Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, December 13, 2015

N3FJZ's New Blog and Impressive Rigs (and a Bandscan!)



Rick N3FJZ and his Lakeside direct conversion receiver bolstered my spirits when I was getting some harshly critical reviews of my signal on 40 meters a while back.  Rick happened to pick me up with his homebrew receiver. The Radio Gods seemed to be trying to balance things out.  There is a LOT of radio mojo in Rick's Lakeside receiver.  Not only does it eschew digital synthesis of the VFO signal, it goes a step further and uses a permeability tuned oscillator -- very cool.  The component and material sourcing adds more luster to the rig.  Rick writes: "A lot of the components used to construct the LS-40 were harvested from discarded consumer electronics I collected back in the 1980's. The base substrate material for the Manhattan style construction, as well as the RF tight enclosure for the PTO, is made from a flattened out tin plated food can. All components are discrete; i.e. no IC's or CPU's."

Rick has launched a blog.  He has some amazing stuff on it.  Be sure to check out his ZX-SSB rig.  Amazingly detailed documentation Rick!  Thanks. 

Find Rick's Blog here:
http://www.remmepark.com/circuit6040/

Saturday, December 12, 2015

YAMMM! Yet Another Michigan Mighty Mite! From KC0ZIR in Northern Virginia


Bill,

Thank you for the podcast and the loads of tribal knowledge from you and Pete! I recently started going through the SolderSmoke backlog, and I am just getting to the Colorburst Liberation Army episodes. I had some crystals for 40m laying around, so I started reading up and winding on a film canister.

Later, I thought I'd hop up the current episode of the podcast while I work, and I heard you guys talk about another push for the Michigan Mighty Mite. I happened to be salvaging bits from an recycling-pile VCR at the time, and I came across this crystal with a familiar label: 3.579545. The radio gods have spoken, so I will be winding a new coil for 80m.

I heard you mention the anonymous benefactor, but I have some aluminum foil, and I plan to brew the cap as well, there are a few options here: http://www.instructables.com/howto/variable+capacitor/

I thought I'd tell you a quick story anyway, because I just want to be a part of the fun. When I was little, our radios all had retractable antennas, and the TVs all had rabbit ears or loops. I would spend nights trying different materials and orientations to try and get better signal. At one point, I ran as much wire as I could in my brother's room (he had a big garage-sale cabinet tv), and we were getting channels from all over the place. We knew when each channel would be showing reruns of Star Trek, so we could catch an episode or two almost every day of the week. We even got some channels that I thought were only available on satellite. I had read in my box of Popular Mechanics magazines that some dish setups re-broadcast their signal on VHF/UHF frequencies with low power, I always suspected that's what we were picking up. 

I didn't know much (or really anything) about the theory behind antennas at the time. I'm still a bit hazy, like with the 75 ohm / 50 ohm cable thing. I thought resistance was a function of length, how can different lengths of coax be the same ohm rating?

Anyway, I just wanted to let you know I'm new to homebrewing, and you guys are a big part of that!
73,
Dan, KC0ZIR
Northern Virginia (a little to the left of you, it sounds like)
..............................

Excellent Dan! 

Getting the 3.579545 MHz rock out of a dead VCR definitely adds mojo to the rig.  Indeed, TRGHS! Thanks for sharing your Knack Story.   I hope to meet up to you, perhaps at the hamfests of Northern Virginia.  In my capacity as Grand Poohbah and Arbiter of Capacitor Eligibility, I hereby deem you  ELIGIBLE for a variable capacitor.   Our secret benefactor will be contacting you.  

73  Bill   



Thursday, December 10, 2015

YS1RS's Salvadoran Tuna Tin and Drake 2B

Roberto YS1RS recently acquired a Drake 2-B and has some minor tech troubles.   I am sure Alan Wolke will come up with the proper diagnosis. (The receiver works fine on the standard bands, but not on the accessory bands.  He can hear the crystal oscillator working fine on the crystal frequencies, but the radio is for some reason deaf on all the accessory bands.)  

Above you can see Roberto's Salvadoran Tuna Tin. 

 Roberto Describes it: "Homebrew: The Tuna Tin 2 QRPp Transmitter (TT2) with 300 mW output power, 14.060 MHz (20 meters band), Crystal controlled, 13 Volts, CW-Only. As its name implies, its main chassis is a Tuna Tin Can.  In our case, it is a delicious and exotic Salvadorian made tuna in chunks, topped with Jalapeño Chile. "

Check out Roberto's QRZ.com page:

Roberto has an amazing collection of gear, much of it thermatron, some of it homebrew.  And he has only been on the air five years.  He is a true member of the International Brotherhood of Electronic Wizards.  His work takes him to some of the most difficult places in the world.  FB Roberto! 




