Re: Is the design feasibility of 160M 625W Class D transmitter?
-
Noticed your online...
The calaculator seems great...
Do you have the link...
Ohhh you just departed...
Wayne
1 hour ago
Serving the worldwide community of radio-electronic homebrewers. Providing blog support to the SolderSmoke podcast: http://soldersmoke.com
Solar X-rays: Geomagnetic Field: |
Hi Bill. 6 digits as shown gets you 10Hz resolution at the expense of overflow (10+MHz) or full freq down to 100Hz. 8 digits would get you full freq to 1Hz. Black area above knob - was that its previous spot? (can't recall)...
ReplyDeleteDex: Yeas but I found that I only really needed 100 Hz resolution. There was a lot of wobble at 10 and 1 Hz. It was annoying. In fact, I "turned off" the 10Hz digit with a piece of electrical tape! The black area above the knob is just a piece of Gorilla Tape on which I had affixed some Dymo sticker labels with the frequencies -- old school readout. 73 Bill
DeleteHi Bill,
ReplyDeleteThat is so cool looking and functional! Next we will have to get you moved up to the 128 X 128 TFT color display. Gentle goading here.
Pete N6QW