Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label antennas. Show all posts
Showing posts with label antennas. Show all posts

Wednesday, September 8, 2021

SST -- QRP On The Beach


Up in a beach house on Cape Cod Bay in Massachusetts, I put the SST on 20 meters using an End-fed Half Wave antenna and QRP-guys tuner.  Conditions were pretty bad, with solar storms causing disturbances in propagation, but I did manage to get picked up by RBN skimmers in Iceland, Germany and Italy (see below).  And I had one nice QRP-QRP contact with DK4AN.

I was having trouble getting out until I used the oar to raise the central portion of the half wave antenna -- that's where the current is. 

Thanks again to Bob KD4EBM for sending me the SST.  




Monday, June 14, 2021

Santo Domingo Shack on 12th Floor Balcony -- SST QRP CW


June 2021.  We were in Santo Domingo, Dominican Republic.  At this point we were in a 12th floor apartment in the center of the city.  I would take my SST 20 meter CW transceiver and EFHW antenna out on the balcony.  I made no contacts from this location, but one of  my CQs was picked up by K9TM on the Reverse Beacon Network (see below).  All the other RBN spots were the result of calls from the eastern tip of the island. (Click on the RBN image for a clearer view.)



 

Sunday, May 30, 2021

QRP - QRP Contact from Dominican Republic



It took some brass pounding on my homebrew key, but on May 28, 2021 I made a real QSO from the eastern tip of the island of Hispaniola.  KJ4R came back to my CQ near 14.060 MHz. I was running just 1-2 watts from my SST transceiver to an end-fed half wave antenna. Ed KJ4R was in South Carolina running 5 watts, also to an EFHW antenna.  TRGHS.  Thanks Ed.  And thanks to Bob Scott KD4EBM and Wayne Burdick N6KR.

Saturday, February 20, 2021

A Step Closer to the Elser-Mathes Cup? Ham Receives Signals from Mars

 

That is the antenna that Scott Tilley VE7TIL  used to receive signals from the Chinese spacecraft Tianwen-1 in orbit of Mars.  In a recent SpaceWeather article, Scott comments on the importance of SDR receivers in these deep space reception efforts.  


I've been watching the Elser-Mathes cup for a long time. I dedicated my book "SolderSmoke  -- Global Adventures in Wireless Electronics" to my kids, Billy and Maria, noting that they were both possible future winners of this most prestigious award.  Scott Tilley's work has put us a step closer to an award ceremony for some intrepid radio amateur. 

Here is a good article on the Elser-Mathes Cup: 

Scott was in the news last year for finding a zombie satellite: 


Saturday, December 19, 2020

A Very Clever Way to Build a Moxon for 17 and 20 meters



Jim AB9CN sent us Dan Zimmerman N3OX's page in response to my plea for help in SolderSmoke #227.   I think this is a very clever and attractive way to cover both bands with a single Moxon.  

http://www.n3ox.net/projects/2017moxon/

Of course there are other ways to do this -- other listeners wrote in with confirmation that it is indeed possible to nest a 17 meter element inside a 20 meter Moxon (as is done routinely with Hex beams), but this requires a lot of cut-and-try tuning of both antennas.  More in this in future posts.  Thanks Jim, and thanks to all who wrote in. 

I kind of like the N3OX approach.  I think his design makes it more of a workbench electronic project, as opposed to a mere wire and coax antenna project. But hey, that's just me. 

Saturday, December 5, 2020

Adding 10 kHz of Coverage to My BITX 17

 
Solar Cycle 25 is underway.  The Solar Flux Index and Sunspot numbers are up considerably.  I have dusted off my old BITX17 transceiver.  This time around I am using it in conjunction with a waterfall display provided online by NA5B's KiwiSDR receiver, which is located about 9 miles east of me. This SDR receiver allows me to see the entire 17 meter band.   It was this panoramic display that made me pay more attention to the fact that the Variable Crystal Oscillator (VXO) that I am using in this rig prevented me from tuning the lower 10 kHz of the 17 meter phone band (18.110 -- 18.120 MHz). 

