FS: ART-13
-
Tested a few years ago at K3HVG's QTH and it worked fine! Unused since
then.
Pickup Only. Sold as is. $350 OBO
Can deliver to the York PA Hamfest on ...
3 hours ago
Serving the worldwide community of radio-electronic homebrewers. Providing blog support to the SolderSmoke podcast: http://soldersmoke.com
Solar X-rays: Geomagnetic Field: |
Before being used for with a project, should the planks be appropriately distressed with solder, an iron, or other appropriate device to assure their fitness for the project? What is needed to add some mojo to the wood to help the project be successful?
ReplyDeleteNo special treatment needed David. Because they were intended for use in cooking, these planks are covered by the rules for breadboard mojo.
ReplyDeleteAgreed. Shep, Schwartz, Bollis and Wolfgang Puck would all approve, tho the XYL may not. Such is the life of the intrepid homebrewer.
DeleteI believe these stores are also known as "Whole Paycheck" for reasons that become obvious when you reach the check-out.
ReplyDeleteThis comment has been removed by the author.
ReplyDelete