  Good guy or not?
Brent in Twin Cities: SWL Rockmite and SS lead to ham radio
Dan NM5DV building SDR QRSS rig
Jeff K07M listens while flying private plane
John W6TC has great article for Electronic Design
Edwin WA4YHL: Amateur Logic TV #23 is available
Dale WA5DJJ on the possible benefits of upside down FSK
Eddie G3JZO: Upside down FSK looks like laundry on the line!
Jerry NR5A has the minimalist bug

For the podcast go to:
http://www.soldersmoke.com

For the new SolderSmoke Store:
http://www.cafepress.com/SolderSmoke

Halted Specialties -- Our kind of store!

The New York Times recently ran a story about Halted Specialties, the Silicon Valley electronics store. Wow, almost makes you want to move to the area,
Here's the article:
http://www.nytimes.com/2009/02/05/technology/personaltech/05basics.html?_r=1

No need to move. They do mail order:
http://www.halted.com/

Looks like they are having a Vintage Radio event on Feb 21, 2009

It's an ANALOG world, after all......

John Edwards, W6JE, has written a really great article for Electronic Design. It is about analog circuitry, and the place of skilled analog designers in our increasingly digital world. John's article is filled with references to the kinds of issues that frequently pop up in the clouds of solder smoke that we work in, things like the need for a certain intuition about circuits, the need for deep understanding of how things work and why some things work and others don't. He mentions the element of craft and even "black magic" that plays a role in analog design and construction. In short, John's article describes "The Knack." He even manages to use the word in his article, and acknowledges (in his bio) that he has been a victim of Dilbert's disease ever since a childhood encounter with a Heathkit Sixer. Check out the article:
http://electronicdesign.com/Articles/ArticleID/20562/20562.html

You should also visit John's personal web site. We're about the same age, and we are both from New York City. John's page reminded me of another factor that might have put me on the path to solder smoke and hamfests: The 1964 World's Fair. Here's John's page:
http://www.gojohnedwards.com/

Thanks John!

"Empire of the Air"

Here's the book I've been talking about. Four Solder-stars. Strong on history and biography, but a bit light in the Knack department. Still, strongly recommended.

Minimalist Mania: AA1TJ-AA1MY QSL, New Yahoo Group

Above is the very classy QSL that Mike, AA1TJ sent to Seab, AA1MY, confirming the first ever tunnel-diode skywave QSO (see below for more details). Go Mikums!

In related news, Jerry, NR5A (who has also been bitten by the minimalist bug) reports the creation of a new Minimalist Radio Yahoo group:
http://groups.yahoo.com/group/Minimalist_QRP_Transceivers/

(Jerry and I have been attempting to translate some technical terms found in British schematics. Even though I lived there for four years, I admit to being stumped by "s.o.t." given with values for capacitors. Could this be "subject of test"? )

"ELECTRONS ON PARADE" A Film from the Radio Corporation of America

Gee-willikers! This RCA movie is the cat's pajamas! Really great stuff. The guy who posted it on YouTube said it had been sitting on his shelf for years, apparently just waiting patiently for the broadband Internet.

I hadn't realized how labor intensive tube production was. Looks like every one of those fire bottles was, to a large extent, put together by hand. The contrast with the way solid state devices are produced is really striking -- the tubes seem like the product of artisans. And they somehow just seem to be more homebrew-friendly than modern solid-state devices.

Don't miss Part 2! Here we see "heroic hams" in action, saving people from serum shortages during floods, etc. Watch the policeman with the Tommy-Gun almost run over the kid on the bicycle. Yikes G-man, that was close!

The date on the film is 1942, and judging by the number of women shown working in the factories it does seem like a wartime film, but I was surprised by how infrequently the tube's role in the war effort was mentioned.

