Electronic Toys and Their Influence on Us

Mike WU2D recently put out this interesting video.  I vaguely remember the springs on the Radio Shack kits -- I also remember (bitterly) not being able to get their shortwave receiver to work.   I really wanted to tune in HCJB and Radio Moscow.  This probably led me to ask Santa for a Lafayette HA-600A receiver in 1973 or so. 

An earlier influence was the little intercom kits.  I think they worked over the AC lines?   We took some of them to the beach bungalows we had in Lavallette NJ.  With them we were able to speak clearly to similar units in nearby bunalows.  Wow, that was cool. That got me interested in radio. 

Cassette tape recorders were another early influence. I still have a recording I made with a tape recorder I got for Christmas, probably in 1972.  I used this recorder to practice CW for the ham exam. 

I managed to escape the CB madness.   But I came close to falling into the groovy psycho stuff of the early 1970s.  I remember the Transcendental Meditation gizmos.  I never built one, but if I had I may have been better off with CB. 

I kind of wish I had followed the example of the Woz and Jobs by making telephone blue boxes.  This could have led me to riches.  But as Jean Shepherd used to say, young men often come to a fork in the road: one path leads to wealth, the other to ham radio flea markets.  I got on the second path.  

Thanks Mike! 

 

The Beginning of MY Radio Life...

 

Unlike Pete (see below), I don't have any cool pictures of me in front of an early station.   But in the picture above,  there I am, at the Thanksgiving table in 1973 age 15.  I was on the air by this date, on CW as WN2QHL.  Armed with a Lafayette HA-600A and a DX-40, I was tearing up the ham bands, especially 40 meters.  Look at the tension in my face, the grip of my fist... I just wanted to finish that turkey and get on the air!  But no, I had to have Thanksgiving dinner. 

I recently realised that I have been a ham for more than 50 years. Is there an HCWA?    

This and the recent movie from India led me to think about the timeline of my early radio days: 

-- Christmas 1972.  Santa brings me a Lafayette HA-600A general coverage receiver.  With jeweled movements.  Age:  14

-- April 27, 1973.  Novice Ticket becomes effective.  WN2QHL.  Age 14. 

-- July 19, 1973.  First contact (with Elmer WN2NEC).  Age 14.

-- February 1 and 2 1973.  A grumpy old-timer calls -- during the Novice Roundup! -- to tell me that I'm putting harmonics onto the 20 meter band.  I get scared and go off the air.  Geez!  I probably just needed to retune the tank circuit.  Age 15. 

-- February 23, 1974.  I go back on the air with a DX-100.  Age 15. 

-- March 5, 1974.  I take the General Class exam at the FCC office in New York City. I pass. Age 15. 

-- April 11, 1974.  I buy the Drake 2-B from WN2NEC. This revolutionizes my radio life.  Fifteen meter contacts become possible.   Age 15. 

-- April 13, 1974.  I work ZL2ACP on 15 meter CW.  I wake up my parents to tell them.  Age 15. 

-- April 21, 1974.  END OF NOVICE OPERATION.  Apparently we were still working under a one year limitation on Novice operation.  Could the expiration date have been marked on the license? 

At this point the FCC screwed up and sent me a Technician License instead of a General Class License.  My father got on the phone to Gettysburg and straightened this out.  Thanks Dad.  So I was only a Technician for a few weeks. 

-- April 9, 1974.  General Class License effective.  I become WB2QHL,  a man of substance.  Age 15. 

-- May-June 1974.  I acquire a Heathkit HW-32A 20 meter SSB transceiver from the Crystal Radio Club.  But I have to build the power supply from an old TV.  Somehow, I survive. Age 15. 

-- June 11, 1974.  First contact with the HW-32A.  Age 15.   

-- November 9, 1974.  Last contact with the HW-32A . Age 16. 

-- March 15, 1975.  First contact with my Hallicrafters HT-37. Age 16. 

Above is my only photo of my teenage ham radio station.  I can date it via the QSL card above the map. I still have that card.  I worked W7RUK on March 25, 1975.  That contact was on 20 SSB, but when this picture was taken I was on CW (the key is plugged in, not the microphone).   

-- June 1976   I graduate from High School.  Age 17.  

-- I was active and on the air through the summer of 1976. 

-- July 1976 -- QST article on the Herring Aid 5 receiver.  I try to build it and fail.  Age 17. 

-- October 1976 -- I depart for Army Basic Training. 

There is someone else who needs honorable mention here:  My sister Trish.  Here she is, next to me at the Thanksgiving table in 1973.  Trish helped me keep my ham radio log book.  Thanks Trish! 

Pete Juliano, Field Day, 1959.  With a DX-100B and (gasp!) a QF-1. 

