I have had Ian on the SolderSmoke blog several times: https://soldersmoke.blogspot.com/search?q=%22Ian+Keyser%22
Podcasting since 2005! Listen to Latest SolderSmoke
Wednesday, April 3, 2024
Ian Keyser G3ROO and Spy Radios
Tuesday, March 7, 2023
SolderSmoke Podcast #244 PETE IS BACK! TR-7, CK722, BFR106, HP8640B, High-School Receiver, 10 Min TX, MAILBAG
http://soldersmoke.com/soldersmoke244.mp3
Video version at:
(118) SolderSmoke - YouTubeSunday, September 11, 2022
An Especially Good (Old) SolderSmoke Podcast
Saturday, March 26, 2022
Getting More Rigorous About Receiver Design (Video)
The author of the software seems very cool"
My name is Alfredo Accattatis; I love electronics and software, and I have been working for years in commercial companies as software/firmware engineer and software designer. I've been writing programs for embedded systems (with DSP and MICROCONTROLLERS), for PC, for Avionic Computers and even for Mainframes, using C, C++, Pascal, Ada, REXX and assembly. I starting write VA during my free time just for fun and using (also) my DSP experience. The program was and is completely FREE.
More info about Alfredo here:
https://www.sillanumsoft.org/about_the_author.htm
Do you folks think I need to buy the kind of True RMS Audio Voltmeter that is being used at the end of the above video?
Friday, November 5, 2021
The Importance of Keeping the Noise FLAT
Saturday, October 30, 2021
Using Noise to Sweep a Filter with the TinySA
Wednesday, October 20, 2021
Super-Regeneration is Super-Strange
Saturday, July 3, 2021
M0NTV's Latest Breadbox Rig -- The Radio Gods Have Spoken (TRGHS)!
Friday, March 12, 2021
The Secret Life of LEDs -- A new Tim Hunkins Video
Sunday, January 31, 2021
Repairing My Maplin Audio Waveform Generator
Thursday, September 24, 2020
Global Specialties Corporation 6000 Frequency Counter -- Anyone have a Plessey SP8630B Chip?
Continuing my effort to improve my workbench and its test gear, this week I turned to an old frequency counter that I picked up at the Kempton Park Radio Rally in London many years ago. It was not working when I got it, but long-time SolderSmoke listeners will recall the tale of woe that resulted from my having soldered a replacement IC (that Tony Fishpool G4WIF had sent me) UPSIDE down. Tough times my friends, tough times.
Well, I'm working on it again. First I converted it from 220 to 110 power. I had a transformer in the junk box that fit nicely, both electrically and mechanically. In the course of doing this, I learned something about this counter that I did not know: As long as it is plugged in, even if you turn it off, the time-base oscillator keeps running. And get this Color Burst Liberation Army members: The oscillator runs at 3.579545 MHz. TRGHS.
With sunspots scarce and with Pete pessimistic about the solar cycle, VHF and UHF now seem more interesting. I need to have more test gear for the higher frequencies. This counter works up to 650 MHz. Yea!
When I first fixed this thing, I was quite pleased to get it going with "Input A -- 5 Hz to 100 MHz." But now I want to get "Input B -- 40 MHz to 650 MHz" working also. I used a 50 MHz signal from my newly repaired HP-8640B to trouble shoot Input B. I think one of the divider chips is bad. It is a Plessey SP 8630B. Does anyone have one of these chips in their junk box?
Friday, June 12, 2020
Software for Computer Interface with NanoVNA: NanoVNASaver
Wednesday, May 27, 2020
Antennas, Money, and Ham Psychology
make it fit. (on the back fence).
WIth 5 watts CW on 40m I can hit the USA reverse beacons most mornings.
It was about £9 ($11) to make - but if you count the Spiderbeam
12m pole, it was another £98 ($120).
I have a little George Dobbs story relating to aerials. Probably around
him and have a beer with afterward.
Saturday, February 29, 2020
How to Measure Output Impedance (video)
Thanks to Tony Fishpool G4WIF for alerting us to this very useful video by Alan Wolke W2AEW.
Alan's video channel is a real treasure-trove for homebrewers.
It was very cool to see "AEW" inscribed on the function generator that Alan built 30 years ago.
Be sure to stay to the end of this video for some electronics humor from Alan. (Steve Silverman: Take note -- we might want to add this to the lexicon.)
Now I'm going to search Alan's YouTube channel for a video on how to measure input impedance.
Sunday, July 7, 2019
The Fish Soup 7 QRP Rig -- On the Air on 40 Meters (video)
I don't know why, but this weekend I got the urge to get on the air with a very low power homebrew QRP rig. I reached for my Tuna Tin 2 -- Herring Aid 5 combo. I call it the Fish Soup 7 (seven transistors in total).
I first tried to turn this rig into a transceiver by taking the VFO signal from the receiver (it is direct conversion) and using it to excite the Tuna Tin 2, but it just didn't work out. The oscillator in the Herring Air 5 is very bare bones -- no buffering and an LC circuit that is mostly L (10 uH). It became very difficult to get a stable amount of CW offset. So I went back to crystal control for the transmitter. I did replace the 5K tuning pot in the RX with a 10k 10 turn pot (thanks to W8NSA). Tuning is now very smooth. I used my old UK freq counter to monitor my receive freq. (Thanks to Tony Fishpool G4WIF-- back in 2009 he sent me the CMOS chip that brought this counter back to life.)
I was putting out about 750 milliwatts.
I had a very quick contest-like contact with K2D -- one of the "13 Colony" stations. Then a longer chat with Hank K1PUG (see video above).
I had lost my 7050 crystal, but this morning it re-appeared. TRGHS.
As you can see in the video I am using the beautiful VU3XVR key that Farhan brought me from India.
This was fun. I may try to put a VFO of some sort into the TT2, just to get more agility. But I want to keep things simple.
Look for me on 7050.