AA1TJ and AA1MY MAKE QRP HISTORY

I was feeling smug about my version of the ET-1/FETer single FET transceiver. I built the transmit portion of the rig this morning, and it fired right up, producing a nice clean CW signal. But then news came in of the historic 100 mile QSO between Michael, AA1TJ, and Seab, AA1MY. Michael was using his new Mikums rig, an 80 meter transceiver built around one tunnel diode. My FET rig seems like a QRO appliance in comparison to the Mikums. Michael's diode rig was putting out 160 micro watts. Yes, 160 uW. Congratulations to Mike and Seab. I'm sure Mike would not mind my sharing his e-mail on this subject (see below). Reading it, you can just feel the excitement that came from this historic contact. I'm sure tunnel diode inventor Leo Esaki (pictured above) would be pleased.
Be sure to check out Michael's description of the rig:
http://mjrainey.googlepages.com/mikums
Also, don't miss the pages on Reginald Fessenden:
http://www.newsm.org/Wireless/Fessenden/Fessenden.html

Friends,
Seab, AA1MY sent me a message just over an hour ago saying that he suddenly began hearing my Mikums transceiver running as a beacon! Seab lives in Bethel, Maine, an air distance of exactly 100miles/160km from my QTH. A few hours earlier I'd measured Mikums' output power at 169uW (yes, microWatts!).
I was at the computer when his message appeared so I quickly called him on the telephone. He said that he'd been monitoring while he was busy with some paperwork. He'd just returned from fetching a load of firewood and all of a sudden there I was! He put the phone near his loudspeaker and I just about fell over! I was weak, but perfectly readable.
Then I practically hung-up on the poor fellow in order to race down to my shack in order to try for a QSO. I heard him clear as a bell at a power of 40w (I reported 459, but I ought to have sent 559). He confirmed my report and then dropped down to 4w. Although weak, I easily copied his 429 report to me. I gave him a 219, which he confirmed.
Oh boy...it's done. We made a skywave QSO using a one-tunnel diode transceiver. I'm practically giddy here :o)
Many thanks to Jim, W1PID, who has patiently listened for several days. In fact, Jim has copied my CQ and callsign several times before my signal evaporated on a breeze of QSB. In return, I copied Jim's Small Wonders Labs DSW at 2w on Mikums with no problem the other day. Again, many thanks, OM. The next time we meet, I'm buying, okay?
Again, way to go Seab; that's one small step for man....naw, more like one more exciting and thoughly useless (ain't it great!) milestone in the history of QRP :o)
73/72's all around,
Mike, AA1TJ

St. Elmo's Fire and Lightning Brushes

I guess I am and AMer at heart. As a kid I used to listen to the AM QSOs on 75 meters in the Northeast. I still occasionally take a look at the AM Window website and follow the chatter from afar. This is another corner of the hobby where guys still melt solder and study schematics.

One of the many interesting things found via the AM Window is an on-line archive of the AM Press/Exchange newsletter. There are some very good articles in there. Issue #114 has a good one by George, W2WLR. It's about lightning and ways to prevent strikes. What I like about the article is the very practical, hands-on approach. George describes how one intrepid enthusiast put an amp meter between a radio tower and ground and watched the currents generated by a nearby storm (don't try this at home!). The article discusses how brushes on the ends of lightning rods help bleed off charge. You can see some charge bleeding off the masts of the ship depicted above.

After reading his article, I went to work. In an idle moment, I looked out the window across Rome's Via Veneto and saw on one of the hotels some lightning rods tipped not quite with brushes, but with multiple spikes. Go St. Elmo!

Humber College Homebrew Space Station Contact? Not really

I wasn't going to mention this, but since we were talking about Grote Reber, I sort of feel obliged to raise this subject. The techno-blogosphere is filled this morning with the story of four Humber College (Toronto) seniors who supposedly contacted the International Space Station with homebrew gear. See: http://www.humber.ca/stories/first_contact.htm Wow, pretty good, eh? Well, not so fast SolderSmoke fans. Turns out you have to read the fine print. They did it with a radio system that they "designed and built themselves." I looked at the slide show and their operating table was covered with expensive commercial gear. Sure enough, when I checked their blog, I found this:

Today, Mr. Rector, Paul, and I went out to Radioworld and purchased a transceiver. After much research, we decided to go with the ICOM Ic-V8000. For the cost, it has exactly what we need. On Friday, we're going to be integrating it into our setup, and doing all the necessary testing.