Putting the "Mate for the Mighty Midget" Back to Work -- With a DX-100 on 40 Meter AM

After working on it for a while I got so fond of my old Hammarlund HQ-100 that I moved it from the AM/Boatanchors operating position over to a more convenient spot right next to my computer.  This left a big gap on the receive side of the AM station.  

I briefly put my HRO-ish solid state receiver above the DX-100, but I'm afraid that receiver needs some work.  More on that in due course. 

I thought about putting my SOLID STATE Lafayette HA-600A atop the thermatronic DX-100, but this just didn't seem right. The Radio Gods would NOT approve. 

So I turned my attention to the Mate for the Mighty Midget that I built in 1998 and have been poking at and "improving" ever since. 

This receiver worked, but not quite right. It received SSB stations well enough, but when I turned off the BFO I could no longer hear the band noise. I wasn't sure how well the RF amp's grid and plate tuned circuits tracked.  And I had serious doubts about the detector circuit that Lew McCoy put in there when he designed this thing back in 1966. 

As I started this latest round of MMMRX poking, I realized that I now have test gear that I didn't have in 1998:  I now have a decent oscilloscope.  I have an HP-8640B signal generator (thanks Steve Silverman and Dave Bamford).  I have an AADE LC meter. And I've learned a lot about building rigs. 

FRONT END TRACKING

The MMRX has a tuned circuit in the grid of the RF amplifier, and another in the plate circuit of the RF amplifier.  There is a ganged capacitor that tunes them both.  They need to cover both 80/75 and 40 meters. And they need to "track" fairly well:  over the fairly broad range of 3.5 to 7.3 MHz they both need to be resonant at the same frequency.  

McCoy's article just called for "ten turns on a pill bottle" for the coils in these parallel LC circuits.  The link coils were 5 turns.  No data on inductance was given.  Armed now with an LC meter, I pulled these coils off the chassis and measured the inductances of the coils.  I just needed to make sure they were close in value.  They were: 

L1 was .858uH L2 was 2.709         L3 was .930uH  L4 was 2.672

Next I checked the ganged variable capacitors.  At first I found that one cap had a lot more capacitance than they other.  How could that be?  Then I remembered that I had installed trimmer caps across each of the ganged capacitors. Adjusting these trimmers (and leaving the caps connected to the grid of V1a and V2A, I adjusted the trimmers to get the caps close in value.  I think I ended up with them fairly close: 

C1: 63.77-532 pF          C2 64.81 -- 525.1 pF

I put the coils back in and checked the tracking on 40 and on 80/75.  While not perfect, it was close enough to stop messing with it.  

DETECTOR CIRCUIT

I've had my doubts about the detector circuit that Lew McCoy had in the MMMRX.  In his 1966 QST article he claimed that the circuit he used was a voltage doubler, and that this would boost signal strength.  But I built the thing in LT Spice and didn't notice any doubling.  And consider the capacitors he had at the input and output of the detector:  100 pF.  At 455 kHz 100 pF is about 3500 ohms.  At audio (1 kHz) it is 1.5 MILLION ohms. Ouch.  No wonder years ago I put a .1 uF cap across that output cap just to get the receiver working. 

Scott WA9WFA told me that by the time the MMMRX appeared in the 1969 ARRL handbook, the second "voltage doubling" diode was gone, as were the 100 pF caps.  Now it was just a diode, a .01 uF cap and a 470,000 ohm resistor.  I switched to the 1969 Handbook circuit (but I have not yet changed the 1 meg grid resister to 470k -- I don't think this will make much difference).  Foiled again by a faulty QST article, again by one of the League's luminaries. 

6U8s out, 6EA8s in 

We learned that the 6U8 tubes originally called for by Lew McCoy are getting old and not aging well.  So I switched all three to more youthful 6EA8s.  This seemed to perk the receiver up a bit. 

MUTING from the DX-100

My K2ZA DX-100 has a T/R relay mounted in a box on the back of the transmitter.  When the Plate switch goes up, it switches the antenna from receiver to transmitter.  The box also has a one pole double throw switch available for receiver muting.  I put the common connection to ground, the normally connected (receive position) connect the ground terminal of the AF output transformer to ground -- it is disconnected from ground on transmit.  The other connection (normally open) is connected to the antenna jack -- on transmit this connection ground the receiver RF input connection.  These two steps mutes the receiver very nicely. 

Replacing Reduction Drive

Over the years I have had several different reduction drives on the main tuning cap.  I had a kind of wonky Jackson brothers drive on there that needed to be replaced.  I put in a new one -- this smoothed out he tuning considerably. 

