Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
I know this will have some of you thinking that I have been kidnapped or drugged or brain-washed (by N6QW!) or something, but the truth is I'm just being drawn in by that fascinating little color screen. This is the beautiful work of Rich, VE3MKC. He has also updated his blog and provided a very nice diagram and written description of all the I and Q action: http://rheslip.blogspot.ca/Thanks Rich!
“Anatomy of a Field Radio Kit” series on QRPer.com
-
If interested, I’ve now published both parts of my Anatomy of a Field Radio
Kit series over on QRPer.com. This series was originally featured in the
June a...
Solar Cycle 25 - Where Are We Headed?
-
This coming week might be a significant one for the progress of *Solar
Cycle 25*. Going forward, the next two months should give us a good
indication ...
JS8 Ragchew vs. Heartbeat
-
While monitoring JS8 on 40 meters I saw a QSO in progress that seemed to be
going nicely, a long “rag chew” in the works. You can imagine my dismay as
th...
Solid State Radios • Re: A simple superhet
-
In the simple receiver shown, the Si5351 CLKx outputs are connected to the
DBM LO port through an intermediate 10 nF or 100 nF DC blocking capacitor.
73,
...
HRWB137-HF-Wattmeters
-
In this episode, Doug, K6JEY, tells us all about various HF RF power
meters, how they work and what to look for when buying one.
AGC for a Termination Insensitive Amplifier
-
For AGC controlled IF stages in receivers I have often chosen a 2 or 3
stage dual gate MOSFET strip, or a cascode arrangement with a bipolar and
JFET pair....
Testing Audio Amplifiers
-
After finishing the microphone amplifier and the AF amplifier modules, it
is time to test them. For the experienced builder with scope and signal
gene...
Arduino Clock
-
Initial code using a 120x120 TFT display and a realtime clock module.
/*************************************************************************...
QLG2-SE GNSS/GPS Receiver kit
-
This GNSS/GPS receiver module kit is mostly SMD (pre-assembled), and
includes a high sensitivity active antenna with 2m coax and SMA connectors.
It has ...
More Projects with Telegram
-
*In the past years I had always blogged my projects, but due to time,
effort and format I had stopped doing that. But my projects continued,
and I have ...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
Modifications to the Dayton/FDIM-2019 Antuino
-
The Dayton Antuino has sub-optimal performance. This is a short note on
improving it to an 80 db range of measurements. The trouble with Antuino
2.0 (the o...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasicknes...
Posts
See Bill, the display is calling you to heat up the iron!!! Rich has done a superb job and it is a marvel at how well it works.
ReplyDeletePete N6QW