This contact was no big deal really. When I was talking to Norm Thagard on MIR station back in the 20th century, there was one 13 year-old kid in South Africa who pulled off the same feat.
See: http://www.gadgeteer.us/MIR18.HTM If they had actually built the radios themselves it would have been a bit more noteworthy. Looks like this one had more PR smoke than solder smoke.

RADIO PIONEER: GROTE REBER

Grote Reber has always been a hero of mine. Above you can see the dish that he built in his backyard to conduct radio astronomy in the 1930's.
Read more about OM Grote here: http://www.nrao.edu/whatisra/hist_reber.shtml

SolderSmoke NUMBER 100

http://www.soldersmoke.com

SPECIAL CENTENARY EDITION
A look back to the beginning
Rome Travelogue:  Palatine Hill
Fixing my old freq counter: Trials and Tribulations
Empire of the Air:
  More great history, but more tech faux pas
  "The radio art" 
  An historical precedent for our GONG 
  Lake DeForest? 
  A. Frederick Collins
Understanding Beta Independence 
Understanding Feedback and Distortion
SPRAT 137: Minimalist Radio:
  The FETer/ET-1: "Haiku from Solder"
  Regens: Not for the faint of heart
NEW: THE SolderSmoke STORE: T-shirts, Mugs...!
MAILBAG: 
Shawn N3ZHP new to Knack, wants to build ALL his gear
Steve WB6NTL on hippie origins of "Snort Rosin"
Scott AC0GG recommends new mic, equalizer
Jim AL7RV going QRSS mobile. Can we find him? 
George K8VU on kid busted by FCC
Craig KC2LFI helps with SS s sounds 
David KB1BED says SolderSmoke driving up Drake 2-B prices
Steve G0FUW "Ten DSB rigs built in cloud of aromatic 60/40"
Brian NF0G HBing at -20F  Comet Lulin coming
Tony G4LLW Freq standards, IC extraction, Arc transmitters
Kevin AA7YQ listened to SS while on parachute mission 
Graeme ZL2GDN building for DSB and QRSS
Stu N6TTO has new FSK QRSS beacon 10140060 
Mark K6HX (has great "Brainwagon" blog) lost SSDRA
Robin AF1RE Heard BITx20s on the air, now is building
Gerry EI8DRB has his 2B
Ray M0DHP has a strange aromatic solder experience...

My ET-1 / FETer (Transceiver Made with One FET)

Magnificent, don't you think? This is my version of the ET-1 or FETer. It is an HF transceiver using only one active device -- a single MPF-102 Field Effect Transistor. I didn't have a 4 pole Double Throw switch in the junkbox, but I did have a 4PDT relay, so I used the relay. So far I have only built the receiver. It is working nicely. I was listening to German and Polish stations on 80 meter CW this morning.

I had always wanted to build W2UW's ET-1... I've been reading in "Empire of the Air" the inspiring account of Armstrong's invention of the regen receiver... Then, along came SPRAT 137 and G3XBM's FETer. I could no longer resist. Solder was melted.

It is great fun to listen to 80 meters and realize that the only thing between you and the ether is one small FET (you can see mine standing proudly atop the relay!) . Its a lot like using a crystal receiver. That one FET is serving simultaneously as an RF amplifier, mixer and BFO!

On to the transmitter! Thanks to OM Armstrong, to Glen (W2UW), and to Roger (G3XBM).