Ceramic Resonator

I never could get McCoy's 455 kc two crystal filter to work right.  So at first I made due with the two 455 kc IF cans.  This made for a very broad passband.  Then I put a CM filter in there.  This was more narrow, but with a lot of loss.  There may have been others.  But the filter spot is currently held by a 6 kHz wide ceramic filter.  This one is my favorite so far. 

Digital Readout

When I was running the DX-100 with the Hammarlund HQ-100 I built a little frequency readout box.  The box was from a Heath QF-1 Q multiplier (I am sorry about this).  The readouts are in Juliano Blue and come via e-bay from San Jian.  I now have it hooked up to the DX-100's oscillator.  I haven't tapped into the MMMRX's oscillator yet. 

Mike WU2D Looks at the "Dream" SW Receivers of the 1960s and 70s (Video)

Wow, I really liked Mike's walk down memory lane. I saw several of my own dream receivers: 

S-38E.  Indeed, this little monster did add some danger to your life.  AKA "The Widow Maker," I gave one to my cousin's husband so he could listen to what the commies on Radio Moscow were saying.  He later told me that the receiver had given him a shock.  I now have TWO S-38Es in my shack (two more than I really need).  I have installed isolation transformers in both of them, so they have lost the one element (danger!) that made them attractive.  

HA-600A. I got this one for Christmas in 1972.  The A model is MUCH better than the plain vanilla HA-600.  I recently got another HA-600A and found serious deficiencies in the Product Detector.  Has anyone else noticed these problems?  BACKGROUND INFO AND A PLEA FOR MORE INFO HERE: https://soldersmoke.blogspot.com/search?q=HA-600A+Product+Detector

HQ-100.  Got one in the Dominican Republic.  Fixed it up, repairing damages caused by radio life in the tropics.  Disabled the goofy audio amplifier circuitry.  I now wonder if this receiver might benefit from the insertion of a 455 kc ceramic filter. 

NC190.  Wow "Cosmic Blue"  Perhaps this was an early influence that led to "Juliano Blue?" 

HQ-180.  "18 tubes and almost as many knobs!"  FB!  

HRO-500.  Love the dial. 

Transoceanic.  Never had one, but built a BFO for the Transoceanic that W8NSA took with him to SE Asia during the war. 

R-390A.  I don't have a crane for the workbench.  

Thanks Mike -- that was a lot of fun.  

Did You Contact My Novice Station WN2QHL in 1973-1974? Please Check My List and Let Me Know

Yesterday I went through my novice logs from 1973-1974.  I was in Congers, NY and my call was WN2QHL. Please take a look at the callsigns from my log and let me know if we had a contact.  I will then let you have more details from my log. 

Novice Contacts 1973-1974 from WN2QHL

WN2NEC

WN2RTH

WA4DCL

WN4CBB

WN9LLX

WN1RWX

WN4ETR

WB2CSO

WN8QHM

WN8ONA

WN4KID

WN8PMF

WN2INN

WN2ECU

WN4DSO

WN3UCL

WN4KBL

WB4WDQ

WN0IHH

WN9MNW

WN8ODW

WA8VCH

VE1BAD

WN8NIJ

WN8MYJ

WA3TKP

WN2GMQ

WN8LDI

WN5JZP

WN5JXZ

WN2PNQ

WN2HKY

WB2PPP

WN4EIS

WN4DNV

WA8WIK

WN3TPJ

WN1RRR  WN1RPR?

