Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, July 16, 2023

The Super Islander Mark IV -- A Cuban DSB Transceiver Made From CFL Lightbulb Parts


Trevor Woods also sent us this report from Arnie Coro.  It is not clear to me what difference (if any) there is between the Super Islander Mark IV and the Jaguey Five (described yesterday).  But the bit about using parts from old CFL bulbs is interesting.  This was something championed by Michael Rainey AA1TJ several years ago.  See: https://soldersmoke.blogspot.com/2009/01/soldersmoke-98.html  
and:
https://www.qsotoday.com/transcripts/aa1tj

April 2010:

Today, I will be answering a question sent by listener Bruno from Croatia... Bruno picks up our English language programs via Internet, but he is now also listening on short wave too. He sent a nice e-mail message asking me about the latest version of the Super Islander amateur radio transceiver, because he wants to build one.

Well amigo Bruno, the Super Islander Mark IV is now on the air, and results are very encouraging considering that it is a 40 meters band transceiver built using recycled electronic components.

The Mark IV uses a totally different approach to the receiver design, and it adds two solid state audio filters.

Amazing as this may sound, some of the electronic components used to make the Super Islander Mark IV transceiver came from the circuit boards of broken or damaged Compact Fluorescent Light Bulbs... and that means that there is virtually an endless supply of those parts.

Here is now amigo Bruno, and amigos listening to the program at this moment, a brief description of the Super Islander's Mark IV receiver module.

It starts with a simple resistive signal attenuator that feeds a dual tuned bandpass input filter.

The filter has a limited bandwidth , chosen so as to limit response to out of band signals... The filter is followed by a cascode transistor radio frequency amplifier stage, that feeds a broadband four diodes product detector.

Low level audio from the product detector goes to the audio filtering and amplifying module, made with discrete transistors, of which several of them are also recycled from the Compact Fluorescent Light Bulbs circuit boards...

This version of the Super Islander, the Mark IV , is radically different from any previous ones, as we have now switched over to a totally low cost solid state design , that can be easily reproduced because it uses very common electronic components and straightforward , easy to adjust circuits.

In our upcoming mid week edition I will describe the VFO, or variable frequency oscillator and the transmitter module of this unique low cost amateur radio transceiver, the Super Islander Mark IV... about the lowest possible cost transceiver that will make possible regular two way ham radio contacts on the 40 meters band using either voice or radiotelegraphy modes.

Saturday, July 15, 2023

The Jaguey Five -- The Solid State Cuban DSB Rig -- Circuit Description

Obviously we need a picture of a Jaguey transceiver. 
"Made in Jaguey Grande" 

Trevor Woods found this report from Arnie Coro (SK) CO2KK: 

February 2009: 

Here is now item three in detail: It was quite a long time ago, when I heard about a nice project sponsored by IARU, the International Amateur Radio Union, that was promoting the design of a kit, a simple single band transceiver kit that could be sent in a small air mail parcel to radio clubs in Third World nations which could then deliver them to would-be radio amateurs, and help them build and align the radios... But, unfortunately I lost track of the project, and as many of our listeners may realize there is still a great need of such a project... Past efforts along this line have had some problems, among them the mistaken approach of using of very sophisticated electronic components that in case of a breakdown would be impossible to replace locally; and also, all attempts seemed to try to make the transceiver an ultra- or near-ultra-miniature radio, something that won't help at all with beginners...

So, when I recenlty received an e-mail from Canada, asking what I thought about reviving this great idea, our Canadian amigo asked what we had already done here in Cuba, with our JAGUEY double side band plus CW 10 watt transceiver that went up to REVISION NUMBER 5. , This was the last upgrade, done about three or four years ago, and we named it the Jaguey FIVE, as it generates 5 watts of CW... The Jaguey FIVE was a low parts count, not miniature, easy to build single band transceiver that used readily available components, instead of sophisticated state of the art parts...

In order to please the friend who wrote about this topic, here is a brief, on the air, description of our Jaguey FIVE and by the way, Jaguey is the name of a town, actually it is Jaguey Grande, or big Jaguey, and the Jaguey is a beautiful tropical tree... The original Jaguey transceiver originated in that Matanzas province town in 1982,

The receiver part starts with a simple yet effective RF attenuator, then it feeds a bandpass
filter made of two tuned circuits... we use shielded IF transformers from old TV sets 4.5 megaHertz audio chains... A simple bipolar NPN small signal transistor grounded base amplifier feeds a homebrew double balanced mixer... and we "discovered" quote, unquote, that the antenna balun transformers used in TV sets, the 300 to 75 ohms baluns, had a ferrite core with two holes that makes a wonderful broadband transformer for the double balanced mixer...