Minimalist Radio: The ET-1 and the FETer

SPRAT # 137 (Winter 2008-2009) has a number of great articles on minimalist radio -- very simple rigs with low parts counts. Roger G3XBM has a very nice re-make of the ET-1, first introduced by Glen Yingling W2UW in SPRAT 108. I remembered Glen's article -- I always wanted to try it. The ET-1 has just one active device: an MPF-102 FET. And it is a transceiver.
The schematic of the ET-1 appears above. I started building mine yesterday. Got the receiver done and --- WOW! -- heard some 80 meter signals this morning. More to follow...

The SolderSmoke Store: T-shirts, Caps, Mugs, Bumper Stickers, MORE!

http://www.cafepress.com/SolderSmoke

A while back, a SolderSmoke listener suggested that we open up a T-shirt store. That was a good idea. Here it is! The SolderSmoke Store at CafePress. We design the items, CafePress does most of the work, and a portion of the revenue will help keep the podcast and blog going.

Right now we have T-shirts, sweatshirts, mugs, hats, and some bumper stickers.

We are open to suggestions: If there is something SolderSmoke or homebrew or QRP-related that you would like see on a T-shirt, coffee mug, hat, etc., drop me a line and we will see if we can fit it in with our fine line of Knack-wear!

Here is the link to the store:
http://www.cafepress.com/SolderSmoke

My Frequency Counter. FIXED!

I mentioned my broken frequency counter... Tony Fishpool, G4WIF, of G-QRP sent me a replacement CMOS chip. The counter is now counting beautifully. It was a real chore to get the bad chip off the double-sided board, then I doubled my work by putting Tony's chip in upside down. It doesn't work very well that way. I did another chip extraction. By this time I had all kinds of lifted pads, broken traces, pins on the verge of breaking. I felt sure that all the heating and de-soldering had destroyed the CMOS. But no! It lives!

This was a very satisfying troubleshoot and repair. I feel like Dr. House. The whole thing was made even nicer by the fact that the repair part came from the junkbox of a friend. Thanks Tony!

Looks like the old counter is still well-calibrated. It has my QRSS sig at 10140070. ON5EX's grabber puts me at 10140050. So the counter is 20 Hz high. Not bad for flea market junk.

A. Frederick Collins - Radio Pioneer from my Hometown

I've been reading "Empire of the Air" by Tom Lewis, and I've been struck by how much radio history took place in the Hudson Valley. I have a special interest in this, because I grew up there. As I was reading about Lee de Forest (BOOO! HISS!) I started wondering if the lake near my parents' house was named for him. I grew up near Lake de Forest. Surprisingly, Google and Wiki did not provide the answer (anybody know?), but in the course of my Googling, I discovered something that really surprised me: my little town was the summer home of radio pioneer Archie Frederick Collins (what a great name!). Collins was one of the pioneers of radio telephone, using arc transmitters to send his voice out over the airwaves. Some of the experiments took place right in dear old Congers, N.Y. Collins seems to have been a great guy -- in addition to his pioneering work in radio, he was prolific author, writing for the Knack victims of the day.

Here's a 1908 Scientific American article about his radio work:
http://earlyradiohistory.us/1908col.htm
Here's a good Wiki article on him:
http://en.wikipedia.org/wiki/Archie_Frederick_Collins

One quote from the Wiki: He wrote scientific adventure series novels such as "Jack Heaton, Wireless Operator(1919)" which told of the training and adventures of a 15 year old wireless amateur. Many of his books, such as "The Boy Scientist," (1925) had lots of illustrations and few equations, with an emphasis on "hands-on" experimentation, at a level intended for high school students. After discussing the "Einstein Theory," Collins tells his readers how to build a spectroscope, a radio, and a x-ray machine for home experimentation. Collins encouraged his readers to use their home-built x-ray machine to examine their own bone structure with a fluoroscope.

Degenerative Feedback and Distortion Reduction

Continuing on negative feedback, on SolderSmoke I recently asked for help in understanding why negative feedback is said to "reduce distortion." Let me know if you think I'm on the right track. Thanks to all who sent e-mails.