I use two crystals switched by a relay to cover the band. One is at 23.149 MHz, the other at 23.166 MHz.  The crystal filter is at 5MHz.  With a coil and some caps I could move the frequencies of the oscillator enough to cover 18.120 to 18.168 MHz (top of the band). 

When I first built this thing, I kind of wrote off the lower 10 kHz of the phone band.  I couldn't get the oscillator to work that low, and I was already satisfied with the top 48 kHz.  But the NA5B waterfall often showed SSB stations in that lower part of the band.  I wanted to talk to them.  So I started thinking about how to do this.       

Looking at my schematic (above) I remembered that most of the frequency lowering was done by L1, a 3.2uH toroid.  I figured that to go a bit lower, I would just have to add inductance.  But I didn't want to lower the frequency provided by BOTH crystals -- I just wanted to bring the frequency with the lower crystal down a bit.  

In my junkbox I found a 1 uH coil.  I disconnected the lower lead of the 23.149 MHz crystal from its connection to the relay.  I soldered the 1 uH coil between the crystal and the relay (see picture above).  This moved the lower limit down to 18.087 MHz. 

Now crystal one provides 18.087 - 18.144 MHz 
         crystal two provides 18.137 - 18.167 MHz

So now I have the whole phone band.  Bob is my uncle. TRGHS. 

This was a very quick and satisfying little fix. As Pete says WYKSYCDS: when you know stuff you can do stuff.  Indeed.  And as I re-build and repair gear that I built years ago, I am often reminded that as time goes by, we learn more. We end up knowing more and being able to do more.   

I am also planning on rebuilding my 17 meter Moxon;  this time I will make it better and stronger.         

Friday, December 4, 2020

The Terrible Collapse of the Arecibo Dish: Climate Change, Hurricane Maria, and Funding Cuts. Also: China's New Dish

From https://www.thewrap.com/watch-crazy-footage-of-the-arecibo-observatory-collapse-goldeneye-video/  :

"Alas, over the 2010s it was battered by a series of severe, climate change-linked tropical storms and hurricanes, culminating in terrible damage inflicted by Hurricane Maria in 2017. Unfortunately the 2016 election led to a government unwilling to fund repairs. Though new sources of funding were cobbled together late in 2018, in late Nov. 2020 it was determined there was no way to safely repair the telescope and the National Science Foundation announced it would be decommissioned.

The decommissioning was supposed to proceed after NSF determined the safest possible method, but physics had other plans. So it is that on Dec. 4, the whole thing up and collapsed with almost no warning."

More info (from NSF): 

https://www.nsf.gov/news/special_reports/arecibo/index.jsp

Here is a good 2017 article that discusses the electronic and mechanical arrangements at Arecibo, and the budget cuts it was facing.  The article seems to almost predict the collapse: 

https://www.imeche.org/news/news-article/arecibo-funding-cuts-threaten-future-of-giant-radio-telescope

Here is a comment from someone who worked there and heard the collapse: 

Jonathan Friedman, who worked for 26 years as a senior research associate at the observatory and still lives near it, told the Associated Press news agency of the moment the telescope collapsed on Tuesday.

"It sounded like a rumble. I knew exactly what it was," he said. "I was screaming. Personally, I was out of control... I don't have words to express it. It's a very deep, terrible feeling."  https://www.bbc.com/news/world-us-canada-55147973?fbclid=IwAR3RuwzTfJmqInrOOFB-nctknDzyB_VSr_qdNrjg9LbbxUnAbynKBv9stPQ


Here is an interesting WIKIpedia article on China's FAST dish, with comparisons to Arecibo: 

https://en.wikipedia.org/wiki/Five-hundred-meter_Aperture_Spherical_Telescope#:~:text=The%20Five%2Dhundred%2Dmeter%20Aperture,County%2C%20Guizhou%2C%20southwest%20China.