W2MJR

WN2SHL

WN3TZR

W1DUQ

WN2ROW

WN2SLA

WA3HNZ

WN2JXT

W2HAG

WA2CDE

WN8ORL

WN4FYL

WN1PXM

WN2FPQ

WN4ZFF/3

WN3VDU

WN8QPJ/8

WN3TBW

WN4BWT/4 OR BWJ

W9MZO/9

WN1SLG

WN0KTR

W9KCT

WN3VKH

K1BXZ

W1AW

WA2QNX

K2BBU

K1BXZ

WN2ROZ

W1TRS

VE3FMF

WN3UPO

K1OOL

WN2RNJ

WN2KWK

WA2CDE

WN2JDE

WN3UQO

WN2IZY

W3CNN

WN2NNA

WB2EVS

VE2AJQ

WN1SBE

WN4ZIN

WA2JXM

WA3TVE/3 OR JVE OR UE

WASQWF

WA3JRU

W3ABT

WA2IWX

WN3FLK

WN1RZW

WN3TBW

WB2PYM

WN1RXM

WN2ERU

WB8HHN

WN2LVV

WB8JBM/8

WN2TEO

K4LDR

WN2EHE  Friend of KD2E Dave

K8MFO

WN2NAE

W3IN

WN3SZX

WA1EOT

W2MUM

WA2UOO

WB2RKK

W4KFL

WN2NEC

WN4EJJ

WN1SCL

WN2NQL

WA1RXJ

WA2YAS

WN2QHN

WN8POK

WB2ABJ

WN1QKD

WN2SDO

WN1SRT

WN2KOH

WN8DOB

WN1SQM

WN2SXT

W2HN

WA1RFF

WN2VNA

WN1RME

WB4YNY

WB8ALE

WN4AQM

WN4DMO

WN3USU

WN8NXE

W2HAG

WA1KLB

WB2NDL

WN2JXG

WN1RIP

WN2LKN

WA3IYA

WB9LJS

WN2RPL

K1BOM

WN4GOC

WN8QGO

WN8OPB

WN8OOE

WN2SAM

WN4FXN

WB2SXD/2

WN2IQM

WN3VUU OR UUU?

WN8PGD

WN8PIU

WN8OGY

WN8OWD

WN8OHP

WN9JOI

WN2GMQ

WN3VUR UR UUR

WN2LOC

WN2SAM

WN2TJQ

WA43PM

WA4YDR

WN9LDS OR LOS

WN9LSR

WN3UDR

WN1RGU

WA1RYL

WN2LBO

WN1RIM

WN2TAG

WN2TLQ

WN8ODP

WN2TBB OR JBB   now Dave KD2E 

WN4CRZ             First QSO with DX-100

WN4HKG

WA6TLH/HK6         FIRST DX  40 METERS   Feb 23 1974

WN2JHP

WN2TAS OR JAS

WN8QXR

W4DRJ

WN4GBX

WN4DAQ

WB8KUQ

WN4BPN

WN2SAM

WN8OVW

VE3GXX

WN0JOZ

WN6CPQ

WA4CNL

WN0LLT

WN0KUU OR KVU OR KUV

WN8QIN

WN4HLQ

K0IEU

WA1DWL

WN4GUF

VE1IC

WN4FOM

K2AVX

WA9AKY

VE2DJB

WN4EDQ

WN8PLH

WN2TPD

WN1SZS

WN4HRC

WA0WTV

VE3HEF

WN3UOO

K2IY

W4AHN

WN8OIF

WN9NYO

VE3AFX

K1PNB

K5EQX

WB6ALD

WB6LUS

WN0LQE

WA1POJ

WA5RFT

WN8NYU OR V

WN4GUF

K1BXZ

WN5GTE

WB5GDN

WB5GEN

WN2TJQ

WN2JXT

WN4CQX

WA1ASU/1

WN2IOJ

WN4GMY

WN2RUZ

WB8PRJ

WN4BTL

WB8MOI

VE3AGY

W8JEI

WN3VUZ

WA2CME

WN5KYK

WA1JUY

WN2NIL

K3DHD/9

WN4CTJ OR CWJ OR WUJ OR CVJ Gadsden AL.

WP4DRE/5

WN2GMQ

WN1SIP

WN9MOS

WN9OCO

WN2UAC

WN8NPY

WB5DIZ

WN2JHD

WN2RYH

WN2RXL

WB8OFU

WN8RTU

WN8MTW

WN8PIY

WA8JPC

K1OOL

WB2MYV

WN4CNE

WN4DXW

WN2PHE

WN8MYJ

WM2TTQ

WN4AYX

WN4ECB

WNOJGT

W4UHF

WN4FPU

WN8QCV OR U

WN8PCV

WN2STZ

WN2KLX

WN2FUN

WN2SLF

WN8RTZ/9

WN9MLY

WA7SCG

KP4USN

WN2UMV

WA6ARG

WA4BPS

WN9MAO

WN5HRI OR 4

WN2PWM

KZ5VV

ZL2ACP

WA6UUR OR VVR JACK IN Pasadena

KN5KSX

YU1NFT

YU2QZE

WA7STW

WN8RIK/4

WN2UMU

WN2PNQ

WN2QCE

YU2QZ

WN2TJQ

SolderSmoke Podcast #233: PIMP, Boatanchors, Novices, MMM, Heathkits, DC Receivers, Mailbag

SolderSmoke Podcast #233 is available. 

http://soldersmoke.com/soldersmoke233.mp3

Travelogue: Cape Cod. SST. Marconi Site.

The WFSRA:   The World Friendship Society of Radio Amateurs.

