Podcasting since August 2005! Listen to our latest podcast here:

Podcasting since August 2005! Listen to Latest SolderSmoke

Showing posts with label Soviet Union. Show all posts
Showing posts with label Soviet Union. Show all posts

Saturday, October 31, 2026

More Clandestine Spy Radios -- Soviet Spies in Japan during WWII -- Spies On The Air! Please Comment!

Sorge

I may have been too quick to dismiss the possibility that Soviet spies built their own radios.  Maybe they did, but with a radio specialist on the team.  Thanks to Mikele 9A3XZ for alerting us to this case. 

Here is a 1964 New York Times article on the Sorge case:  https://www.nytimes.com/1964/10/11/archives/again-the-sorge-case.html?unlocked_article_code=1.M1E.mQv_.rxy03pIehUb4&smid=url-share

Here is some great info on the radios thay used: 

The clandestine radio equipment used by Dr. Richard Sorge’s Soviet military intelligence (GRU) spy ring in Tokyo (1933–1941) was custom-built, field-assembled, and highly effective. 

Because bringing specialized espionage hardware into imperial Japan was too risky, the ring's technical mastermind and radio operator, Max Clausen, manufactured and assembled the gear locally using commercially available components and household scrap. 

Max Clausen
The technical breakdown of the "Ramsay" ring's radio setup includes:
1. The Homebrew Transmitter
Clausen built small, portable shortwave transmitters using the simplest possible circuitry to ensure reliability and easy concealment.
The Circuit Type: He heavily favored the Hartley oscillator circuit, a highly efficient and simplistic vacuum-tube configuration requiring very few parts. 
  • Power Source & Output: The transmitter generated roughly 15 watts of power. It ran on standard Japanese household AC electrical mains (100V), meaning they did not need bulky, suspicious external generators or specialized military batteries. 
  • Frequency Range: Transmission took place on amateur shortwave bands (around 7 MHz), which allowed the signal to blend in with legitimate civilian radio enthusiasts. 
2. Disguise and Concealment
The entire unit was designed to look like "household junk" if discovered during a routine police sweep. 
  • Modular Assembly: The transmitter was not kept as a single, uniform device. Clausen kept individual parts (tubes, coils, capacitors) scattered around his house. He would only assemble the working radio immediately prior to a transmission window and dismantle it directly afterward. 
  • The Cabin Cruiser / Fishing Boat Trick: As Japanese counter-intelligence began realizing an illegal radio was transmitting out of Tokyo, the ring adapted. Sorge purchased a luxury cabin cruiser. Clausen would pack the transmitter onto the boat and sail into the open sea or disguise themselves as a fishing vessel to transmit, making it completely impossible for the Japanese authorities to pin down their location using shore-based radio direction-finding (RDF) equipment. 
3. The Receiver
For receiving commands from Soviet intelligence handlers in Vladivostok, Clausen modified a standard, commercially available civilian radio receiver. By altering its internal coils, he expanded its frequency coverage to intercept shortwave military bands. It possessed exceptionally high sensitivity to pick up faint, distant signals from across the Sea of Japan. 
4. Code and Operational Security
  • One-Time Pads: Sorge's ring used a highly secure system of enciphering their Morse code messages based on numbers from a German statistical yearbook. Because the "key" changed with every single letter and was never reused, the Japanese intercept stations could read the signal but could not decrypt the messages. 
  • Radio Jargon Disguise: To further evade suspicion, Clausen heavily spiced his transmissions with casual "ham radio" lingo, making it seem like an amateur hobbyist chatting with someone abroad rather than a spy sending high-level military secrets. 
Despite the primitive and makeshift nature of this equipment, Clausen successfully transmitted over 23,000 code phrases. This included Sorge's most critical intelligence coup: confirming that Japan would strike south toward the US/Pacific instead of invading Siberia, allowing Stalin to safely redeploy his massive Siberian divisions to save Moscow from the German advance. 
The radio operations of Dr. Richard Sorge’s "Ramsay" spy ring in Tokyo are considered some of the most successful and technically fascinating in espionage history. 
The technical setup, gear, and tactics behind Sorge's communications relied heavily on a specialized approach to clandestine radio:
🛠️ The Custom-Built Hardware
Unlike many World War II intelligence networks that used factory-issued, military-grade espionage transceivers, Sorge’s equipment was entirely custom-built and home-brewed from commercially available parts. 
  • The Builder: The equipment was designed, built, and maintained by Sorge’s highly skilled radio operator, Max Clausen (a German communist and Soviet GRU agent). 
  • The Rig: Clausen constructed compact, portable shortwave transmitters and highly sensitive receivers. He bought ordinary radio components—tubes, condensers, and coils—from commercial shops across Tokyo to avoid drawing attention. 
  • Size and Capability: The transmitter had to be small enough to easily hide and transport, yet powerful enough to consistently project a signal from Tokyo all the way to a Soviet receiving station in Vladivostok. 
📡 Counter-Surveillance & Transmission Tactics
The Japanese Tokko (Special Higher Police) and military counterintelligence knew an illegal radio transmitter was operating in Tokyo, but Clausen successfully evaded their radio direction-finding (RDF) vans for six straight years. They managed this through strict transmission discipline: 
  • Constantly Moving Locations: Clausen never transmitted from the same place twice in a row. He regularly moved the equipment between various safe houses in Tokyo. 
  • The Cabin Cruiser: Sorge purchased a luxury cabin cruiser boat. Clausen would sometimes install the transmitter on the boat and broadcast from the open sea, completely confounding land-based Japanese tracking units. 
  • Brief Airtime: Transmissions were brief, highly condensed, and conducted late at night to minimize the window for the Japanese to lock onto their signal. 
🔐 The Encryption: Book Cipher & One-Time Pads
Even if the Japanese intercepted the radio waves, they could not read the content for years because of the ring's manual encryption system. 
  • The Statistical Almanac: Sorge's ring used a manual book cipher utilizing the Statistisches Reichsamt (German Statistical Almanac). 
  • The Process: Clausen would take the page numbers, columns, and figures of the almanac to serve as a random text key (or text gamma) to convert Sorge's intelligence into long strings of numbers. 
  • The Advantage: Because it was a "manual cipher," it required absolutely no mechanical cipher machines (like the German Enigma), eliminating bulky, incriminating hardware. 
🛑 The Downfall
The radio operation ultimately collapsed not because the Japanese intercepted the signal or broke the code technically, but through human counterintelligence work. In October 1941, Japanese police arrested an associate of the ring, leading a trail back to Sorge and Clausen. 
Upon Clausen's arrest, the Japanese authorities finally seized the hidden radio components. They were reportedly astonished at how Clausen had engineered such a high-performing, long-range shortwave system using nothing but simple, over-the-counter radio parts. 

