Mr. Carlson Makes a Thermatron Power Supply for a BC-348

When I was 14, I had to make a power supply for a Heath HW-32A.   Mine ended up working, but it was nowhere near as nice as Mr. Carlson's BC-348 supply (shown in the video above).  I didn't have a sand blaster, nor a drill press, nor much of anything else, really.  

But hey, don't real boatanchor hams use Greenlee chassis punches?  What's with the drill press and the hole saws? 

Note that Mr. C takes care to make sure that the rectifier tube is in the proper angle FOR OPTIMAL VIEWING.  That's some serious attention to detail OM.  And whoa, DELICATE SURFACE MASKING TAPE from 3M?  Respect!  Also, era-specific looming material. 

His point about the importance of the cardboard washers in the power transformer was really useful.  I hadn't thought about that. 

Here are the two previous BC-348 videos: 

https://www.youtube.com/watch?v=nX87kwSshZ8

https://www.youtube.com/watch?v=Zqe6CBe0iGs

Thanks Paul! 

Ragnar LA1UH's Wonderful Museums in Norway

Here are two more great museum visits by Helge LA6NCA.  In these two he visits Ragnar LA1UH.  

Ragnar has a lot of maritime experience, so we see a lot of older ships' radios.  But his interest in the radio art is much broader and we also see a lot of other kinds of gear: 

-- Wow,  a "travel radio" in a suitcase from 1927.  Was this the idea that later lead to the Parasets of WWII? 

-- Lots of "Stay Behind" gear from the Cold War. That "Africa" receiver (that never made it to Africa!) is very interesting. 

-- We see an ART-13 with autotune, ANGRC-9s, several ARC-5 command sets.  I was hoping Raganar would fire up a Dynamotor, but no. 

-- I spotted a Galaxy V transceiver.  I have the VFO reduction drive from one of these in my homebrew 15/10 rig.   

-- We see several variometers in the emergency (500kc?) maritime transmitter.  I used a variometer in my super-simple ET-2 transceiver (with an N0WVA receiver). 

-- Lots and lots of tubes. 

Ragnar says he himself is of 1944 vintage. I hope some "stay behind" provisions have been made for these amazing museums. 

Thanks to Helge LA6NCA and to Ragnar LA1UH.  

Mr. Carlson's ART-13 Transmitter (with Dynamotor)

Here we have a really cool video from Mr. Carlson.  In it he reveals (admits!) to what we already know:  HE IS A HAM RADIO OPERATOR.  FB Mr. C!

You can see that he is a true ham, with a true case of THE KNACK, when you see his reaction to the inside view of the ART-13.  He seems to gasp as he notes that there is a lot of "RF goodness" in that box.   There is a vacuum relay, a bread-slicer capacitor, there is even a variometer. And lots of good, big THERMATRONS.  Only a true ham, a true Knack victim can recognize this RF goodness. 

The Dynamotor that goes with this transmitter is really interesting to me.  I have been hearing these things whining in the background (audible noise, not a signal defect) on many early morning (Saturday 3885 kHz) of the Old Military Radio Net.  I can often hear the dynamotor of Buzz W3EMD as he transmits from Rhinebeck, New York.   It was great to see the inside of this device.  

Back in 2017, Hack-A-Day took a look at Dynamotors: 

https://hackaday.com/2017/07/04/retrotechtacular-dc-to-dc-conversion-rotary-style/

There are several good ART-13/BC-348 pictures on W3EMD's QRZ page:

 https://www.qrz.com/db/W3EMD   

I was especially taken by the handwritten frequency chart on the front panel of the ART-13.  This reminded me a lot of the handwritten readout that I have been using on various rigs, including (most recently) the 15-10 SSB transceiver. I hope Paul focuses on this paper-and-pencil frequency chart;  it is nice to step away a bit from the glowing numerals of San Jian. 

Mr. C points out that the ART-13 was the transmitter that was paired up with the BC-348 receiver.  He will be working on both in the weeks ahead. 

Thanks Mr. Carlson. 73 OM. 

Old Military Radios at the Air and Space Museum Udvar-Hazy Center, and Autogyros

 

My son Bill and I were out at the National Air and Space Museum's Udvar-Hazy Center (out near Dulles Airport, where they display the really big stuff).  We spotted these old military radios.  The ARC-5 Command sets caught my eye.  Of course I was thinking about the great VFO parts inside those boxes...   The acknowledgement of the ARC-5's contribution to ham radio (on the card) was nice. 

 They also have an ART-13 on display.  

We had a lot of fun looking at all the planes.  We were especially impressed by the Autogyros. 

The Bensen B-6 Gyroglider seemed to be really pushing the envelope (of good sense!).   This was a an Autogyro with NO MOTOR.  It was towed!  No license required as long as you didn't release the tow line.   Note that it was designed in 1954 to introduce teenagers "to the thrills of flight at minimal cost." The headgear and goggles were key.  And the kit was only $100! 

A Great Morning on the Old Military Radio Net: AB9MQ's Central Electronics 20A, W3EMD's Dynamotor, WU2D

Just a portion of Masa's shack

I usually try to listen in on the Old Military Radio Net on Saturday mornings (3885 kc).  Lately I listen with my Mate for the Mighty Midget receiver.  