Following Fourier’s advice, let’s think of distortion as an additional waveform riding along with our desired signal. In the diagram we have a 5X voltage amplifier with 20 mV at the input, let’s say that it produces a complex distorted waveform that consists of our desired 100 mV sine wave, along with an ugly 10 mV distortion signal.

The feedback network takes 10 percent of both signals and feeds them back to the input (with a 180 phase shift). At the input, for the desired signal, the 10 mV of feedback meets up with 30 mV of input signal (as in TM 11-455, I’ll keep outputs the same, but increase inputs); we end up with 20mV at the input to the amplifier device. This then goes through the 5X amp and we get our 100 mV output.

But look what happens to the ugly distortion signal: It arises IN the device. When the feedback portion of this distortion gets to the input, it does NOT meet up with an input signal. It just goes back through the amp. So the feedback network takes 10% of the 10 mV distortion, introduces a 180 phase shift and sends this 1 mV waveform through the 5X amp. At the output of the amp we can think of the original 10 mV of distortion combining with what is now a 5mV out of phase signal. In this case, half of the distortion signal is canceled. We can say that compared with the no-feedback amplifier, distortion has been reduced from 10% to 5%. We can say that this circuit discriminates against distortion signals that arise inside the device. The desired signal meets up with the input signal, cancels a portion of it, but then the remaining signal goes through the amp producing the desired amplified signal. But the distortion signal has nothing to meet at the input. It just goes through the amp and then cancels a portion of distortion signal at the output. More desired signal, less distortion.

Busted... By the FCC

When I was a kid, I lived in fear that one day men in black suits from the Federal Government would appear on the front steps of our house in Congers, NY. I worried that they would discover some harmonic from my Heath HW-32A doing something awful to air traffic control comms.... or perhaps they would want to check my log book (that would have definitely resulted in jail time).

George, K8VU, sent along this link to an article about a kid who DID get a visit from the FCC:
http://www.rwonline.com/article/72138

The Radio World site seems to have a very nice collection of articles. Thanks George.

The Power of QRPp with QRSS (very low power, very low speed)

Here is a screen-shot taken in New Zealand back in 2006 (ah, the good old days, back when we still had a few sunspots). Colin, G6AVK, describes what you are seeing:

Hi Knights,
Whilst looking through some 30m captures this evening I thought it good to
share this with you, the Capture was from Mike ZL4OL back in early 2006.

Stations in this Capture listed from Top to bottom:
(675) G6AVK JO01HO sawtooth, 10mW into the Longwire.
(660) I0SKK JN61GV 25-30 mW max. Vertical R7 30 m high (on the top of the
roof)
(635) G0UPL 360mW. Antenna: full size half-wave dipole (14.2m) in the Attic.
(620) IW0HK JN61FV, 20mW's, Antenna used was a "Fishing Rod" vertical, 7.5
meter high.
I am looking forward to when Condx will be like this again.
73 Colin
G6AVK - JO01ho

Beta Independence (an explanation from 1941)

We've been talking about why negative feedback renders irrelevant even large variations in the gain characteristics of individual tubes and transistors. As is often the case, I had to go through several technical tomes before I found a book that really answered my “how does it really work” kind of questions. Enlightenment on negative feedback came to me from the days before Pearl Harbor, from War Department Technical Manual TM-11-455 “Radio Fundamentals,” published on July 17, 1941.

Figure 1 shows an amplifier that increases the input voltage by a factor of 100. In Figure 2, 10 percent of the output voltage is fed back – out of phase – to the input. Now, when trying to understand feedback amps, you can find yourself trying to figure out how changes to the input produce changes to the output, which in turn produce changes at the input, etc. Like the amplifier you are trying to understand, you become like a dog chasing his tail! TM 11-455 elegantly breaks this cycle. It has us think this way: Assuming we maintain 100 mV at the output, with 10% fed back, how much of an input signal will we need? Well, the amplifier itself still amplifies voltage by 100. So we still need a net voltage of 1 mV at the input. So now we need a signal voltage of 11 mV to produce the 100 mV output (Figure 2). The feedback cancels 10 mV, putting 1 mV on the input. Negative feedback reduces gain.