Pete's Bench:

The Pimp.
The NCX rig.
The Collins.
The many DC receivers built worldwide.
The parts shortages are real! Several key radios on hold. Si5351 sub.
Talk to G-QRP convention

Bill's Bench:

FT-8. Not for me. I tried it.
Novice Station Rebuild.
Globe V-10 VFO Deluxe.
Selenium rectifier removal CONTROVERSY?
Not crazy about my Novice station. Not crazy about CW. 
Mate for the Mighty Midget. Again. 
Mike W6MAB -- Detector problems LTSPICE Check
One more mod for MMM RX. Ceramic filter at 455.
Dropped screw inside tubular cap on Millen 61455 transformer. 
Talk to the Vienna Wireless Society
Thinking of a Moxon or a Hex beam.


BOOK REVIEW Chuck Penson WA7ZZE New Heathkit Book. http://wa7zze.com

Mailbag

-- New SPRAT is out! Hooray!
-- Todd K7TFC sent me copy of Shopcraft as Soulcraft. FB.
-- Dean KK4DAS building an EI9GQ 16 W amp. FB.
-- Jack NG2E Getting close on Pete's DC receiver.
-- JF1OZL's website is BACK!
-- Tony K3DY sent link to cool books. 
-- Sheldon VK2XZS thinking of building a phasing receiver.
-- Peter VK2EMU has joined the WFSRA. FB!
-- Ned KH7JJ from Honolulu spotted the Sideband Myth in the AWA video.
-- Chris M0LGX looking at the ET-2, asks about the variometer.
-- Pete Eaton Nov 64 anti HB rant in november 1964 QST. Wow.
-- Josh Lambert Hurley spreading FMLA stickers in the UK. FB
-- Stephen VE6STA getting ready to melt solder.
-- Got a great picture of Rogier PA1ZZ back on Bonaire.
-- Farhan reading the manual of Hans's new digital rig.
-- Paul G0OER wonders if FMLA getting ready to move on 5 meters.

N2CQR (WN2QHL) Novice Station Re-Created

 

There it is.  The 2021 re-creation of the WN2QHL Novice Amateur Radio Station.  This is what I had when I first went on the air in April 1973 from Congers, NY. 

-- I got my first Lafayette receiver (WITH JEWELED MOVEMENTS!) for Christmas in 1972.  My mom drove all the way into New Jersey to get it for me. 

-- I bought my first DX-40 and the Globe VFO Deluxe from someone in the Crystal Radio Club.

For this re-creation station: 

-- I got this recently acquired Lafayette free-for-pickup from a very kind SWL in the Shenandoah valley.  (I've discussed this receiver extensively here.) 

-- The DX-40 is the result of a couple of junkers that I bought in a hamfest some 23 or 24 years ago.  It might have been the Timonium Hamfest.  I cannabalized one of them and made one good DX-40 out of the two.  Parts of the cannabalized unit carry on the good fight as pieces of my balanced  antenna tuner (the coils were useful there) and as the chassis for my first SSB transmitter. 

-- The Globe VFO Deluxe was harder to recover.  There are just not a lot of these things around.  I actually put up a plea for one of these on the SolderSmoke blog.  Not even the IBEW could come up with one of these things.  But then, last week on Facebook I came across a fellow who was selling one.  Deal!  Check our the nice Juliano Blue light indicating 40 meter operation. 

Putting these three devices together was more challenging than I thought.  To get them to work together decently three different things had to happen as the result of throwing one switch: 

1) Antenna had to switch from receiver to transmitter. 

2) Receiver had to be largely muted (leaving some key-down signal for sidetone).  

3) VFO had to be turned on (I left it running and just keyed the DX-40).  

Fortunately I have almost 50 years more experience than I did when I first set this station up.  So I was able to do this better in 2020 than I did in 1973.   I had a 3PDT relay that I had built for a DX-60 station.  I was able to use it to do all three things described above. 

Muting the Lafayette was a bit tricky.  On the back octal connector they have two post  (1 and 3) that are normally connected.  Disconnecting 1 from 3 completely mutes the receiver by cutting off a needed ground connection to the RF amplifier and to an IF amplifier.  The Lafayette manual tells you to connect these terminals to the "muting voltage" presented by your transmitter.  The DX-40 doesn't have such a voltage, and I was reluctant to connect any voltage to this terminal for fear of blowing up the RF and IF amplifiers.  I figured that just putting a big resistor across 1 and 3 would mostly mute the receiver.  The 3PDT relay shorts this resistor on receive, un-muting the receiver. I use a 500,000 ohm resistor.  It works well, but the sidetone is chirpy while the actual signal is not.  This is a bit annoying. 

I re-capped the DX-40 when I got it back in the late 90's.  Those caps are still good. 