Comparison of the Arecibo Telescope (top) and FAST (bottom) dishes at the same scale


Adios Arecibo

Friday, November 27, 2020

6EQUJ5 -- SNR, the Big Ear Radio Telescope, and the "Wow" Signal

https://hackaday.com/2020/11/25/the-wow-signal-and-the-search-for-extraterrestrial-intelligence/#more-448808

This Hack-A-Day article explains the significance of 6EQUJ5 on the paper readout of the Big Ear radio telescope.  It is a signal-to-noise readout. 

The article also has interesting information about the radio telescope that was used.  

I have on my shelf John Kraus W8JK's wonderful book "Big Ear Two -- Listening for Other Worlds."  John Kraus is the guy who built the Big Ear.  In a reminder of how new radio technology really is,  Kraus got his start in radio as a ten year-old boy in 1920.  He ripped the wire out of the ignition coil  of a Model T Ford to make a tuning coil for a crystal radio.  He took the earpiece out of the family telephone.  His father gave him a chunk of Galena.  He used the crystal radio to listen to the early broadcasts of WWJ in Detroit. 





Saturday, November 14, 2020

The Dish -- Virtual Tour -- New Indigenous Name


Thanks to Peter VK2EMU for this update on the Parkes radio telescope.  Parkes is the subject of our favorite movie about an antenna:  'The Dish."   If you haven't seen it, well, you are just wrong. 

The video update is very nice, with an interesting juxtaposition of old and new test gear.  

But the coolest thing that Peter sent us is the story of the Parkes Radio Telescope's new indigenous name: Murriyang in the Wiradjuri language: 


Thanks Peter. 

Wednesday, October 21, 2020

Listening in on the Deep Space Network

 

Not long ago we took the DISH satellite antenna off our roof.   For a while I resisted pleas to put the big thing on the curb for pickup.  I fantasized about using it for radio astronomy.  In the end, I threw it away.  I do have VHF/UHF aspirations, but being able to use that dish just seemed to be something in my distant future (if ever!).  

But check out what David N2QG is doing with his dishes:  He is listening to very distant spacecraft normally picked up only by NASA's Deep space network.  Very cool.   Truly inspirational.  

Here are the links: 

http://www.prutchi.com/2020/10/15/recap-of-x-band-dsn-activities-and-plans-for-the-future/

http://www.prutchi.com/wp-content/uploads/2020/10/DSN_Lessons-_Learned_N2QG.pdf

Wednesday, October 7, 2020

Solar Cycle 25 - The Gleissberg Cycle Dashes Hopes for a Big Solar Max

 


In our last podcast Pete N6QW expressed pessimism about Solar Cycle 25.   I pushed back, asking Pete to stop with the negative vibes.  Well, as always, it turns out that Pete was right. 

Hack-A-Day today has a nice post about solar activity.  They note that cycle 25 is likely to be much like cycle 24 -- not great, certainly not as great as cycle 19.  Pete operated during that magnificent event -- I was born during cycle 19 -- TRGHS.  

While Pete was right about the poor prospects for cycle 25, I doubt that he knew WHY it will be so tepid.  Well friends, here is something else for us to worry about:  THE GLEISSBERG CYCLE.  This one is not 11 years long.  It is 87 years long and we are in the declining phase right now. So apparently it will be future generations of ham radio operators who will experience sunspots like those of 1959.  Curse you Gleissberg cycle!  

But I suppose it is better to light one candle than to curse the darkness.   Cycle 25 maximum is only about five years away.  So I'm thinking of rebuilding my Moxon.   Or maybe getting a Hex beam... 

Saturday, August 22, 2020

Very Cool Vosworx AZ-EL Satellite Tracker



When I was in the Dominican Republic working the RS satellites, MIR and the Space Shuttle, I didn't have an elevation rotator.  I could only move the antenna in the azimuth plane.  So I just aimed it about 45 degrees above the horizon, spun it around, and hoped for the best.  I also had no computer control of the azimuth heading -- I'd just watch the location of the satellite on my computer screen and operate the rotator control manually.  