How does negative feedback reduce the impact of variations in the gain characteristics of the individual devices? Without feedback, if we substituted our 100X amplifier for a device with a gain of only 50, our 1 mV input would produce only 50 mV out, possibly playing havoc with our overall design. We’d need an input of 2 mV -- a doubling of the input voltage -- to make up for the variation, to get our desired 100 mV output. But look at the situation with feedback (Figure 3). We still assume 100 mV at the output, and 10 percent negative feedback. But now, even though device gain has dropped from 100 to 50, we only need an increase in signal input from 11 mV to 12mV. With this feedback arrangement, if we kept the input signal level at 11mV, and then used a transistor that happened to have only HALF the voltage gain of the original device, the output voltage would drop only to around 92 mV, a drop of about 9% -- not the 50% drop we saw in the circuit without feedback. Negative feedback reduces the impact of gain variations from device to device. It makes our amplifier stages more “beta independent.” Negative feedback reduces the impact of gain variations from device to device. It makes our amplifier stages more “beta independent.” Our thanks to the War Department!

SolderSmoke 99

SolderSmoke99.mp3

January 18, 2009
Epiphany in Rome -- La Befana brings two Gerbils (Dot and Dash)
Ice skating near (but not on!)the Tiber
QRSS: Eldon's beacon spotted. 723 miles with 15 millwatts
QRSS Calibration Problem: My proposed solution
A Tale of Two BENELUX Grabbers: ON5EX and PA1SDB
Watching VK2ZAY cross Tasman Sea. Watching G6AVK reach VK6DI
Inspiration from old SPRATs: From PA3BHK and W7ZOI
Book Review: "Empire of the Air" (Good bios, but author Knack-less)
AA1TJ's CFL revolution reaches Cuba. Now a CFL receiver.
AA1TJ's "Reggie" converts all sigs to QRP!
Several new videos on the Blog (from WA7MLH, N0TU, KD1JV)
MAILBAG: Ragav VU3VWR has Knack since 9th grade. Wants to QRSS in VU
Nick M0NJP likes show, getting used to the voice, Amazon UK instructions
Bryan VK3HXR has eeePC running Ubuntu
Paolo IK1ZYW has external keypad chips for FT-817 (available at cost)
Jim AL7RV's wife thought SolderSmoke gave him a fit. Agrees on 1)design 2)build
Wes W7ZOI on feedback circuits
Joe Rocci has an LtSpice model for the NE602
Gerri EI8DRB asks if he should buy a Drake 2-B (Uh... YES!)
Steve "Snort Rosin" Smith : SMT paste lacks bouquet of 60/40 multi-core
Chris KC2LFI prescribes 3500 Hz notch for sibilant SS problem (advice followed)

Homebrew Rigs from WA7MLH

Jeff Damm, WA7MLH, was the builder of some of the rigs that appear in "Solid State Design for the Radio Amateur" His DSB/CW Direct Conversion receiver for 75 meters is in that book. Last January, Jeff put together a video that describes some of the rigs and pieces of test gear currently in his shack. Beautiful stuff.

International Year of Astronomy -- 2009

Hey, the signals are electromagnetic. They are very QRP. And the receivers (well, at least the "amplifiers") are often homebrew. It's 400 years since Galileo spotted Jupiter's moons. To commemorate this, we have IYA2009. The organizers are developing a program to allow people to build their own simple telescopes, and are encouraging those who already have 'scopes to get out and let their neighbors take a look at the wonders of the universe. We did a bit of this "sidewalk astronomy" in London. We'll do our part for IYA2009 by taking our 6 inch Dobsonian out into the piazza here in Trastevere. Check out the project web site:
http://www.astronomy2009.org/globalprojects/cornerstones/galileoscope/

RADIO PIONEER: HAROLD BEVERAGE

I came across this interview with Harold Beverage, inventor of (among many other things) of the antenna that bears his name. I liked his description of the personalities and design methods of some the people he worked with (including Ernst Alexanderson).
Take a look: Beverage IEEE interview

Eldon's Beacon: GRABBED!