The Globe VFO had also been recapped.  But it still has selenium rectifiers in there.  I will change them ASAP.  Also, the Globe VFO had a somewhat mysterious second transformer in there.  I wondered what that was.  I measured the output:  6.3 V.  That is a filament transformer.  My guess is that the filament winding in the main transformer went open, maybe as a tube failed. Instead of replacing the whole transformer, they just popped in a replacement filament transformer.  That's fine. 

I've been on the air with this rig, mostly on 40, as I was as a Novice.   I can work anyone I hear on 40 meter CW and my CQ's are heard in Europe (as shown by the RBN). 

I'm struck by how physically BIG these pieces of gear are.  Much bigger than our beloved BITXs. 

Regarding T/R switching:   There was a line in the 1973 ARRL Radio Amateurs Handbook that really got to me back in 1973:  Page 640, in the chapter entitled "Assembling A Station:" "

"In any amateur station worthy of the name, it should be necessary to throw no more than one switch to go from the 'receive' to the 'transmit' condition." 

By this standard, my station was probably unworthy of the name.  I don't remember how I handled T/R changeover, VFO keying, receiver muting and sidetone,  but it almost certainly involved throwing more than one switch.  But now, I am happy to report, my novice station is finally up to the ARRL's high standards.  As Pete says, "When you know stuff you can do stuff." 

Some Thoughts on Singly Balanced Mixers with Two Diodes and One Transformer

In 2001, out it in the Azores, I built a 17 meter version of Doug DeMaw's Double Sideband transmitter ("Go QRP with Double Sideband" CQ Magazine, February 1997).  I struggled to understand the balanced modulator -- how it mixed, balanced, and how it produced DSB.  I later presented my understanding of the circuit in my book "SolderSmoke -- Global Adventures in Wireless Electronics" pages 132-137.   In essence, I figured out that you had to think of the balancing and the mixing as two separate operations: The transformer provided the balance that eliminated the carrier (the LO signal) while the diodes presented the two signals (audio from the mic amp and LO from the VFO) with a highly non-linear path.  The LO was successively turning on both diodes then turning off both diodes. The audio signal was being "chopped" at the rate of the LO.  This produced a complex waveform that contained sum and difference frequencies -- the upper and lower sidebands.  The carrier was balanced out by the transformer because the two outputs of the transformer were always of opposite polarity, and they were joined together at the output of the mixer.    

Fast forward to 2013.  I built a 17 meter version of Farhan's famous BITX 20 rig.  Above you can see the balanced modulator stage, which also serves as the product detector. As you can see, it is essentially the same circuit as the one used by Doug DeMaw in his DSB rig. 

In 2018 I built a simple direct conversion receiver for my nephew.  For the mixer I used what I considered to be just a cut-down  version of the circuit used by DeMaw and Farhan.  I got the idea for this from Olivier F5LVG and his RX-20 receiver from SPRAT.    It had the RF signal coming in on L1 and the VFO signal coming in to the wiper of the 1 k pot.  But with this arrangement, the diodes were NOT both being turned off on half the VFO cycle, then both being turned on during the other half.  Instead, as the VFO signal swung positive, D2 would conduct and D1 would shut down.  When the VFO signal swung negative,  D1 would conduct and D2 would shut down.  It worked, but the diodes were being switched in a very different way than they had been in the DeMaw and Farhan circuits.  If you have the strong LO signal going in on L1, BOTH diodes conduct, then BOTH don't conduct.  But if you have the LO going in through the pot, one diode conducts while the other does not conduct. 

After I concluded that the BJT product detector circuit in the HA-600A was causing distorted SSB and CW reception, I tried the old DeMaw/Farhan circuit, this time in product detector mode.  See above. This worked better, but I realized that this configuration was balancing out the BFO signal, and not the IF signal.  My problem with the original product detector had been that IF signal was getting simultaneous envelope detection AND product detection.  So I decided to just switch the inputs and put the IF signal into L1 (where it would be balanced) and the BFO into  R1/R2 (the 100 ohm pot). 

This seemed like it would reduce the envelope detection problem, right?  I mean, L1 is the balanced input, right?  But I wonder if we need to consider how the diodes were being switched in this arrangement.  Instead of having both conducting and then both not conducting, in this arrangement one would be conducting during half the BFO's cycle, while the other was not.  That means that at any given moment, the two output sides of the transformer would be looking into very different loads -- hardly a condition conducive to balance. But I used LTSpice to look at the audio output under the two different port arrangements.  Sherwood advised looking at the output of the product detector with the BFO turned off --there should be no output with the BFO off.  And indeed, putting the IF signal into L1 and the BFO into the R1/R2 pot resulted in less of the distortion causing envelope detection.  The way the diodes were being switched didn't seem to adversely affect the balancing out of the IF signal.  I am not sure why this doesn't seem to cause trouble. 