This device is a big improvement. 

Saturday, June 27, 2020

SolderSmoke Podcast #223 Field Day, Club Talks, Patreon, NanoVNA, Farhan Video, SPRAT, BIG MAILBAG



SolderSmoke Podcast 223 is available: 


27 June 2020

Quarantine Field Day!   
Ironically, THIS YEAR we are both participating
Pete's FD Plan, Bill's FD plan 

Talking to Clubs: 
Pete's talk to the Cedar Valley Iowa Club
Bill's talk to the Vienna Wireless Society

Pete's Bench
DDC SDR
Ideas from the Summer SPRAT
Mean Well Voltage Regulator

SHAMELESS COMMERCE DIVISION: PATREON.   SS is an  SV DELOS WANA-BE!
We got our very first Patreon Patron!  Jonathan Magee from the UK!  Upper Left on the blog.
Continue to use our site for your Amazon purchases. 

Bill's Bench
NanoVNA
Understanding L Networks
+/- 6kHz Ceramic filter for Q-31
Lobes, Nulls and WSPR

Miscellaneous: 
Farhan's feedback Amplifier Video
British Antarctic Broadcast heard (sort of)

MAILBAG:
Mauro VA6BRO liked the SolderSmoke book.  Thanks Mauro
Tryg in Galway Ireland is listening.  Hope to get you the signed books Tryg. 
Michael N4MJR suggested that I use N2 Corona Quarantine Radio as my phonetics.  I dunno... 
Ed DD5LP has been helping us get SS rebroadcast on a German SW broadcast station. Stay tuned! 
Rogier PA1ZZ in California sent an e-mail about the Don Lee Broadcast System.  Thanks Rogier!
Rick KE3IJ  Silver Skirt on his 2B also. W3GOO did it.  Rick traded his Commodore 64 for the 2B.  Yea! 
Walter KA4KXX has a simplified circuit for the MMM!  From UK
Peter VE1BZI thank us for the tribal knowledge.  Dipolo Crilolo
Peter VK2EMU Wee need someone to make the Constructor Crusader badge. 
Scott KA9P sent us the Amateur Wireless cover from 1934 with the Constructor Crusader thing. 
John GM4OOU Built lockdown rig.  we want pictures! 
Jerry KI4IO  His version of the Sproutie by AA7EE   FB 
Adam N0ZIB built a MMM
Wouter ZS1KE in South Africa -- comparing notes on Drake 2-Bs
Randall KD5RC wants to get started in HB. 



Wednesday, June 17, 2020

Lobes, Nulls, and "Gain Dipoles" -- Testing the Theory with WSPR

In the last podcast Pete and I were discussing dipole antennas.  We mentioned dipoles that were multiples of 1/2 wavelength and said the result could be a "gain dipole."  This provoked some head scratching.  Listener Riley asked for more info. See the comments section under this post: http://soldersmoke.blogspot.com/2020/05/soldersmoke-podcast-222-antennas.html

A short time later Pete was corresponding with Brad WA8WDQ who had questions about his antenna pattern.  Pete recommended using WSPR to test his antenna's effectiveness. 

These two exchanges got me thinking about the radiation pattern of my 135 foot doublet antenna, especially on 20 meters.  Where are my lobes, where are my nulls?   Following Pete' advice I turned to WSPR.   But first, a quick look at the PREDICTED patterns.

ON5AU has on his site a great article by antenna guru L.B. Cebik  W4RNL with exactly the info I needed.  Above is W4RNL's chart of predicted radiation pattern for 20 meters on a 135 foot doublet.  Note the orientation of the wire.

My antenna is oriented almost exactly north-south (broadsides to the east and west).  So with a standard north at top map, my pattern on 20 should look like that of W4RNL's chart.  What did I get from WSPR?   Here is the pattern for an hour or so of 250 milliwatt transmissions from my station using the 135 foot doublet on 20 meters (using homebrew balanced tuner): 



You can clearly see at least three of the four predicted lobes (NE, NW, SW). 