Last week we put out an all points bulletin for the new QRSS beacon of OM Eldon (scroll down a bit). Yesterday the signal was captured by Stu. Distance covered: 723 miles. Eldon's power out: 15 milliwatts. That's correct: fifteen milliwatts (Eldon had earlier calculated 150 milliwatts, but this turned out to be incorrect). Above is Stu's screen shot -- you can see Eldon's FSK signal: WAOUWH (read along the top of the square wave) at around 10140050 Hz.

Here is their e-mail exchange:

Re: Is this your QRSS beacon?
Tuesday, January 13, 2009 6:17 PM
From:
"Eldon"
To:
"Stu"
Thanks Stu, and thanks to Bill Meara and SolderSmoke.com
This is my my FIRST confirmed QRSS report from my first QRP rig, it is about 150mw into a North South 6 foot Loop about 6 feet AGL.
You represent it on about the freq that I think it is - without too much calibration on my part.
See: http://qth.map.googlepages.com/?qth=CN97BV43TU&from=CM87vk
Is your Grabber online?
Thanks for the report.
Regards, Eldon Brown - WA0UWH
Don't let the Zero land call fool you, I got it many year ago while in the Navy stationed at Denver, now located in Seven land near Seattle.
eldonb@ebcon.com

On Tue, Jan 13, 2009 at 12:39 PM, Stu wrote:
Eldon,
Copied the following screen shot on 30m today a few minutes ago – I think the FSK is your callsign – WA0UWH?
Copied with Spectrum Lab in CM87vk – TS-B2000 with 160m inverted L plus antenna tuner to load up on 30m
73's
Stu

KD1JV's Surface Mount Video

OK SolderSmoke fans, here's a video for YOU! Steve "Melt Solder" Weber has put out his first video. It is about surface mount soldering. It is all very interesting, and some actual solder smoke is released, but I was a bit disturbed when Steve put the PC board on an electric stove and then started using this purple thing that looked and sounded like a hair dryer. Made me yearn for my Weller soldering gun. Great video Steve, thanks!

The QRSS Calibration Problem: A Proposal

Eldon's effort to be seen by the 30 meter online grabbers (see below) reminded me of the big problem I faced when I first built my QRSS beacon: getting my signal into the very narrow (100 Hz wide) QRSS frequency band. If you think crystal control will solve this problem, think again: Almost all of us are using crystal-controlled transmitters, but circuit and component variations can easily put your signal far outside the freq range that the grabbers are watching.

I was able to get into the band because I was able to find a conventional CW beacon fairly close in frequency to the QRSS band. I used IK3NWX on 10.141800 MHz. Knowing the frequency of this beacon (it was avalable on the web), I used the ARGO and Spectran soundcard programs to put my sigs where I wanted them to be. IK3NWX was useful because it was so close (within 2 Khz) to the QRSS band -- I was able to put both the NWX signal, and my target freq on the screen. Later, I built my "DaVinci Code" reference oscillator -- it serves as a freq reference that I can use (again, with Spectran) to get back in the band after working on my transmitter (for those times in which I can't hear IK3NWX).

It seems like a lot of guys in the US and Canada are now getting into QRSS. Many may face the same frequency calibration problem. Are the frequency readouts of the ubiquitous Kenwood/Icom/Yaesu rigs accurate enough to help? Do they go down to the tens of hertz range? I suspect they do not.

What new QRSS ops in the U.S. and Canada might need is the North American equivalent of IK3NWX's beacon. It should probably be fairly high powered (but 5 watts would probably do the trick). Conventional CW would be better than QRSS (it needs to be heard). The frequency should be outside but within 1-2 kHz of the upper or lower QRSS band edge. A station out in the Great Plains would probably be able to serve the large ham populations of both coasts. Perhaps we could arrange for the calibration beacon to be on at certain times (daytime on the weekends?). Of course, the key would be to employ a station with very accurate frequency measurement ability (down to 1 Hz) and a highly stable signal.