We use computer diodes removed from defunct ISA old computer cards and motherboards and developed a very simple test jig to match the diodes... The double balanced mixer is fed on the other port from a simple three transistor oscillator, of which we have two versions, one using three NPN bipolar transistors and the other one using an FET oscillator followed by two bipolars... at the output of the mixer we have AUDIO, as this is a direct conversion receiver, amigos!!!

Now we amplify the audio using discrete components and again we have two versions of audio filters, one with bipolar NPN transistors and the other using a very common operational amplifier IC... The audio power output stage also is available to the builder in two versions, one using discrete components and the other using an integrated circuit audio amplifier that is locally available here in Cuba and produces a booming 2 watts of audio, with a lot of gain and rather low noise! This is the audio IC used by the most popular TV set in use here in Cuba, so we were able to obtain them from the TV repair shops at low cost.

Well, that's why I will describe as a flexible design... again, no attempt is made to make the Jaguey single band amateur transceiver a miniature rig, as miniaturization is definitely not for beginners!!! And following up this description of the receive section of the Jaguey, in our upcoming mid-week edition of Dxers Unlimited, I will describe the transmitter section of the rig,that shares the same variable frequency oscillator with the receiver.... I think that a new more up to date version of the Jaguey transceiver could very well be made available in kit form, with large-sized and easy to assemble circuit boards. The old Version 5 uses three circuit boards, one for the receiver, one for the VFO and one for the transmitter, so the newcomer can assemble just the receiver and start listening to amateur radio communications before having his or her own ham license!!!

You are listening to the weekend edition of Dxers Unlimited coming to you from Havana on the air and on the web at our Dxers Unlimited blog.

----------------------

A video of Jaguey Grande, Cuba: https://www.youtube.com/watch?v=krblz_5o6jU

Earlier posts about the Jaguey on the SolderSmoke blog: https://soldersmoke.blogspot.com/search?q=Jaguey

Tuesday, July 11, 2023

Homebrew in Namibia -- Joe Noci V51JN -- -- The Wizard of Sawkopmund

 
Here at SolderSmoke I like to highlight the homebrew adventures of far-flung radio builders.  Joe V51JN melts solder in an especially exotic location:  on the edge of the Namib desert.   He is in a very interesting place:  https://en.wikipedia.org/wiki/Swakopmund

Here is Joe's QRZ.com page: https://www.qrz.com/db/V51JN

Joe recently posted on the Amateur QRP Radio Facebook group: 

I am not on the air much - here in Swakopmund ( Namibia) we have quite bad RFI from mains borne RF control signals for geysers, pumps, etc and 40M is unuseable, 30M almost usable and 20M sort of useable.. Complaint to CRAN - Our Radio Ministry - achieve nothing...So I do mobile out in the desert in the 4X4 when I can! I enjoy building radios - here are some photos - first is a 5watt 7MHz to 21MHz all band SSB rig - all homebrew, inc crystal filters, etc. PA is a push-pull LDMOS amp, 5W PEP.





Thanks to Doug KB8M for alerting me to this amazing work. 

Monday, July 10, 2023

Martein's Bandpass Filters - PA3AKE

Above you can see the really nice 15 meter filter that I built using data provided by Martein PA3AKE. 

https://martein.home.xs4all.nl/pa3ake/hmode/bpf_all.html 

Before I built Martein's filter, my bandpass had been inadequate.  Looking at the signals coming out of the diode ring mixer in my 15-10 rig, I realized that when I was on 15, there would also be an output on 10.  And vice-versa.  These outputs would have to be knocked down by the bandpass filters.  I had been using simple dual tuned circuit filters. But when I looked at the filter shapes of these filters in NanoVNA, I could see that On 15 the 10 meter signal was only down about 20 db.  And on 10 the 15 MHz output was also down only by about 20 db.  That's not enough.  Take a look: 

Before,  with the dual tuned circuit filter

After with Martein's Filter 21.5 Mhz

AFTER with Martien's filter 21.1 MHz

While the earlier filter had provided only about 20 db of attenuation at 28 MHz, Martein's filter provided at least 68 db of attenuation.  That is really nice.  And the passband is nearly flat at 1 db attenuation. 

I built mine using some of the guidance provided on Martiens site.  I did use T80-10 toroids (I got them from kitsandparts.com).  And I did not use copper clad boards.  

