The Infinite Impedance Envelope Detector (done with an FET)

Recently a fellow ham claimed that "envelope detection" doesn't really exist, and that the standard "rectification and filtering" explanation of how envelope detectors work (going back to Terman and beyond) is wrong.  But here is a good demonstration of the envelope detection of an AM signal.  It uses an infinite impedance detector built around an FET.  As Baltic Lab notes in the video above, the action is essentially the same as what happens with a vacuum tube:  The device is biased at cut-off.  The negative portion of the ENVELOPE is discarded.  The positive portion of the ENVELOPE is passed through the device and filtered.  What remains is the audio -- the same audio frequency that modulated the carrier.  ENVELOPE DETECTION.  

I was thinking about how fortunate we were that this form of detection was possible. Fessenden used what were in effect diode detectors to envelope detect very early transmissions of radiotelephony. If simple envelope detection via rectification had not been possible, radiotelephony might not have been invented as early as it was. 

Here is Baltic Lab's blog post on this: https://baltic-lab.com/2023/02/jfet-based-infinite-impedance-detector-for-am-demodulation/

A Christmas Story: Mike AA1TJ Builds Receiver for 486 kHz, Listens to Fessenden Commemoration (Audio)

Mike's 486 kHz receiver

As if being able to get home on Christmas Eve 2021 and then catching the Webb Telescope launch was not enough, Santa had another gift for us:  Michael Rainey, AA1TJ, the Homebrew Hero of the Hobbit Hole, was back at it, melting solder. Mike threw together a regen receiver that allowed him to receive a transmission commemorating Reginald Fessenden's historic first transmission of phone signals.  I was really pleased to once again be able to read about an AA1TJ radio adventure.  Thanks Mike!  Here is what Mike heard: http://soldersmoke.com/AA1TJ 920km.mp3

Mike wrote: 

My chum, Peter/DL3PB, recently told me that Brian/WA1ZMS would broadcast a commemoration of Reginald Fessenden's mythical (operative word) 1906 Christmas Eve AM transmission. Doesn't that sound like fun?

True to form, I began scratch-assembling my receiver yesterday afternoon just as Brian went on the air. Then again, a two-transistor regenerative radio for 486kHz isn't exactly rocket science. In any case, I was up and listening inside of a half hour.

 
What did I hear? Static. Just static. As a sanity test I quickly tuned down to 371KHz to find my favorite non-directional beacon, "GW," beaming in loud and clear from Kuujjuarakip.

 
Kuujjuarakip?

Kuujjuarakip is a tiny settlement of mostly Inuit and Cree inhabitants located up on Hudson Bay. The villages are primarily accessible by air and water so a robust radio beacon is an obvious necessity.

 
Satisfied that my receiver was working properly, I re-tuned to 486kHz. Back to static. On the bright side, at least there were no commercials. I continued listening intently until Vic called me to dinner. After the dishes were done I slipped back down to my underground radio shack for one last try.

I heard it right away. Beneath the static I heard a weak, out-of-tune, solo violin playing, "Oh, Holy Night." The signal strength varied wildly with ionospheric propagation. When the signal finally climbed high enough above the noise I ripped out the bipolar transistor audio amplifier stage, connecting my headphones directly to the junction field effect transistor detector output terminals. Of course the audio was far weaker now, yet I could easily follow the tune until it eventually faded away. Not bad for an estimated 15 watt ERP AM signal from a distance of 920km. And on 486kHz, no less, just a hop-skip-and a jump from the old 500kHz Maritime CW band; where countless ship radio operators went to send their last SOS.

 
Returning to the house, I emailed my reception report and included a short recording that I had made of it. Brian replied just after midnight; apparently, equally as stoked

"Yours’ is the best DX ever given your regen RX! Way to go! I just love it."

He went on to tell me that he was born and raised in Vermont, but he'd been working as a radio scientist down in Virginia since 1990. Told me his heart was still here in the Green Mountains and he was touched to learn his meager signal had found its way back there on Christmas Eve. All in all, a night to remember.

 
If you're still with me I hope you'll listen to the short NPR story in the provided link. It originally aired on the supposed 100th anniversary of this event. It's not just about radio history. It's about belief, memory and the myths we lug around in our heads. I thought it was well done.

 
Cheers,
Mike

Listen to what Mike heard. He says he "merely connected the mic input line of my computer across the headphone terminals. Some of the noise in the recording, - certainly the higher frequency stuff - is a byproduct of the computer. The headphone audio with the computer switched off was much more pleasant."  Here it is: http://soldersmoke.com/AA1TJ 920km.mp3

NPR story (audio and text)

https://www.npr.org/2006/12/22/6665738/christmas-eve-and-the-birth-of-talk-radio?fbclid=IwAR1G3ZchgTCc2EDnkS5BCxGARwsa87bvf0LO9nd5hfLQDvb96fR6w0dBzw4