There was, however, another problem with the use of this circuit in the Lafayette HA-600A:  port isolation.  The BFO signal was getting back into the IF signal input on L1.   I could see it on the S-meter.  This was worrisome not only because of the S-meter, but also because the same circuit was driving the receiver's AGC -- in effect, the BFO was turning the gain down.  Theoretically, this should not have been happening.  Look at the transformer.  the BFO currents going through L2 and L3 should be of opposite polarities and should be cancelling each other out in L1.  But obviously this was not happening.  Perhaps this was the result of the sequential way the diode are switching in this arrangement.   On the bench, if I put the BFO into L1, I saw very little BFO signal at the R1/R2 junction. If I put the BFO signal into the R1/R2 junction, I was a lot of BFO signal at the top of L1.  And that is what I saw on my S-meter when this circuit was used in the HA-600A. 

On the bench,  if I turned off the BFO and put an AM modulated signal into the junction of R1/R2, I can see audio getting through once the input signal reaches 1 volt peak.  I do NOT see that kind of "breakthrough" envelope detection when (with the BFO off) I put a modulated signal into L1.  So the singly balanced circuit is doing that it is supposed to do -- it is balancing out the the signal going into L1. 

So it seemed that with the singly balanced circuit I would have to choose: suffer from the poor port isolation or AM breakthrough.   Clearly it was time to go for a doubly balanced circuit.  And that is what I did. 

Finally, I took a look at another two diode detector, the Polyakov or "subharmonic" detector. This is a really interesting circuit that can teach us a lot about how mixers work.  Here you can run the local oscillator at 1/2 the signal frequency.  With two diodes back to back, the incoming signal is being sampled TWICE during each cycle of the local oscillator.  That is equivalent to having the signal sampled at twice the local oscillator frequency.   This circuit allows you to run the oscillator at a much lower frequency -- this could allow much greater oscillator stability.  In the circuit above, with both diodes connected, a 7 MHz incoming signal would produce a 2 kHz tone. 

Another big plus of this circuit comes if you take D1 out of the circuit (as shown).  In this configuration the circuit becomes a normal diode detector.  Here it will receive a signal at 3.5 MHz, converting that signal into a 1 kHz audio tone.  So you can get a direct conversion receiver for 40 and 80 meters fairly easily. 

The VFO that I am looking for: The Globe VFO deluxe

 

I mentioned this in the last podcast.   I'm looking for one of these. I had one as a kid, and used it with a DX-40 and a Lafayette HA-600A.   It is now the only piece of gear that I need to recreate my novice station.  

Does anyone have one of these, perhaps gathering dust in some corner of the hamshack?  Please let me know.  Thanks. 

Here's the manual: 

http://www.oldtuberadio.com/data/Globe/GlobeV-10Manual.pdf

SolderSmoke Podcast #228

Soldersmoke Podcast #228 is available: 

http://soldersmoke.com/soldersmoke228.mp3

Of course, no travel.  But vaccines are here so maybe soon we can leave our shacks.

In the meantime:

I’ve been playing chess against AI bots on chess.com.

Netflix recommendation:  The Bureau.   From France. A review from NPR: 

https://www.npr.org/2020/06/22/881642358/addictively-suspenseful-thriller-series-the-bureau-will-keep-you-on-edge

A reading from "Conquering the Electron."  Germanium vs. Silicon.

Bill’s Bench:

The KLH Model Twenty-one II.  Acoustical Suspension.  First receiver WITH A PILLOW!  Bad speaker? Blown AF amp finals.  Hot heat sink.  VBE Multiplier. Desitin.

Tony Fishpool’s recommended LM386 boards.  10 for 11 bucks.  Nice.  They work.  Pictured in the Amazon ad at the upper right of the SolderSmoke blog page.

Putting a digital display on the Lafayette HA-600A

Test gear trouble.  My Radio Shack multimeter getting flaky.  I many need something better.  Auto ranging? My beloved Maplin AF generator died – will have to fix. I need that thing.  Probably a bad chip.  Good thing they are socketed.

I almost forgot about SKN!  But I remembered and I made one contact with the HT-37 and Drake 2-B.    

Pete’s Bench:

Presentation to RSGB on Homebrew.

TenTek Troubleshoot.

Swan 240?  Looking nice.

SDR adventures.

MAILBAG

Bill N8ET sent me some really nice Showa 9 MHz 8 pole crystal filters. 

Kevin AA7YQ Smoke jumper!  Building a hybrid SDR.HDR rig.  Launched blog. FB

Nick M0NTV working on similar HDR/SDR project.  Great video.

Grayson KJ7UM Hollow State Design – Launched a new blog.  Very FB!