One of the charming features if Martein's filters is the total lack of trimmer caps:  Martein recommends tuning the filters by simple squeezing the coils (to increase inductance and decrease frequency) or by spreading out the turns a bit (to decease inductance and increase frequency).  I did the later when NanoVNA showed that I didn't quite have all of the 15 meter phone band on the flat portion of the curve. 

I also like the way Martein provides the values for BP filters for all of the HF ham bands.  Very useful. 

Next I will build one for 10 meters.  And I will probably go back to my Mythbuster and 17-12 rigs and build Martein's filters for these rigs.  
Thanks Martein! 

Sunday, July 9, 2023

Progress Report Video on my 15-10 Meter Homebrew SSB Transceiver


The receiver is mostly done on my 15-10 rig, and I am following Farhan's BITX20 advice: "pause at this point and listen to the receiver that you have built." In the video I mention a problem with out-of-band signals. I was hearing shortwave broadcast signals (Brother Stair!) and even strong 20 meter CW signals. I thought the problem may have been with the bandpass filters, but after thinking about it I focused on the diplexer coming out of the product detector. I put a simple diplexer (from W7EL's Optimized Transceiver) in there and the problem disappeared. I still plan on beefing up the Bandpass Filters -- the dual tuned circuits I have been using are, I think, inadequate. I needed some more space on the wood board so I installed a sort of "back porch" -- you can see it in the video. I will build a power amplifier (RD6 or RD16) and a mic amp. Soon I will be on 15 and 10 with this rig. On this one, I am going the full "radical fundamentalist homebrewer" route: no ICs, no manufactured PC boards, no VFOs from old Yaesus.

Thursday, July 6, 2023

The TEK 465 'Scope Used to Create Pong and the Apple II


Wow, this is almost enough to make me take another shot at repairing my TEK 465.  

 

Wednesday, July 5, 2023

Quetzal-1 -- The Guatemalan CubeSat

 

Wow, here's another piece of tech news from a place in which I have some experience.  Yesterday I posted about the Telekino developed and tested in Bilbao early in the 20th century -- today's post is about a much more recent effort in Guatemala: this one  to launch a small satellite, a CubeSat. 


Hack-A-Day reports that the Guatemalan University recently open-sourced all their data on the satellite: https://hackaday.com/2023/07/04/quetzal-1-satellite-goes-open-source/   The Hack-A-Day comments are, as usual, harsh and critical, filled with the assumption that the commenters could have done better.  

But hey, three cheers for Quetzal 1 and the Guatemalan satellite builders!  

Tuesday, July 4, 2023

A Very Early Radio-Controlled Device -- Using Spark and a Coherer, in Spain


Click on the picture for a better view -- check out the coherer and the tapper 

Hack-A-Day has an interesting story about Leonardo Torres Quevedo and his very early automated chess machine.  Torres Quevedo was a Spanish inventor active in the early years of the 20th century. 

The chess device was really interesting, but two things caught my eye about this fellow: 1) he lived and conducted some of his experiments in my old home of Bilbao, Spain and 2) he built a very early radio-control system that used -- in the receiver -- a coherer as the detector.  

There is a lot material on Torres Quevedo.  Here is just a sample of what is out there  

His book:  https://www.torresquevedo.org/revistas/index.php/BIB/issue/view/12/1.  Discussion of the Telekino device is on pages 109-127. 

The Branly Tube or Coherer: https://en.wikipedia.org/wiki/Coherer

https://en.wikipedia.org/wiki/Leonardo_Torres_Quevedo

https://www.researchgate.net/publication/2998424_Early_Developments_of_Wireless_Remote_Control_The_Telekino_of_Torres-Quevedo

https://cyberneticzoo.com/wp-content/uploads/2010/12/Telekine-Yuste.pdf

1903 article in Electron (Spain) about the Telekino and Coherers. https://hemerotecadigital.bne.es/hd/viewer?oid=0028654330&page=6

https://alpoma.net/tecob/?p=13766   This article contains the diagram of the device (see above).  You can see the coherer with its tapper.  

Here we see the Telekino installed in a boat in Bilbao harbor.