This morning's session was especially good.  For me the highlight was when Masa AB9MQ called in from Normal, Illinois using his Central Electronics 20A (see below).   That was one of the earliest SSB rigs.  A phasing rig, it also ran AM (which was what Masa was using this morning).  He had it paired up with a Central Electronics 458 VFO.  You folks really need to check out Masa's QRZ.com page: 

https://www.qrz.com/db/AB9MQ

Buzz W3EMD called in from Rhinebeck, NY.  I could hear his dynamotor in the background.  Buzz said hello to Masa in Japanese.   FB.

Always great to hear Mike WU2D. 

W2EWL's "Cheap and Easy SSB" Rig -- And The LSB/USB Convention Myth

In March 1956 Tony Vitale published in QST an article about a "Cheap and Easy" SSB transmitter that he had built around the VFO in an ARC-5 Command Set transmitter.  Vitale added a 9 MHz crystal-controlled oscillator,  and around this built a simple phasing generator that produced SSB at 9 MHz.  He then made excellent use of the ARC-5's stable 5 - 5.5 MHz VFO.  His rig covered both 75 meters and 20 meters.  Here is the article:

http://nebula.wsimg.com/2b13ac174f7f2710ca2460f8cf7d6b8b?AccessKeyId=D18ED10DA019A4588B7B&disposition=0&alloworigin=1

Because it used the 9 and 5 frequency scheme, over the years many, many hams have come to think that Vitale's rig is the source of the current "LSB below 10 MHz, USB above 10 MHz." This is  wrong.   An example of this error popped up on YouTube just this week (the video is otherwise excellent): 

First, Vitale's rig had a phasing SSB generator. All you would need to switch from USB to LSB was a simple switch.  And indeed Vitale's rig had such a switch. Pictures of other Cheap and Easy transmitters all show an SSB selection switch. So with a flip of the switch you could have been on either USB or LSB on both 75 and 20.  With this rig, you didn't even need sideband inversion to get you to 75 LSB and 20 USB. 

Second, even if hams somehow became so frugal that they wanted to save the expense of the switch, leaving the switch out (as suggested above) would NOT yield the desired "75 LSB 20 USB" that the urban legend claims that W2EWL.   As we have been pointing out, a 9 MHz SSB generator paired with a 5 MHz VFO (as in the Vitale rig) will NOT -- through sideband inversion -- yield LSB on one band but USB on the other.   

W2EWL's rig could not have been the source of the LSB/USB convention.  I still don't know where the convention came from. I am still looking for the source. 

But leaving the LSB/USB convention issue aside, Tony Vitale's rig is an excellent example of early SSB homebrewing, and of a very clever use of war surplus material.  In the January 1992 issue of Electric Radio magazine, Jim Musgrove K5BZH writes of his conversations with Vitale about the Cheap and Easy SSB.  Tony told Jim that this rig came about because the Central Electronics exciters required an external VFO -- they recommended a modified BC458.   B&W had recently come out with a phase shift network. Vitale went ahead and built the whole rig inside a BC458 box.  FB Tony! 

In the December 1991 Electric Radio, Jim K5BZH reports that Tony was recruited into the ranks of SSBers when he watched a demonstration of SSB by Bob Ehrlich W2NJR in November 1950. Tony very quickly started churning out SSB rigs.  His daughter Trish Taglairino recounted that when her father had "done something great again" there would be a parade of hams to the basement shack.  About 30 guys showed up when Tony put his first SSB rig on the air -- they sent out for beer.  

Thanks to Jim for preserving so much SSB history. 

Mythbuster Videos 8 and 9 -- The Old Military Radio Net plus "Zero Beat and The Vertical Skirts"

I like to listen to the Old Military Radio Net on Saturday mornings. This week I was listening with the Mythbuster receiver. The AM carriers provided a good opportunity to observe the effects of the steep skirts of the 10 pole crystal filter. We start at zero beat, with the BFO exactly on the carrier frequency. If I turn the VFO dial in one direction, I in effect move the passband in a way that puts the carrier in the passband. And it is no longer zero beat with the BFO, so we hear the heterodyne (the beat!). But if I turn the VFO dial in the other direction, the carrier is now outside the passband. Even though the BFO would produce a tone, we don't hear a tone, because those steep filter skirts are keeping the carrier out. We do continue to hear some of the sideband frequencies, because they remain in the passband. The very sharp drop-off of the carrier tone is a good indication that the steep skirts of the crystal filter are doing the job.

"Zero Beat and the Vertical Skirts" Sounds like the name of a Punk Rock band, doesn't it? Anyway in this video I explain what happened in Mythbuster Video #8 (above). I explain why we can hear the Old Military Radio Net carriers when I tune the VFO in one direction, but not in the other.

Straight Key Night 2021 at SA2CLC in Sweden

Wow, check out the FB gear of Tommy SA2CLC in Sweden, in use on Straight Key Night 2021. There is some German WWII gear,  a BC-348,  a homebrew transmitter, and some FB QRP kits. 

More on Tommy SA2CLC here: https://www.qrz.com/db/SA2CLC 

The culvert under the road for coax to the antennas is very cool. 

FB Tommy!  A belated HNY to you OM. 

LA6NCA's German Military WWII Receivers, and a Luftwaffe Receiver with FAST QSY

Discussions of old military radio gear are dominated by talk of U.S. radios.   Yesterday in the comments section of the SWLing Post I found two interesting videos about German WWII equipment.  Above you can see LA6NCA's receivers.  Below there's a video of a Luftwaffe receiver with an amazing capacity for really rapid frequency change.