Wednesday, December 9, 2015

W7YRV: 197 feet up, on a Homebrew Tower

I talked to  Roy W7YRV on 40 SSB last night.   He was running a homebrew linear.  His blog has a lot of information on his truly massive desert antenna system.

http://w7yrv.blogspot.com/

Tuesday, December 8, 2015

Jean Shepherd's call signs, a QSL card, and much more


I was listening to 160 meter AM yesterday  afternoon when I heard a familiar call:  K2ORS.   I knew that someone else had picked up Jean Shepherd's last callsign, so I knew that I was not listening to a CQ from the great beyond.   Turns out that K2ORS is now OM Warren Ziegler up in Massachussets. Warren is active on HF and 160 and also works with experimental low frequency transmitters.  He is a big fan of Shep.  I think Shep would be pleased that someone who melts solder has his old call.

Searching for Warren on QRZ.com led me to a site with an amazing amount of info about Shep, his callsigns, and his early days in ham radio:


We talk about Shep quite a bit on this blog.  Here are all the Shep blog posts:


Shep said that when, as a teenager, he got his ham radio license, he was so proud that he went around thinking of himseld as "W9QWN, a man of substance."  Indeed he was.

EXCELSIOR!

  

Monday, December 7, 2015

Daytime Occultation of Venus TODAY! LUNCHTIME (on East Coast)



Thanks to my Michael EI0CL for alerting us to this.  It will happen today, very conveniently at lunchtime on the East Coast of North America.  I may have to bring my Soviet binoculars to work.

Details here:  http://spaceweather.com/

It has already been a nice day for astronomy here in the wilds of Northern Virgina.  National Public Radio on Sunday alerted me to the fact that Mars is high in the pre-dawn sky.  Our friend Armand e-mailed alerting me to possible clear skies this morning.  The leaves are down and no longer obstructing my view of the Southern sky.  With my six inch telescope I got a very nice view of Jupiter and the four Galilean moons.  We are pretty far away from Mars at this point, so I could see no surface feaures, but it is always nice to see that distinctively red disk. And Venus is poised to disappear behind the moon.  

Good luck with Venus and the Moon.  Please send in reports. 

And speaking of occultations, check this one out (thanks to Farhan for the alert):


The moon passed between Nasa's Deep Space Climate Observatory and the Earth, allowing the satellite to capture this rare image of the moon's far side in full sunlight. We normally don't see this side of the moon. As the moon is tidally locked to the earth and doesn't rotate, we only ever see the one face from the earth. Awesome shot!

Sunday, December 6, 2015

New Rig: The FRANKENSTEIN Phasing Receiver

Here is my latest project.  I call it The Frankenstein because of the two BNC connectors that come off the side of the DDS oscillator box -- they look to me like the bolts on Frankenstein's neck. The square waves from the DDS LO also seemed to evoke Frank's bolts. There may be other similarities.  We'll see.

Here is the idea:  Phasing,  Direct Conversion, Image Rejecting receiver based largely on the R2 design by Rick Campbell KK7B  as presented in the January 1993 QST.

I'm using an AD9850 with an M0XPD Kanga board and an Arduino to generate the quadrature LO signals (you can see the square waves on the 'scope in the background).  I'm using the software of Richard AD7C;  this, combined with the divide-by-4 scheme on the Kanga board,  puts the upper limit of reception at 7.3 MHz.  That's OK for now. 

When I first fired up my AD9850 box I was dismayed to find that the square wave quadrature output was no longer there.  I was about to give up and get anther shield board, but this kind of surrender bothered me.  So I started troubleshooting and isolated the problem to the /4 chips. My soldering of the surface mount chips was, well, a bit dodgy, so I changed to a tiny soldering tip and reheated all those tiny little pads.  Hooray!  I fixed it. 

The receiver will be built mostly on a PC board that Pete made for me back when he was trying to convince me to build a fourth BITX receiver.  I am pleased to put the board to use.   See below.

Yesterday I soldered on the two SBL-1 mixers that will form the heart of this receiver.   I realized that the very robust quadrature square waves from the Kanga board might be robust enough to fry the sensitive little SBL-1s.  Sure enough, I measured about 17 dbm coming out of the Kanga board.   I threw together two roughly 10 db resistive pads.  These should prevent the SBL-1s from releasing their smoke.     

I hope this receiver will be four receivers in one:

1) Standard DC receiver.

2) Binaural Receiver!  Groovy, stereo CW that floats around in your head,  man! 

3) I-Q receiver that can be fed into the sound card of the computer for DSP, panoramic display, etc.   I promise not use it to find fault with the signals of homebrew SSB rigs.

4) SSB image rejecting receiver for easy, Direct Conversion SSB listening without the burden of having to listen to the other side of zero beat. 

There is already a lot of soul in this new machine:  Kanga board with the design my Paul M0XPD, PC board made on Pete's $250,000 CNC machine, and all of it on an actual breadboard (from Italy, I think).  