Friday, June 30, 2023

SolderSmoke Podcast #247 -- Hating on the IC-7300, Pete Goes FT-8 with a KWM-1, Bill's 15-10 Rig, MAILBAG

Bill's 15-10 Rig -- Click on image 

SolderSmoke Podcast #247 is available: 

Audio Podcast:  http://soldersmoke.com/soldersmoke247.mp3

Video:  (482) SolderSmoke 247 -- Hating on the IC-7300, Pete goes FT8 (with a KWM-1), Bill's 15-10 rig, Mailbag - YouTube

Bill’s Bench:

The 15-10 Dual Bander.

n  10 pole crystal filter at 25 MHz.

n  G3UUR, Dishal, AADE and all that..

n  Testing woes.  Looked bad.  But it was a bad test cable. Duh.

n  VFO (Colpitts) at around 3.5 MHz.

n  Buffer blues:  Bad J-310s.  Beware!  

n  Variable cap from a Heath Q Multiplier

n  A bit of a black art – competing goals. Freq coverage, etc.

n  BFO needed an amp to turn on the diodes in the balanced modulator

n  TIA amps.   SIX dual direction TIAs.  18 transistors.

n  On a pine board (like Frank Jones)

n  Will use the N6QW all discrete AF amp.

n  Maybe an RD16 in the final?

n  Will build a second one for the DR.

 Shameless Commerce:  Mostly DIY RF and the PSSST kit.  Todd K7TFC reports:  “The P3ST is on track for Lee Deforest's birthday release (August 26th). I'm going to send out another newsletter on July 4th, and I'll give some details on P3ST development.” Results of Todd’s Survey.

Pete’s Bench

n  FT-8 on the KWM-1!

n  Presentation to the ham club.

n  Why the Icom 7300 is the anti-thesis of homebrew.

MMAILBAG:

-- SPRAT 195  Summer 2023, in the mailbox.  A happy day at N2CQR

-- Armand WA1UQO sent a wonderful book about Faraday and Maxwell… And told me Jim K8OI was heading to our area.  I met Jim at the VWS Field Day event.  FB.  Thanks Armand.

-- Tony G4WIF sent Father’s Day greetings.

-- Alvin N5VZH asking about electrolytics for his 2-B.  Hayseed Hamfest!

-- John AC2RL replacements for the IBEW.  We need to start over!

-- Steve “Snort Rosin” Smith WB6TNL was in the area.  Sorry I missed him.

-- Joh DL6ID helping us to track down origins of a homebrew receiver Grayson saw in Berlin.

-- Grayson KJ7UM was in Europe visiting his wife’s relatives.  But I think he is back in the USA.

-- Walter KA4KXX sent a QRP HB family portrait. 

-- Wouter ZS1KE sent info on surface mount soldering.

-- George Zaff KJ6VU Ham Radio Workbench – re-runs! Recommended audio processor.  Let me know how it sounds. 

-- Michael AA1TJ   Great to hear from him. 

-- Alan Wolke W2AEW on the toroids  he used in Diode Ring video.  Thanks Alan!

-- Dean KK4DAS, AI and SWR meter project  And new lexicon word:  Hamsplaining. 

-- Bob N7SUR --  Let me know we are semifinalists in the Hack-A-Day prize!  

The 15 - 10 rig from above -- Click on image


Tuesday, June 27, 2023

Australia and Apollo 11 -- Honeysuckle Creek


Trevor reminded me that Parkes ("The Dish") was not the only Australian antenna at work during Apollo 11.  This very nice video gives a more complete description of what happened.  

I saw one piece of Collins gear.  And some of Curious Marc's HP frequency counters.  

More on the Honeysuckle Creek Tracking Station here: https://honeysucklecreek.net/

Monday, June 26, 2023

The Carrington Event and the Current Solar Cycle (Solar Max "Sooner and Stronger")

 

From the article: 

"Sunspot activity has increased dramatically in early 2023, with sunspot numbers far exceeding NASA's predictions each month — though nothing as big as Carrington’s sunspots have been seen yet. Still, the profusion of sunspots and other solar weather suggests that the next solar maximum will arrive sooner and stronger than NASA previously predicted. Whether the incoming maximum brings with it a Carrington-level storm is a matter of pure chance — but scientists will keep watching for spotty signs on the sun, just in case."

https://www.yahoo.com/lifestyle/see-monster-sunspot-launched-carrington-120000667.html


Friday, June 23, 2023

Part III: Curious Marc Repairs an All-Discrete Freq Counter: DO NOT ATTEMPT REPAIR OF CAVITY RESONATOR

I love all the "DO NOT ATTEMPT" warnings.  Wow, even HP got so skittish about this stuff.  Marc has a great sense of humor and notes that, "no cavity resonators were harmed in the production of this video."   I like the description of the mixers and the photo of the mixer antennas. 

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column