Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Yesterday my NanoVNA arrived. This morning I was looking for info on how to use it and I found this really wonderful video from Joe Smith. Wow. Joe gives a really useful intro to the capabilities of this amazing little device. He even reaches back in time and compares NanoVNA results with those obtained by a Millen Grid Dip Meter. He pulls out of his junk box an attenuator that is so old that it is marked in "Kilo-Megacycles." (Shouldn't we revive terms like that?) Joe also gives us a taste of what it is like to live and work in the GHz range. He warns us never to touch the SMA connectors on our NanoVNAs (too late Joe). And -- get this -- he uses a torque wrench to connect the little SMA coax connectors to the NanoVNA. I'm not kidding. A torque wrench. Joe connects surface mount capacitors and inductors that have their values specified not only in picofarads and microhenries, but also at the specific frequency at which they were measured. My understanding of the Smith Chart was greatly improved by watching Joe's video. Icing on the cake: Joe wraps up the video by using the NanoVNA to MEASURE THE SPEED OF LIGHT. Great stuff. Thanks Joe. Here is Joe Smith's YouTube channel: https://www.youtube.com/channel/UCsK99WXk9VhcghnAauTBsbg
Now I have to get the software to use the NanoVNA with my computer.
Have you all seen the price of SMA torque wrenches!
Fortunately for me, my son is buying a 3D printer. [I knew all that university money was well spent :-) ]
I have put my order in for one of DuWayne's clever alternatives to the pricey "proper" wrench: see: http://kv4qb.blogspot.com/2020/02/sma-torque-wrench-for-nanovna.html
The AntScope2 software is designed to support various models of RigExpert antenna analyzers for your Windows PC or Mac. Now it also supports the NanoVNA and is open Source
Bill, thanks for posting the video, I have been dipping in and out of it during the day. A fair bit of it is over my head but I will say that I learned more about these neat little tools in 30 minutes than in days looking at other stuff on the internet. Thanks again, 73, Tryg
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
April 19, 2024. An Audio Amplifier you can Build.
-
I find that data is very useful in making decisions. How startling a
statement to make on a ham radio blog. For instance, when I post subjects
about how t...
Gordon’s Simple AM-801 Alligator Clip Mod
-
Many thanks to Gordon (KF5JWL) who writes: Tom, I’ve been thinking about
this for a while and finally tried it. I attached an alligator clip to the
AM-801 ...
Re: Another vote for the LP100A
-
I have an LP100. Amazing meter.
Also have a powermaster and a few Birds, including digital Birds.
The LP100 (and powermaster) are always in agreement with...
No birds do sing
-
Hi FastRadioBurst 23 here letting you know of our forthcoming shows this
week. On Sunday 21st April 2024 at 0900/1300 hrs UTC on 6160 kHz and then
at 2000 ...
An Inline RF Step Attenuator for QRPp Work
-
I don’t need to explain the attraction of low power operation; if you’re
reading this, the chances are that you are already a convert. I’ve been
operating ...
Using an external clock with the RX-888 (Mk2)
-
*The RX-888 (Mk2) and external clocking*
*Figure 1:*
The RX-888 with external clock input *(right)*
The enable/disable switch is barely
visible behind the...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...
Have you all seen the price of SMA torque wrenches!
ReplyDeleteFortunately for me, my son is buying a 3D printer. [I knew all that university money was well spent :-) ]
I have put my order in for one of DuWayne's clever alternatives to the pricey "proper" wrench:
see:
http://kv4qb.blogspot.com/2020/02/sma-torque-wrench-for-nanovna.html
Bill he also does videos as IMSAI Guy - on YouTube.
ReplyDeleteThe AntScope2 software is designed to support various models of RigExpert antenna analyzers for your Windows PC or Mac.
ReplyDeleteNow it also supports the NanoVNA and is open Source
https://rigexpert.com/products/software/antscope2/
Bill, thanks for posting the video, I have been dipping in and out of it during the day. A fair bit of it is over my head but I will say that I learned more about these neat little tools in 30 minutes than in days looking at other stuff on the internet. Thanks again, 73, Tryg
ReplyDelete