Thomas K4SWL of SWL Post blog.  Kearsarge Mountain Transmission system.  And recent events.

Peter VK2EMU Poetry.  CW poetry.

Pete WB9FLW looking at DSB rigs…

Drew N7DA  Feels not like a real ham because he hasn’t built a quad from bamboo. Which type of landscape bamboo is best for antennas?

Ryan Flowers of MiscDotGeek.Com blog is also watching the Tally Ho YouTube videos of Leo Sampson. Wants to put a WSPR beacon on the Tally Ho. 

Joe KF5OWY  Working with diode ring mixers, trying to see the mixer action on his ‘scope. 1 and -1!

Jim AB9CN sent a cool idea about how to do a 20/17 Moxon.

Roy GM4VKI – I thanked him for his article in SPRAT about putting a 2n3904 on the output of an NE602 10P mod.  Brilliant.

Roger Hayward Told him that I really liked his Dad’s recent web site updates.

Farhan – Jokingly cursed me for showing him the Oscillodyne regen of Hugo Gernsback and Jean Shepherd.  “Now I will have to build this!”

Glowing Numerals for the Lafayette HA-600A (With Jeweled Movements)

 

I really like this receiver.  I have strong sentimental ties: it was my first SW receiver.  But the frequency readout situation was kind of rough -- depending on where you put the Main Tuning cap, your Band Spread dial could be WAY off.  

China to the rescue!  Specifically the very nice San Jian PLJ-6 frequency counter boards.  I have used these in several projects.  I like them a lot. I get mine on e-bay.  They are very cheap.  Here is the manual with specs: 

https://www.mpja.com/download/35057tebasic%20manual.pdf

As I did with my BITX20, I put mine in an Altoids-sized box.  I got to use my Goxawee rotary tool with circular metal blade to cut the rectangular hole.  Hopefully future efforts will yield neater results, but the flying sparks were fun;  they made me feel like one of those car-part  "fabricators" on cable TV. 

To tap the VFO frequency, I just put a bit of small coax at the point where the 10 pf cap from the VFO circuit enters the first mixer.  I ran this cable to the unused "Tape Recorder" jack on the back of the Lafayette -- this connects to the input of the counter.  I attached 11 volts from the power supply to an unused terminal on the accessory jack of the Lafayette -- this powers the counter.

Having a counter on the VFO proved very illuminating -- in more ways than one.  I measured the Center Frequency (CF) of my IF to be at 456 kHz.  I set the PLJ-6 to display the VFO frequency MINUS 465 kHz.   For AM broadcast signals, this worked fine:  I'd tune the signal for peak S-meter reading.  This meant that the carried was right at the CF.  

For SSB, things were a bit different.  I set the BFO knob  to be RIGHT AT 465 kHz when the dot is in the center position.  With the BFO there, I could tune in SSB signals.  The suppressed carrier would be right at the center of the IF passband, with the audio information above or below the suppressed  carrier frequency.  But it didn't sound good this way -- it sounded better if I would tune an LSB signal 2 kHz down from the center, then adjust the BFO down about 2 kHz.  This put most of the the audio in the peak portion of the IF filter(s) curve.  Doing it this way means that I have to remember that the number displayed on the PLJ-6 is 2 kHz down from the actual suppressed carrier frequency of the transmitting station.  I can live with that.  

I am going to leave the Lafayette on the corner of my workbench so that I can easily tune in hams  and SW broadcast stations.  Having modified the product detector and added the digital frequency readout makes listening to this receiver even more pleasing.  The jeweled movements are as smooth as ever. 

So 2021 is off to a good start on my workbench.  HNY to all!  

So Many Wonderful Things on W7ZOI's Site

 

There he is.  Wes Hayward, W7ZOI in 1957.  I had never seen this picture before.  I found it on Wes's recently updated "shackviews" web page: http://w7zoi.net/shackviews.html . 

There are so  many treasures on that page, and on all the other portions of Wes's site.

Some highlights for me: 

-- Wes's description of the station in the above picture. 

-- On his page about Doug DeMaw, Wes mentions that after Doug edited Wes's 1968 article about direct conversion receivers, Doug built some himself, experimenting with different product detector circuits. Having used Doug's mixer circuit in many of my rigs, and having recently experimented with different product detectors for my HA-600A, I kind of felt like Doug was watching over my shoulder, guiding me along as I experimented. 

-- Wes's use of a digital Rigol oscilloscope.  Makes me feel better about giving up on my Tek 465. 

-- The page about Farhan's visit to Wes, and the awesome gathering of homebrew Titans that ensued... 

-- Wes's meeting with Chuck Adams.  

Thanks Wes.  Happy New Year and best of luck in 2021!