Please comment on all this. 

Thursday, June 18, 2026

The RT-6 and RR-6 Motorola "Spy Set"

I don't know if this rig really qualifies as a "spy set" but it nevertheless is very interesting.   It is a tube rig, designed for use by B-47 bomber crews who could not make it back from the Soviet Union after dropping their nuclear bombs.  Supposedly they would bail out, then use these radios to call for help. Good luck with that!  Note the fold-out CW key. 

This rig was also reportedly hidden in European countries as "stay behind" assets to be used in the event of a Soviet invasion. 

 Here is a web site with more info: https://www.universal-radio.com/catalog/hamhf/rs6.html


Saturday, June 13, 2026

Sputnik, IGY, Korolev, 1 Watt

Here is the Wikipedia on Sputnik 1:  https://en.wikipedia.org/wiki/Sputnik_1

I didn't know how badly Korolev had been injured while in the Gulag. 

The transmitter had 1 watt at 20 and 40 Mhz. 


Thursday, April 24, 2025

The Copasteic Flow Blog -- German UHF Mobile CW Through a Geostationary Satellite, Agent Sonya's Homebrewing, More

It is always good to be reminded that someone out there is listening and reading,  especially when it is nice folks like Hamilton and his family. These are the people who built the TouCans rig that was (is?) suspended above San Francisco at the center of a dipole antenna.  

Following posts on the SolderSmoke blog, Hamilton has been monitoring the CW activites of a German ham who sends UHF CW signals through the sunroof of his car to the QO-100 satellite in geostationary orbit.  See above.  Very cool.  Listen live to the satellite here: 

https://eshail.batc.org.uk/nb/

Also cool is Hamilton's analysis of Agent Sonya's ability to homebrew a 1930s era CW station that could be used to communiate with Moscow Center.  Hamilton believes she could do it.  I have my doubts.  But the discussion is a lot of fun. 

Check our their blog: 

https://copaseticflow.blogspot.com/

Thanks to Hamilton and his kids! 

Saturday, April 19, 2025

Agent Sonya -- Did Soviet Spies Really Homebrew Their Rigs?

Ursula Kuczynski (Agent Sonya), 1936.Credit...via Peter Beurton

My recent blog post about the intrepid Soviet hams who homebrewed versions of the UW3DI SSB transceiver led to a comment about early Soviet era overseas intel officers who -- supposedly -- homebrewed their own transmitters and perhaps receivers.  