Now, part of this WSPR pattern could, I suppose, be the result of the geographic distribution of WSPR stations.  If there are just more of them in the areas where I am seeing lobes, the pattern could just be the result of geographic distribution.   I don't think that is the case, but to test this idea (a bit) I decided to look at the 40 meter pattern.  

Here is what W4RNL predicted (same north-south antenna orientation): 



And here is the WSPR map that I got, again using about 250 milliwatts for about an hour): 


I think this pattern matches nicely with the prediction.  You don't see the nulls that you see in the 20 meter pattern.  You do see some stations directly north of me (as predicted).  There does not seem to be a big disparity in the geographic distribution of WSPR stations.

One note on the use of WSPR:  I started out using WSPR in receive mode, thinking that the pattern I'd see would be similar on receive or transmit  due to the antenna reciprocity principle.  But I worried that the results could be easily skewed by higher power WSPR stations.  So I shifted to the transmit mode and limited my output to 250 milliwatts. 


Here is the W4RNL chart showing the patterns for all the bands: 


Here is the azimuth chart for my location: 



Saturday, June 13, 2020

Jerry's Sproutie: A Short Wave Receiver (and a Limerick) by Jerry KI4IO


Jerry KI4IO is a really talented homebrewer;  I've called him the Wizard of Warrenton:  
and 

Warrenton Va. is not far from me (and is the birthplace of Cappucio the Wonder Dog).  Once we are done with the pandemic I hope that Jerry and I can get together to talk about homebrew radio.  

Like me, Jerry recently turned his attention to the shortwave broadcast bands. He too went the homebrew route, but his receiver is a regen.  It is based on the Sproutie by Dave AA7EE. 

Here is Jerry's article detailing the project and the results: 




Jerry had been scheduled to talk about antenna tuners at FDIM this year, but the pandemic caused the event to be canceled.  He shared with me a Limerick that he was going to include in the presentation.  Obviously we have similar feelings about automatic antenna tuners. 


In days of old
when hams we bold
and BALUNs weren't invented
We adjusted our C
and fiddled with L
and reflected power was prevented


KI4IO in his shack Feb 2020

Wednesday, May 27, 2020

Antennas, Money, and Ham Psychology


During SolderSmoke Podcast #222, Pete lamented the fact that many hams are willing to spend significant amounts of money on "manufactured" dipole antennas that are little more than pieces of wire.  Tony Fishpool G4WIF sent a graphic on the wire antenna he uses (see above).  He also shared an anecdote about G5RV antennas and G-QRP Club founder George Dobbs:  

From Tony: 

The aerial that I’ve had so much fun with, an End Fed Half Wave, cost me £8 ($9.80) for the toroid and the rest came from the junk box. The reel of wire was probably a £1  ($1.25) from a radio rally. You never pay big money for wire at a rally. People take it there to get rid of
it!

It covers 80m and all  harmonically related bands.
My garden is too small so I cheated by using some linear loading to
make it fit. (on the back fence).

WIth 5 watts CW on 40m I can hit the USA reverse beacons most mornings.

It was about £9 ($11) to make - but if you count the Spiderbeam

12m pole, it  was another £98 ($120).

I have a little George Dobbs story relating to aerials. Probably around
15-20 years ago. He was speaking at a radio club near to me so I went along to support
 him and have a beer with afterward.

He gave his usual entertaining (and always funny) talk during which he
paused - and said, as if in confidence to the audience:

“Do you know, I’ve heard, and I don’t know if it is true, that there are
people who actually pay real money for a pre-made G5RV”

I swear that it went very quiet and there may even have been the odd foot
shuffled.    Tony
---------------------------------------------------------

Coincidentally Mike, WU2D put out a VERY ILLUMINATING YouTube video on the psychological aspects of ham radio operators and their antennas.  Here it is:





Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column