Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, July 12, 2020

A Swedish Homebrew uBITX built in Dubai


It was great to get an update from Martin.  He has moved his workshop from Dubai back to Sweden.  We have seen lots of homebrew BITX monobanders, but very few homebrew multiband uBITXs.  Check out Martin's.  Very FB.   The input from Farhan was very cool, as was Martin's wise decision to follow Farhan's suggestion and to pause construction once the receiver was working.  As Martin put it, "I halted the build for a couple of days and just enjoyed listening."  Thanks for the update Martin. 


Dear Bill and Pete,

Here comes a long overdue update from my workbench, my last update was back in March 2017 when I had completed my first transceiver project.

I did not stop building and quite soon after I completed the CW transceiver Farhan posted the first schematics of the uBitx, why not? Why not get into a multiband CW-SSB transceiver as my next project.

After completing the receive part I was amazed... 


I halted the build for a couple of days and just enjoyed listening.
When it was time to start on the filters and the main RF Amp I sent Farhan an email asking about the way forward, he responded like this on May 17th 2017

"martin,
first, let me congratulate you, i suppose you are the first one to build a ubitx after me! second, i am not happy at all with the transmit line up, the drivers were not doing a good job above 14 mhz. i have replaced the 2n2219s with parallel 2n3904s. i also had to add two more LPFs, for proper harmonic suppression. i am headed for dayton today. once in dayton, i will try to find time to send you the latest circuit diagram. 
once again, congratulations on a wonderfully constructed ubitx."


Wow, what a shot in the arm for a fairly new home brewer!!! I was now back full speed with solder melting. I completed the filter bank and the RF amp, this is where I am starting to move away from the published diagram, I believe it is good to make it your own a little.

The end result was great, I worked many many stations in Europe and Asia with this little machine both SSB and CW.

In 2019 we decided to move back to Europe, the workbench and all boxes with parts and junk together with the rest of the household found their way into a 40ft container and was sent of to Sweden.

The A65DC Laboratories became SM0P Laboratories, the iron is still always hot and there is something brewing here all the time.

Thanks for a brilliant show boys,

Martin SM0P







2 comments:

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column