Here is a New York Times review of the book that mentions the homebrewing by spies:

Here's the Wiki page on Sonya:

Tony Percy took a look at the homebrew claims:

Percy seems quite well informed about radio and about how believable Sonya's claims about her radio activities were.  He uses the Morse acronym QRP, talks about Maximum Useable Frequency, discusses antennas and the relative difficulty of building a receiver.  He also talks about the need for crystal controlled transmitters if the QRP transmitter was to have any hope of reaching Moscow Center.  In sum, he thinks the reports of Sonya's radio derring-do are just nonsense.  

I agree with Tony Percy.  I just think it would be impossible to take a newcomer, show them how to scratch-build a radio, send them to a foreign country, have them buy the needed parts, expect them to build the rig and the antenna... oh and learn to use the Morse Code along the way.  I just don't think that is possible.  

Is Tony Percy a ham?  What do you folks think about the plausibility of the claims about Sonya's radio prowess?  


Friday, March 24, 2023

Homebrew AM from Cuba

Jose CO6EC sent us more information about homebrew rigs built in Cuba.  The transmitter above is a thing of beauty.   I am really glad that Jose has held on to it.  Thanks Jose! 

Jose CO6EC today

Jose CO6EC writes: 

This is another work from that time:  an AM and CW transmitter of about 100W of power, with an on-board modulator.  It was taken with some modifications from a Handbook from the 50s.  Here goes:  it was built with what we had on hand at that time, it still exists, I keep it as a relic of those years.

It used combined Soviet and American tubes in the RF sections:  Soviet 6P9 and (2) 6146.   The modulator used Soviet 12AX7, 12AUT and (2) 6P7. The 6P9 works as a crystal oscillator, and in  case of using an external VFO it works as an amplifier and doubler or tripler to obtain outputs in the  160,80,40,20,15 and 10 Meter bands. 

The VFO was also taken from a 1949 Handbook if I remember correctly, but I don't have any literature on that, as you can see in the photo it has 5 5u4c rectifier valves, VR150 voltage stabilizer, 6v6 output, another 6v6 as a separator and a 6 )I(4 (60I94?) Soviet, in the oscillator.  The stability they achieved in those years is incredible,  I could communicate with stations that were on LSB and if I didn't tell them that I was on AM they didn't notice. 

  As a receiver I used an old   Soviet AM and CW receiver, used by the Aviation HF stations   of the 40s, which no longer exists hihihihihi

I'll tell you how I tuned all that good ftuff:  First I put the receiver  in CW to beat the signal of the stations in SSB.  After hearing them clearly, I removed the oscillator of the receiver  and connected only the VFO of the Transmitter, and beat the signal with that of the receiver until I heard the other station  clearly, then I put the transmitter to work and was ready to communicate.

There were many communications made with that station, even internationally on phone  and CW. 

Today everything is easier because with transceivers it is not necessary to go through all that work, but it is always good that those who did all this work know how radio was built and made.

 73   Jose CO6EC

Obviously the transmitter

The two pictures above must be the VFO.  It looks like the VFO in the 1947 ARRL Handbook. 

I wonder what handbook this was?  Spanish language. 



Thursday, March 23, 2023

More Cuban Homebrew from the 80's and 90's -- A 160 Meter AM (Controlled Carrier) TX with Soviet 6P23s

 
160 Meter Transmitter

Jose CO6EC writes: 

I will be sending you some work of homebrew from the 80's and 90's when practically everything was manufactured by Cuban radio amateurs

The photos are of a Modulated Amplitude TX for the 160 Meter Band, about 25W of which several were made.  The final tube  was modulated in many cases by a 6DQ6, 2E26 or other similar ones that were very abundant at that time. 

This one in particular is  made with valves  6BH6 for the VFO, 6CL6 for the amplifier step and 6P23 Soviets in the final part, the modulator was made up of a 12Ax7 microphone preamplifier and a 6BM8 that came out through the cathode to the screen grid of the 6P23, in this way the carrier was controlled by modulation what we called  Carrier Control as there was no voltage on the grid at the ends there was practically no carrier  in the air which gave the impression of transmitting in SSB. hihihihihihi

For those who did not have a communications receiver, a conventional radio was adapted to receive that band, which in many cases was a VEF-206 of Soviet construction, to which an oscillator was adapted to beat the signal and get exactly on frequency. This was very popular here in the late 80's and early 90's. 




Thanks Jose.  We look forward to learning more about Cuban homebrew. The way in which radio amateurs got on the air with gear that they made themselves using the limited parts available to them is really interesting and admirable. 73  Bill 

Tuesday, February 9, 2021

Meet Your New Soviet Neighbor -- With Hallicrafters

 
Thanks to Jeff Murray for alerting us to this.  It is obviously from World War II.   If the new neighbors had S-38s, well, that might help explain why things didn't go so well.