What do you guys think?

Eldon's QRSS Rig

Eldon, WA0UWH, says the podcast inspired him to build some QRSS transmitters for 30 meters. His first effort was atop a 9 volt battery. The latest version has a more traditional enclosure. Eldon hopes to be seen on some of the grabbers -- please help him out if you can. In my case the hard part was getting the transmitter into the frequency band for QRSS (only 100 Hz wide!).

N0TU's Straight Key Night Video - 5 STARS!

Steve, N0TU, has put out a really great video on his Straight Key Night operation. It is really well-done. I was delighted to see both a Drake 2-B and a Heath VF-1 in use in Steve's shack. The video also has clips and photos from the stations Steve contacted during the event. Wow, a homebrew Spider! I remember that one from a 1993 issue of 73 magazine. You guys will love this video. Check it out: http://www.youtube.com/watch?v=aAk7gRdwpGs

Mars Rovers Complete 5 Years on Red Planet

There is a very nice NASA video here: http://www.jpl.nasa.gov/video/index.cfm?id=795#

SolderSmoke 98

http://www.soldersmoke.com

January 4, 2009
New Year's in Rome, Fireworks, Abruzzo snow trip.
AA1TJ and the compact fluorescent bulb rig; "Michael the red-nosed Rainey, you'll go down in history!"
Billy's Asus eeePC : Amazin' piece of gear.
The Lure of Logic: Fixing my old Global Specialties counter (chip needed).
The Joy of Troubleshooting.
N3ZI's FB counter.
Balsa boxes.
Todd, VE7BPO, also getting logical.
Hans, G0UPL, back on 30 meter QRSS from London.
Lawrence, KL1X grabbing VK QRSS sigs in N. China.
My sigs steady in ON5EX grabber.
Dan's deals.
Book of the week: "Empire of the Air." Armstrong as a teenage ham.
MAILBAG:
Todd K5TAK on new name for Knack (no!)
Rick KC0PET has new 'scope, analyzer, Elsie
Bill N8ET Kanga USA getting going again.
Alan WA9IRS on Pete Millet's free online tech books
Wayne VA7AT on SDR
Frank VK2AKG is NOT the solenoid musician
Bill N3HQB was in Ade Weiss's summer camp ham class!
Roger K7RXV on shaving resistors
Dino KL0S on other free books on-line
Gareth G1DRG on BBC Digital Planet Podcast
Tim Walford's FB ham construction magazine
A word about words from our sponsors

Homebrew Receiver from KC9KEP

Nice workmanship on this RX!

My 75 Meter "Kickpanel" DSB Rig

I've been talking about it so long, I thought I should let you guys have a look at it. The box on the top is N3ZI's FB freq counter. It sits on the top cover of the TX -- the cover is made from the side panel of a dead computer that I found on a street in London. The metal cabinet is a "kickpanel" -- the kind of thing they often put on the bottoms of frequently used doors. Mine was purchased at Farmer Brother's Hardware on Fulham Road, London. One switch is for T/R. The other is for spotting (netting). I put the LED in there so I wouldn't forget to turn it off (and because Billy likes LEDs!) Circuit diagrams and LTSpice models appear in previous blog posts.

Moving inside, we see that the "chassis" is actually a kitchen cutting board, this one from a Dyas store in Windsor, England. In the lower left there's a board with the AF (mic) amp. Center front is the VFO box (elevated above the main chassis by wooden blocks in order to put the tuning cap in a comfortable position). The balanced modulator is on the left. The long rectangular board in the center-right is the 4 stage amplifier. Note the black wire suspended above the connectors -- that's an antenna for the oscillator -- it allows me to hear the oscillator signal with my Drake 2-B while in "spotting" mode (while putting the TX and the RX on the same freq.)

HAPPY NEW YEAR FROM ROME!