Bob N7SUR was getting discouraged. The hams at the Rickreal Hamfest didn't seem really interested in his display about homebrewing. Then THE RADIO GODS INTERVENED! (thunder). Two TITANS of homebrew appeared at Bob's table. Keep up the good work Bob, Thanks for the e-mail and the great picture of you with Wes and Jeff.
To N2CQR, N6QW
Feb 15 2015
The Salem, Oregon, Repeater Association puts on two hamfests each year
at Rickreal. This event was mentioned in SolderSmoke #78. During the
last two events I’ve taken a “science project” display and circuit
boards to encourage more hams to experiment. The boards encourage
experimenters to use software packages to design and build their own
receiver modules. It is uncommon to see this type of material at the
event.
Audience interest has been underwhelming. Perhaps a dozen participants
have shown interest in my displays. In fact, I almost left the displays
home last Saturday.
In the course of the morning, two guys approached. The older guy had a look of
familiarity. He looked like a guy in the SolderSmoke blog. Bill,
N2CQR, was pictured sitting with him in California over coffee.
I blurted out, “are you ZOI?” He replied “yes” and I told Wes Hayward,
W7ZOI, it was nice to meet him. (That was a bit of understatement).
With Wes was Jeff Damm, WA7MLH, who built many of the circuits included
in the book “Solid State Design.” I suggested to Jeff he no longer
looked like a hippie, which is the style conveyed by his webpage. Jeff
said he had recently cut his hair.
We spent more than an hour sharing ideas and discussing various topics.
My focus was on encouraging experimentation. Kit building may be a nice
first step. I want to see builders pursuing more advanced
investigations. Wes noted the software and simulation tools available
for free it’s never been a better time to try out ideas. Wes commented
on the contribution of amateurs and how we often have fewer restrictions
to pursuing our interests. He emphasized measurement tools. I should
look more at noise figure in my receiver experiments. He was very
supportive, which contrasts with my recent experiences on various
internet groups.
Wes and Jeff were looking for Rick Campbell, KK7B, and Bob Larkin,
W7PUA. Imagine, the three authors of Experimental Methods in RF Design
(EMRFD) frequenting a little hamfest in rural Oregon. Yet, few people
knew they were there.
The experience reinforced my interest in continued experimentation.
I’ll take my updated displays back next time. Perhaps our efforts reach
a larger audience than we first realize.
Bob-N7SUR
at Rickreal. This event was mentioned in SolderSmoke #78. During the
last two events I’ve taken a “science project” display and circuit
boards to encourage more hams to experiment. The boards encourage
experimenters to use software packages to design and build their own
receiver modules. It is uncommon to see this type of material at the
event.
Audience interest has been underwhelming. Perhaps a dozen participants
have shown interest in my displays. In fact, I almost left the displays
home last Saturday.
In the course of the morning, two guys approached. The older guy had a look of
familiarity. He looked like a guy in the SolderSmoke blog. Bill,
N2CQR, was pictured sitting with him in California over coffee.
I blurted out, “are you ZOI?” He replied “yes” and I told Wes Hayward,
W7ZOI, it was nice to meet him. (That was a bit of understatement).
With Wes was Jeff Damm, WA7MLH, who built many of the circuits included
in the book “Solid State Design.” I suggested to Jeff he no longer
looked like a hippie, which is the style conveyed by his webpage. Jeff
said he had recently cut his hair.
We spent more than an hour sharing ideas and discussing various topics.
My focus was on encouraging experimentation. Kit building may be a nice
first step. I want to see builders pursuing more advanced
investigations. Wes noted the software and simulation tools available
for free it’s never been a better time to try out ideas. Wes commented
on the contribution of amateurs and how we often have fewer restrictions
to pursuing our interests. He emphasized measurement tools. I should
look more at noise figure in my receiver experiments. He was very
supportive, which contrasts with my recent experiences on various
internet groups.
Wes and Jeff were looking for Rick Campbell, KK7B, and Bob Larkin,
W7PUA. Imagine, the three authors of Experimental Methods in RF Design
(EMRFD) frequenting a little hamfest in rural Oregon. Yet, few people
knew they were there.
The experience reinforced my interest in continued experimentation.
I’ll take my updated displays back next time. Perhaps our efforts reach
a larger audience than we first realize.
Bob-N7SUR
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Posts
wow wow wow ....look at this guys.when i was a little boy i was stealling qst magazines so i could watch schematics of legendary (mountain )Wess :))).i am so glad to see this people.....9a3xz
ReplyDelete