Rick Campbell and Peter Parker have commented on the allure of phasing rigs.  There is something very attractive about them.  There is a cleverness in the way this design exploits the phase relationships between sidebands to allow us to null out the unwanted side of zero beat.  It took me a while to really understand how this is done -- once I understood it, I really wanted to build a rig that would make use of this principle.    





Saturday, December 5, 2015

Alan W2AEW Hears me on 40 AM with his Drake 2B




Alan W2AEW writes: 

How appropriate! I was casually listening to 40m AM on my refurbished Drake 2B, and I hear the rotation get passed along to none-other than N2CQR - the man that got me excited about the 2B in the first place. FB 20 over signal in NJ, OM! I was able to grab the video camera quickly before you signed off.  Alan's video appears above.

73,
Alan W2AEW
Holy cow Alan,  THE RADIO GODS HAVE SPOKEN!  Clearly you need to get on 40 meter AM.  Maybe get a DX-60 or something.   In your video I spotted several items in your shack that are also in mine:  in addition to the 2B, I see  a Turner +2 transistorized microphone, and that little (very useful) RadioShack speaker. Glad you heard me OM -- thanks for the recording!
73 Bill

Friday, December 4, 2015

The Pleasures of AM, and The 807 (Truly a Bottle Worthy of the Gods)

Sometimes a message posted in the comments section of the blog is so good that it needs to be raised up and converted into a posting all its own.  Such is the case with a message that Rupert G6HVY sent us last month about AM and old rigs.  60 meters eh? Hmmm...

Rupert wrote:

It's always a pleasure to listen to AM QSOs, which hereabouts seem to be mostly on 80 and 60. I bought an FM board for my FT-101ZD with the intention of getting some 10m action, but now I think I'll leave the AM board in (you can't have both) for when I get the beast out of storage. AM, even AM that hasn't been optimised for beautiful audio, sounds so much nicer than SSB.

The other side of AM is to get old military rigs up and running, which is quite the opposite to the golden voice crowd. Another project waiting for time and energy here is an RCA-built Wireless Sets Number 19, which can put out ten watts or so of AM from its 807 (truly a bottle worthy of the gods) - and of course, there are infinite numbers of 50s and 60s vintage thermionic projects in the contemporary magazines. It would be particularly satisfying to find the original PSU for that, as it has two Dynamotors to convert the 24V DC supply to HT, with the transmitter one cutting in when the PTT (sorry, pressel switch) is hit. I say cutting, it actually runs up to speed over a couple of seconds, giving an original 19 Set a very distinctive slow fade-in at the start of an over. Hearing one of those crackling away on 5 MHz is utterly delicious.

Rupert, G6HVY

Thursday, December 3, 2015

Pete Juliano's Simple-Ceiver on Hack-A-Day Today!


Check it out!  Pete's awesome project -- and equally awesome documentation of the project -- is recognized this morning by Hack-A-Day! Congrats Pete!  

http://hackaday.com/2015/12/03/radio-receiver-build-log-and-more/ 

Wednesday, December 2, 2015

Colchester Mighty Mite


GM Bill,

So, I got round to making my Michigan Mighty Mite!

The crystal arrived almost safe and sound, thanks to the USPS’ mail crusher. Perhaps they think that because email and packets can be compressed they can do the same with parcels? (the photo really doesn’t do it justice - the orange area is a large dent…):


No 2 son, Cameron (12), got involved - The extremely neat tank coil is his handywork :


And so to the video: Not only does it oscillate on the correct frequency as shown here, it also has the added bonuses of oscillating around 21.5Mhz (which is the number my frequency counter gives - which caused a great deal of head-scratching on first smoke), and muting the FM broadcast receiver on 96.1MHz on the shelf 3 feet away!. The dummy load is the 3w metal film resistor suspended in mid air.


You might notice more resistors in the circuit itself than the diagram calls for. I chose to have 2 x  20K resistors in parallel to produce a single 10K resistance that could handle .6W. And the poor old 27R .3W resistor got really hot and discoloured before rapidly increasing its resistance ( !! ), so I used 4 (2 serial pairs in parallel) to handle the current. They still get hot, but survive. And the 2N2222a has a bulldog clip heatsink.

Please excuse the uncorrected error at the end of the CQ call!!

This is the second transmitter I have ever built - the other one is a 30m Hans Summers QRSS kit which you also get the ‘blame’ for :-)

Thank-you, Bill. Keep up the good work.

73’s de G7TAT, Colchester, England.







Tuesday, December 1, 2015

Pete's Simpleceiver is DONE! And it is a thing of beauty


Pete's Simpleceiver is a thing of beauty.  And it is done.  And people are already building it: Jim WA7HRG has one in the works.  Go to Pete's blog for more details, pictures, videos, LTSpice simulations etc.  http://n6qw.blogspot.com/  Congrats Pete! 



Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column