Straight Key QRP Homebrew Adventures -- TRGHS

Last Saturday I put the Tuna Tin Two Top together with my Herring Aid Five 38 (year) Special and the Indian key that Farhan gave me.   I discovered that some of my 40 meter CW FT243 crystals had disappeared into the entropy of the shack.  But I was able to find one for 7050 kHz. That was a bit of good luck because it turns out that 7050 is the frequency of a congenial group of operators known as the Straight Key Century Club.  I felt right at home.  I have been inducted.  My SKCC number is 17272.  Very QRP, don't you think?   It is almost a Vanity SKCC.  Clearly, TRGHS.

I have been having excellent luck with this 7 transistor rig.  I have had one contact each day since I put it on the air, all of them in response to my CQ calls.  I've worked:

K1PUG Hank in Connecticut (twice)
W8HOG  Jerry in Ohio
WA4GQG Kevin in North Carolina
WA2AAW Frank in New York
KM4FO Dwight in Kentucky

This morning I added a little piezo buzzer for sidetone.  I am thinking of adding a VFO to the Tuna Tin.

A Fishy Rig: Herring Aid Five, Tuna Tin Two, VU2XVR Key

Haunted by a fear of rapid expulsion from the QRP Hall of Fame, I decided that I should immediately do something to establish some form of QRP street cred.  Looking around the shack, I realized that all of the ingredients were there:  My Herring Aid Five Direct Conversion receiver (completed after only 38 years), my Tuna Tin Two transmitter, the VU2XVR key that Farhan gave me, one 7050 kc  FT243 crystal.   I put it all on a piece of scrap plywood. A couple of nice connectors from W8NSA supported the DPDT T/R switch and the coax connector. I keep the receiver LO running all the time.

Now, let's be clear: running 250 milliwatts, rock bound with a Direct Conversion receiver that tunes both sides of zero beat is not for the faint of heart.  The log book does not fill up rapidly. But hey, I made one contact the following morning.  K1PUG said I was 559 in Connecticut.      

Knack Story: Ryan's Rig

Bill,
      
... [I know] a young ham locally who suffers terribly from the
affliction of the "knack". Ryan, KJ6HBY, is 17, and an Extra class,
who earned his DXCC in a year. He is a great builder, starting out
building his first antenna a couple years ago by breaking apart an old
washing machine motor and unwinding it for the wire. Along the way he
has restored various rigs, i.e. HR10, S-38, IC707, etc and built a
BTX17 (17 meter version of the BTX20). Enclosed is a couple photos of
his latest creations. First, he hand carved a wood morse code key. It
actually feels and works well. Now he has build a single tube xmtr,
and after fussing with it, is pumping out 4 watts. Both of the kid's
folks are hams as well as his sister. I had an opportunity to visit
his shack the other day. It's a teenage ham's dream and a mother's
nightmare. Racks floor to ceiling with radios! If anybody has the
knack, Ryan does. Makes me think there is a future, we can sleep well
tonight.
73
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Arduino Does Straight Key Night

Bill,
     Hope a good Christmas and excellent New Year. Here at WA6ARA we had a blast for Straight Key night . In the past I have used new keys, old keys and multiple keys. This year we celebrated SKN with a little twist. At Pacificon I purchased a hugh CW key, all made out of wood, about 3 times the normal size J-38. This isn't a QLF key but a piece of beautiful wood working, and fully functional. This was my main key for SKN.
But SKN can require the sending of CQ SKN for a considerable amount of time. Normally a programed keyer would do the job fine. But this is not in the true spirit of SKN, the use of the straight key. So, using a trusty Arduino board and a few lines of programming,  I solved the practical and ethical problem. The Arduino drives a model airplane servo. The servo is positioned such that it's arm presses down on a miniature J-38 key, thus sending the "CQ SKN". Also the miniature J-38, about half size, sort of balances out the larger size of the
hand key, and keeps the universe in check. I've enclosed a short youtube for your viewing enjoyment

http://youtu.be/Rn7Ky9Ib7ug

73
-- 
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

The FUNKY Keyer

Paul up in Manchester has some really intriguing ideas on CW and keyers. He likes highly personalized CW from straight keys, and thinks he can even hear the influence of Latin-based languages when receiving signals from stations in France and other Romance language countries. (Like me, he also thinks a bit of homebrew chirp adds some character to signals. ) Automatic keyers seem to squeeze all of the individuality out of CW. So Paul has written some computer code to put that individuality back in! Can we get a "Lake Erie Swing" option Paul? Check out Paul's blog. Interesting stuff!

Hi Bill

Further to the kind words of introduction you gave me as a “new homebrewer” in Soldersmoke 104, I’m writing to let you know about a little project of mine which I think you might appreciate…

I made a h/b keyer a while back and recently added the ability to send automated 3*3 cq calls (and cq FISTS calls).

On doing this, I realized how much I HATE the sound of machine generated CW – so mechanical and lifeless. I want to hear a real fist – preferably with some chirp and drift thrown in for good measure!

So – I’ve come up with an alternative – The FUNKY keyer!

It adds some random timing "jitter" to each automated cq call, to simulate the sound of a real fist on a straight key.

You can read all about the Funky Keyer on my blog, http://m0xpd.blogspot.com

The blog also documents some of the other outcomes of my personal puffs of solder smoke, including the “Funster PLUS” 40m CW Transceiver and the “Not-so-superhet” experimental valve receiver. There’s some operating stuff, including WSPR on 40 and 80m with my Softrock SDR and I was inspired by Soldersmoke to include some travelog – ZL, VR2, BY, HB, etc.

Hope you enjoy it.

Let me take this opportunity to thank you for all the enthusiasm and inspiration you continue to give us in Soldersmoke,

73 de Paul, m0xpd

Paul Darlington